net: get rid of multiple bond-related netdevice->priv_flags

Now when bond-related code is moved from net/core/dev.c into bonding
code, multiple priv_flags are not needed anymore. So let them rot.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Reviewed-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_main.c

@@ -1458,20 +1458,20 @@ static void bond_setup_by_slave(struct net_device *bond_dev,
  * ARP on active-backup slaves with arp_validate enabled.
  */
 static bool bond_should_deliver_exact_match(struct sk_buff *skb,
-					    struct net_device *slave_dev,
-					    struct net_device *bond_dev)
+					    struct slave *slave,
+					    struct bonding *bond)
 {
-	if (slave_dev->priv_flags & IFF_SLAVE_INACTIVE) {
-		if (slave_dev->priv_flags & IFF_SLAVE_NEEDARP &&
+	if (slave->dev->priv_flags & IFF_SLAVE_INACTIVE) {
+		if (slave_do_arp_validate(bond, slave) &&
 		    skb->protocol == __cpu_to_be16(ETH_P_ARP))
 			return false;
 
-		if (bond_dev->priv_flags & IFF_MASTER_ALB &&
+		if (bond->params.mode == BOND_MODE_ALB &&
 		    skb->pkt_type != PACKET_BROADCAST &&
 		    skb->pkt_type != PACKET_MULTICAST)
 				return false;
 
-		if (bond_dev->priv_flags & IFF_MASTER_8023AD &&
+		if (bond->params.mode == BOND_MODE_8023AD &&
 		    skb->protocol == __cpu_to_be16(ETH_P_SLOW))
 			return false;
 
@@ -1484,6 +1484,7 @@ static struct sk_buff *bond_handle_frame(struct sk_buff *skb)
 {
 	struct slave *slave;
 	struct net_device *bond_dev;
+	struct bonding *bond;
 
 	skb = skb_share_check(skb, GFP_ATOMIC);
 	if (unlikely(!skb))
@@ -1494,17 +1495,19 @@ static struct sk_buff *bond_handle_frame(struct sk_buff *skb)
 	if (unlikely(!bond_dev))
 		return skb;
 
-	if (bond_dev->priv_flags & IFF_MASTER_ARPMON)
+	bond = netdev_priv(bond_dev);
+
+	if (bond->params.arp_interval)
 		slave->dev->last_rx = jiffies;
 
-	if (bond_should_deliver_exact_match(skb, slave->dev, bond_dev)) {
+	if (bond_should_deliver_exact_match(skb, slave, bond)) {
 		skb->deliver_no_wcard = 1;
 		return skb;
 	}
 
 	skb->dev = bond_dev;
 
-	if (bond_dev->priv_flags & IFF_MASTER_ALB &&
+	if (bond->params.mode == BOND_MODE_ALB &&
 	    bond_dev->priv_flags & IFF_BRIDGE_PORT &&
 	    skb->pkt_type == PACKET_HOST) {
 
@@ -2119,9 +2122,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	dev_set_mtu(slave_dev, slave->original_mtu);
 
-	slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
-				   IFF_SLAVE_INACTIVE | IFF_BONDING |
-				   IFF_SLAVE_NEEDARP);
+	slave_dev->priv_flags &= ~(IFF_SLAVE_INACTIVE | IFF_BONDING);
 
 	kfree(slave);
 
@@ -2232,8 +2233,7 @@ static int bond_release_all(struct net_device *bond_dev)
 			dev_set_mac_address(slave_dev, &addr);
 		}
 
-		slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
-					   IFF_SLAVE_INACTIVE);
+		slave_dev->priv_flags &= ~IFF_SLAVE_INACTIVE;
 
 		kfree(slave);
 
@@ -4419,11 +4419,9 @@ void bond_set_mode_ops(struct bonding *bond, int mode)
 	case BOND_MODE_BROADCAST:
 		break;
 	case BOND_MODE_8023AD:
-		bond_set_master_3ad_flags(bond);
 		bond_set_xmit_hash_policy(bond);
 		break;
 	case BOND_MODE_ALB:
-		bond_set_master_alb_flags(bond);
 		/* FALLTHRU */
 	case BOND_MODE_TLB:
 		break;
@@ -4514,9 +4512,6 @@ static void bond_setup(struct net_device *bond_dev)
 	bond_dev->priv_flags |= IFF_BONDING;
 	bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 
-	if (bond->params.arp_interval)
-		bond_dev->priv_flags |= IFF_MASTER_ARPMON;
-
 	/* At first, we block adding VLANs. That's the only way to
 	 * prevent problems that occur when adding VLANs over an
 	 * empty bond. The block will be removed once non-challenged

drivers/net/bonding/bond_sysfs.c

@@ -325,11 +325,6 @@ static ssize_t bonding_store_mode(struct device *d,
 		ret = -EINVAL;
 		goto out;
 	}
-	if (bond->params.mode == BOND_MODE_8023AD)
-		bond_unset_master_3ad_flags(bond);
-
-	if (bond->params.mode == BOND_MODE_ALB)
-		bond_unset_master_alb_flags(bond);
 
 	bond->params.mode = new_value;
 	bond_set_mode_ops(bond, bond->params.mode);
@@ -530,8 +525,6 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 	pr_info("%s: Setting ARP monitoring interval to %d.\n",
 		bond->dev->name, new_value);
 	bond->params.arp_interval = new_value;
-	if (bond->params.arp_interval)
-		bond->dev->priv_flags |= IFF_MASTER_ARPMON;
 	if (bond->params.miimon) {
 		pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
 			bond->dev->name, bond->dev->name);
@@ -1007,7 +1000,6 @@ static ssize_t bonding_store_miimon(struct device *d,
 			pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
 				bond->dev->name);
 			bond->params.arp_interval = 0;
-			bond->dev->priv_flags &= ~IFF_MASTER_ARPMON;
 			if (bond->params.arp_validate) {
 				bond_unregister_arp(bond);
 				bond->params.arp_validate =

drivers/net/bonding/bonding.h

@@ -356,34 +356,12 @@ static inline void bond_set_slave_inactive_flags(struct slave *slave)
 		slave->state = BOND_STATE_BACKUP;
 	if (!bond->params.all_slaves_active)
 		slave->dev->priv_flags |= IFF_SLAVE_INACTIVE;
-	if (slave_do_arp_validate(bond, slave))
-		slave->dev->priv_flags |= IFF_SLAVE_NEEDARP;
 }
 
 static inline void bond_set_slave_active_flags(struct slave *slave)
 {
 	slave->state = BOND_STATE_ACTIVE;
-	slave->dev->priv_flags &= ~(IFF_SLAVE_INACTIVE | IFF_SLAVE_NEEDARP);
-}
-
-static inline void bond_set_master_3ad_flags(struct bonding *bond)
-{
-	bond->dev->priv_flags |= IFF_MASTER_8023AD;
-}
-
-static inline void bond_unset_master_3ad_flags(struct bonding *bond)
-{
-	bond->dev->priv_flags &= ~IFF_MASTER_8023AD;
-}
-
-static inline void bond_set_master_alb_flags(struct bonding *bond)
-{
-	bond->dev->priv_flags |= IFF_MASTER_ALB;
-}
-
-static inline void bond_unset_master_alb_flags(struct bonding *bond)
-{
-	bond->dev->priv_flags &= ~IFF_MASTER_ALB;
+	slave->dev->priv_flags &= ~IFF_SLAVE_INACTIVE;
 }
 
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);