提交 0a95f563 编写于 作者: B Ben Hutchings 提交者: Jeff Garzik

sfc: Clean up non-volatile memory partitioning

Move flash and EEPROM partition boundary constants into spi.h and rename
them to be consistent.

Add a comment on the partitioning.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 2883f552
......@@ -172,10 +172,7 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = {
/* Number of ethtool statistics */
#define EFX_ETHTOOL_NUM_STATS ARRAY_SIZE(efx_ethtool_stats)
/* EEPROM range with gPXE configuration */
#define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB
#define EFX_ETHTOOL_EEPROM_MIN 0x800U
#define EFX_ETHTOOL_EEPROM_MAX 0x1800U
/**************************************************************************
*
......@@ -545,8 +542,8 @@ static int efx_ethtool_get_eeprom_len(struct net_device *net_dev)
if (!spi)
return 0;
return min(spi->size, EFX_ETHTOOL_EEPROM_MAX) -
min(spi->size, EFX_ETHTOOL_EEPROM_MIN);
return min(spi->size, EFX_EEPROM_BOOTCONFIG_END) -
min(spi->size, EFX_EEPROM_BOOTCONFIG_START);
}
static int efx_ethtool_get_eeprom(struct net_device *net_dev,
......@@ -557,7 +554,7 @@ static int efx_ethtool_get_eeprom(struct net_device *net_dev,
size_t len;
int rc;
rc = falcon_spi_read(spi, eeprom->offset + EFX_ETHTOOL_EEPROM_MIN,
rc = falcon_spi_read(spi, eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
eeprom->len, &len, buf);
eeprom->magic = EFX_ETHTOOL_EEPROM_MAGIC;
eeprom->len = len;
......@@ -575,7 +572,7 @@ static int efx_ethtool_set_eeprom(struct net_device *net_dev,
if (eeprom->magic != EFX_ETHTOOL_EEPROM_MAGIC)
return -EINVAL;
rc = falcon_spi_write(spi, eeprom->offset + EFX_ETHTOOL_EEPROM_MIN,
rc = falcon_spi_write(spi, eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
eeprom->len, &len, buf);
eeprom->len = len;
return rc;
......
......@@ -2253,13 +2253,13 @@ int falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
__le16 *word, *limit;
u32 csum;
region = kmalloc(NVCONFIG_END, GFP_KERNEL);
region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL);
if (!region)
return -ENOMEM;
nvconfig = region + NVCONFIG_OFFSET;
spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom;
rc = falcon_spi_read(spi, 0, NVCONFIG_END, NULL, region);
rc = falcon_spi_read(spi, 0, FALCON_NVCONFIG_END, NULL, region);
if (rc) {
EFX_ERR(efx, "Failed to read %s\n",
efx->spi_flash ? "flash" : "EEPROM");
......@@ -2283,7 +2283,7 @@ int falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
limit = (__le16 *) (nvconfig + 1);
} else {
word = region;
limit = region + NVCONFIG_END;
limit = region + FALCON_NVCONFIG_END;
}
for (csum = 0; word < limit; ++word)
csum += le16_to_cpu(*word);
......
......@@ -1150,7 +1150,6 @@ struct falcon_nvconfig_board_v3 {
(((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(EFX_WIDTH(field)))
#define NVCONFIG_OFFSET 0x300
#define NVCONFIG_END 0x400
#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
struct falcon_nvconfig {
......
......@@ -63,4 +63,21 @@ int falcon_spi_read(const struct efx_spi_device *spi, loff_t start,
int falcon_spi_write(const struct efx_spi_device *spi, loff_t start,
size_t len, size_t *retlen, const u8 *buffer);
/*
* SFC4000 flash is partitioned into:
* 0-0x400 chip and board config (see falcon_hwdefs.h)
* 0x400-0x8000 unused (or may contain VPD if EEPROM not present)
* 0x8000-end boot code (mapped to PCI expansion ROM)
* SFC4000 small EEPROM (size < 0x400) is used for VPD only.
* SFC4000 large EEPROM (size >= 0x400) is partitioned into:
* 0-0x400 chip and board config
* configurable VPD
* 0x800-0x1800 boot config
* Aside from the chip and board config, all of these are optional and may
* be absent or truncated depending on the devices used.
*/
#define FALCON_NVCONFIG_END 0x400U
#define EFX_EEPROM_BOOTCONFIG_START 0x800U
#define EFX_EEPROM_BOOTCONFIG_END 0x1800U
#endif /* EFX_SPI_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册