clocksource: Add Marvell Orion SoC timer

This patch add a DT enabled driver for timers found on Marvell Orion SoCs
(Kirkwood, Dove, Orion5x, and Discovery Innovation). It installs a free-
running clocksource on timer0 and a clockevent source on timer1.
Corresponding device tree documentation is also added.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>

Documentation/devicetree/bindings/timer/marvell,orion-timer.txt

+Marvell Orion SoC timer
+
+Required properties:
+- compatible: shall be "marvell,orion-timer"
+- reg: base address of the timer register starting with TIMERS CONTROL register
+- interrupt-parent: phandle of the bridge interrupt controller
+- interrupts: should contain the interrupts for Timer0 and Timer1
+- clocks: phandle of timer reference clock (tclk)
+
+Example:
+	timer: timer {
+		compatible = "marvell,orion-timer";
+		reg = <0x20300 0x20>;
+		interrupt-parent = <&bridge_intc>;
+		interrupts = <1>, <2>;
+		clocks = <&core_clk 0>;
+	};

drivers/clocksource/Kconfig

@@ -25,6 +25,11 @@ config DW_APB_TIMER_OF
 config ARMADA_370_XP_TIMER
 	bool
 
+config ORION_TIMER
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+	bool
+
 config SUN4I_TIMER
 	bool
 

drivers/clocksource/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
+obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
 obj-$(CONFIG_ARCH_MARCO)	+= timer-marco.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o

drivers/clocksource/time-orion.c

+/*
+ * Marvell Orion SoC timer handling.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <asm/sched_clock.h>
+
+#define TIMER_CTRL		0x00
+#define  TIMER0_EN		BIT(0)
+#define  TIMER0_RELOAD_EN	BIT(1)
+#define  TIMER1_EN		BIT(2)
+#define  TIMER1_RELOAD_EN	BIT(3)
+#define TIMER0_RELOAD		0x10
+#define TIMER0_VAL		0x14
+#define TIMER1_RELOAD		0x18
+#define TIMER1_VAL		0x1c
+
+#define ORION_ONESHOT_MIN	1
+#define ORION_ONESHOT_MAX	0xfffffffe
+
+static void __iomem *timer_base;
+static DEFINE_SPINLOCK(timer_ctrl_lock);
+
+/*
+ * Thread-safe access to TIMER_CTRL register
+ * (shared with watchdog timer)
+ */
+void orion_timer_ctrl_clrset(u32 clr, u32 set)
+{
+	spin_lock(&timer_ctrl_lock);
+	writel((readl(timer_base + TIMER_CTRL) & ~clr) | set,
+		timer_base + TIMER_CTRL);
+	spin_unlock(&timer_ctrl_lock);
+}
+EXPORT_SYMBOL(orion_timer_ctrl_clrset);
+
+/*
+ * Free-running clocksource handling.
+ */
+static u32 notrace orion_read_sched_clock(void)
+{
+	return ~readl(timer_base + TIMER0_VAL);
+}
+
+/*
+ * Clockevent handling.
+ */
+static u32 ticks_per_jiffy;
+
+static int orion_clkevt_next_event(unsigned long delta,
+				   struct clock_event_device *dev)
+{
+	/* setup and enable one-shot timer */
+	writel(delta, timer_base + TIMER1_VAL);
+	orion_timer_ctrl_clrset(TIMER1_RELOAD_EN, TIMER1_EN);
+
+	return 0;
+}
+
+static void orion_clkevt_mode(enum clock_event_mode mode,
+			      struct clock_event_device *dev)
+{
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		/* setup and enable periodic timer at 1/HZ intervals */
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
+		orion_timer_ctrl_clrset(0, TIMER1_RELOAD_EN | TIMER1_EN);
+	} else {
+		/* disable timer */
+		orion_timer_ctrl_clrset(TIMER1_RELOAD_EN | TIMER1_EN, 0);
+	}
+}
+
+static struct clock_event_device orion_clkevt = {
+	.name		= "orion_event",
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= orion_clkevt_next_event,
+	.set_mode	= orion_clkevt_mode,
+};
+
+static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
+{
+	orion_clkevt.event_handler(&orion_clkevt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction orion_clkevt_irq = {
+	.name		= "orion_event",
+	.flags		= IRQF_TIMER,
+	.handler	= orion_clkevt_irq_handler,
+};
+
+static void __init orion_timer_init(struct device_node *np)
+{
+	struct clk *clk;
+	int irq;
+
+	/* timer registers are shared with watchdog timer */
+	timer_base = of_iomap(np, 0);
+	if (!timer_base)
+		panic("%s: unable to map resource\n", np->name);
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk))
+		panic("%s: unable to get clk\n", np->name);
+	clk_prepare_enable(clk);
+
+	/* we are only interested in timer1 irq */
+	irq = irq_of_parse_and_map(np, 1);
+	if (irq <= 0)
+		panic("%s: unable to parse timer1 irq\n", np->name);
+
+	/* setup timer0 as free-running clocksource */
+	writel(~0, timer_base + TIMER0_VAL);
+	writel(~0, timer_base + TIMER0_RELOAD);
+	orion_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | TIMER0_EN);
+	clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
+			      clk_get_rate(clk), 300, 32,
+			      clocksource_mmio_readl_down);
+	setup_sched_clock(orion_read_sched_clock, 32, clk_get_rate(clk));
+
+	/* setup timer1 as clockevent timer */
+	if (setup_irq(irq, &orion_clkevt_irq))
+		panic("%s: unable to setup irq\n", np->name);
+
+	ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
+	orion_clkevt.cpumask = cpumask_of(0);
+	orion_clkevt.irq = irq;
+	clockevents_config_and_register(&orion_clkevt, clk_get_rate(clk),
+					ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
+}
+CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);