提交 0aca2369 编写于 作者: S Sven Eckelmann 提交者: Antonio Quartulli

batman-adv: Fix alignment after opened parentheses

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
上级 cb4cca71
......@@ -111,6 +111,11 @@ static int batadv_log_release(struct inode *inode, struct file *file)
return 0;
}
static int batadv_log_empty(struct batadv_debug_log *debug_log)
{
return !(debug_log->log_start - debug_log->log_end);
}
static ssize_t batadv_log_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
......@@ -120,8 +125,7 @@ static ssize_t batadv_log_read(struct file *file, char __user *buf,
char *char_addr;
char c;
if ((file->f_flags & O_NONBLOCK) &&
!(debug_log->log_end - debug_log->log_start))
if ((file->f_flags & O_NONBLOCK) && batadv_log_empty(debug_log))
return -EAGAIN;
if (!buf)
......@@ -134,7 +138,7 @@ static ssize_t batadv_log_read(struct file *file, char __user *buf,
return -EFAULT;
error = wait_event_interruptible(debug_log->queue_wait,
(debug_log->log_start - debug_log->log_end));
(!batadv_log_empty(debug_log)));
if (error)
return error;
......@@ -175,7 +179,7 @@ static unsigned int batadv_log_poll(struct file *file, poll_table *wait)
poll_wait(file, &debug_log->queue_wait, wait);
if (debug_log->log_end - debug_log->log_start)
if (!batadv_log_empty(debug_log))
return POLLIN | POLLRDNORM;
return 0;
......@@ -370,9 +374,9 @@ int batadv_debugfs_add_meshif(struct net_device *dev)
for (bat_debug = batadv_mesh_debuginfos; *bat_debug; ++bat_debug) {
file = debugfs_create_file(((*bat_debug)->attr).name,
S_IFREG | ((*bat_debug)->attr).mode,
bat_priv->debug_dir,
dev, &(*bat_debug)->fops);
S_IFREG | ((*bat_debug)->attr).mode,
bat_priv->debug_dir,
dev, &(*bat_debug)->fops);
if (!file) {
batadv_err(dev, "Can't add debugfs file: %s/%s\n",
dev->name, ((*bat_debug)->attr).name);
......
......@@ -324,15 +324,15 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
batadv_info(hard_iface->soft_iface, "Adding interface: %s\n",
hard_iface->net_dev->name);
if (atomic_read(&bat_priv->fragmentation) && hard_iface->net_dev->mtu <
ETH_DATA_LEN + BATADV_HEADER_LEN)
if (atomic_read(&bat_priv->fragmentation) &&
hard_iface->net_dev->mtu < ETH_DATA_LEN + BATADV_HEADER_LEN)
batadv_info(hard_iface->soft_iface,
"The MTU of interface %s is too small (%i) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to %zi would solve the problem.\n",
hard_iface->net_dev->name, hard_iface->net_dev->mtu,
ETH_DATA_LEN + BATADV_HEADER_LEN);
if (!atomic_read(&bat_priv->fragmentation) && hard_iface->net_dev->mtu <
ETH_DATA_LEN + BATADV_HEADER_LEN)
if (!atomic_read(&bat_priv->fragmentation) &&
hard_iface->net_dev->mtu < ETH_DATA_LEN + BATADV_HEADER_LEN)
batadv_info(hard_iface->soft_iface,
"The MTU of interface %s is too small (%i) to handle the transport of batman-adv packets. If you experience problems getting traffic through try increasing the MTU to %zi.\n",
hard_iface->net_dev->name, hard_iface->net_dev->mtu,
......
......@@ -413,6 +413,7 @@ int batadv_orig_seq_print_text(struct seq_file *seq, void *offset)
int batman_count = 0;
int last_seen_secs;
int last_seen_msecs;
unsigned long last_seen_jiffies;
uint32_t i;
int ret = 0;
......@@ -451,10 +452,10 @@ int batadv_orig_seq_print_text(struct seq_file *seq, void *offset)
if (neigh_node->tq_avg == 0)
goto next;
last_seen_secs = jiffies_to_msecs(jiffies -
orig_node->last_seen) / 1000;
last_seen_msecs = jiffies_to_msecs(jiffies -
orig_node->last_seen) % 1000;
last_seen_jiffies = jiffies - orig_node->last_seen;
last_seen_msecs = jiffies_to_msecs(last_seen_jiffies);
last_seen_secs = last_seen_msecs / 1000;
last_seen_msecs = last_seen_msecs % 1000;
seq_printf(seq, "%pM %4i.%03is (%3i) %pM [%10s]:",
orig_node->orig, last_seen_secs,
......
......@@ -969,8 +969,7 @@ static int batadv_check_unicast_ttvn(struct batadv_priv *bat_priv,
ETH_HLEN) < 0)
return 0;
ethhdr = (struct ethhdr *)(skb->data +
sizeof(struct batadv_unicast_packet));
ethhdr = (struct ethhdr *)(skb->data + sizeof(*unicast_packet));
/* we don't have an updated route for this client, so we should
* not try to reroute the packet!!
......
......@@ -296,6 +296,7 @@ int batadv_unicast_send_skb(struct sk_buff *skb, struct batadv_priv *bat_priv)
struct batadv_neigh_node *neigh_node;
int data_len = skb->len;
int ret = 1;
unsigned int dev_mtu;
/* get routing information */
if (is_multicast_ether_addr(ethhdr->h_dest)) {
......@@ -344,9 +345,9 @@ int batadv_unicast_send_skb(struct sk_buff *skb, struct batadv_priv *bat_priv)
if (batadv_tt_global_client_is_roaming(bat_priv, ethhdr->h_dest))
unicast_packet->ttvn = unicast_packet->ttvn - 1;
dev_mtu = neigh_node->if_incoming->net_dev->mtu;
if (atomic_read(&bat_priv->fragmentation) &&
data_len + sizeof(*unicast_packet) >
neigh_node->if_incoming->net_dev->mtu) {
data_len + sizeof(*unicast_packet) > dev_mtu) {
/* send frag skb decreases ttl */
unicast_packet->header.ttl++;
ret = batadv_frag_send_skb(skb, bat_priv,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册