b43: LCN-PHY: minor fixes

The biggest change is reversing order of reading 32-bit table value.
MMIO dumps has shown it's done that way for LCN-PHY.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/b43.h

@@ -110,6 +110,8 @@
 #define B43_MMIO_TSF_CFP_START_LOW	0x604
 #define B43_MMIO_TSF_CFP_START_HIGH	0x606
 #define B43_MMIO_TSF_CFP_PRETBTT	0x612
+#define B43_MMIO_TSF_CLK_FRAC_LOW	0x62E
+#define B43_MMIO_TSF_CLK_FRAC_HIGH	0x630
 #define B43_MMIO_TSF_0			0x632	/* core rev < 3 only */
 #define B43_MMIO_TSF_1			0x634	/* core rev < 3 only */
 #define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */

drivers/net/wireless/b43/main.c

@@ -2953,6 +2953,7 @@ static void b43_rate_memory_init(struct b43_wldev *dev)
 	case B43_PHYTYPE_N:
 	case B43_PHYTYPE_LP:
 	case B43_PHYTYPE_HT:
+	case B43_PHYTYPE_LCN:
 		b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
 		b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
 		b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);

drivers/net/wireless/b43/tables_phy_lcn.c

@@ -318,9 +318,8 @@ u32 b43_lcntab_read(struct b43_wldev *dev, u32 offset)
 		break;
 	case B43_LCNTAB_32BIT:
 		b43_phy_write(dev, B43_PHY_LCN_TABLE_ADDR, offset);
-		value = b43_phy_read(dev, B43_PHY_LCN_TABLE_DATAHI);
-		value <<= 16;
-		value |= b43_phy_read(dev, B43_PHY_LCN_TABLE_DATALO);
+		value = b43_phy_read(dev, B43_PHY_LCN_TABLE_DATALO);
+		value |= (b43_phy_read(dev, B43_PHY_LCN_TABLE_DATAHI) << 16);
 		break;
 	default:
 		B43_WARN_ON(1);
@@ -357,10 +356,9 @@ void b43_lcntab_read_bulk(struct b43_wldev *dev, u32 offset,
 			break;
 		case B43_LCNTAB_32BIT:
 			*((u32 *)data) = b43_phy_read(dev,
-						      B43_PHY_LCN_TABLE_DATAHI);
-			*((u32 *)data) <<= 16;
-			*((u32 *)data) |= b43_phy_read(dev,
 						B43_PHY_LCN_TABLE_DATALO);
+			*((u32 *)data) |= (b43_phy_read(dev,
+					   B43_PHY_LCN_TABLE_DATAHI) << 16);
 			data += 4;
 			break;
 		default: