drm/amd/display: move VGA to HWSS from TG

Signed-off-by: NTony Cheng <tony.cheng@amd.com>
Reviewed-by: NZeyu Fan <Zeyu.Fan@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h

@@ -170,7 +170,12 @@
 	SR(DIO_MEM_PWR_CTRL), \
 	SR(DCCG_GATE_DISABLE_CNTL), \
 	SR(DCCG_GATE_DISABLE_CNTL2), \
-	SR(DCFCLK_CNTL)
+	SR(DCFCLK_CNTL),\
+	SR(DCFCLK_CNTL), \
+	SR(D1VGA_CONTROL), \
+	SR(D2VGA_CONTROL), \
+	SR(D3VGA_CONTROL), \
+	SR(D4VGA_CONTROL)
 #endif
 
 #if defined(CONFIG_DRM_AMD_DC_DCN1_0)
@@ -236,6 +241,10 @@ struct dce_hwseq_registers {
 	uint32_t MPC_CRC_RESULT_GB;
 	uint32_t MPC_CRC_RESULT_C;
 	uint32_t MPC_CRC_RESULT_AR;
+	uint32_t D1VGA_CONTROL;
+	uint32_t D2VGA_CONTROL;
+	uint32_t D3VGA_CONTROL;
+	uint32_t D4VGA_CONTROL;
 #endif
 };
  /* set field name */

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -1198,7 +1198,8 @@ static void disable_vga_and_power_gate_all_controllers(
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
 		tg = dc->res_pool->timing_generators[i];
 
-		tg->funcs->disable_vga(tg);
+		if (tg->funcs->disable_vga)
+			tg->funcs->disable_vga(tg);
 
 		/* Enable CLOCK gating for each pipe BEFORE controller
 		 * powergating. */

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -163,6 +163,15 @@ static void enable_power_gating_plane(
 	REG_UPDATE(DOMAIN7_PG_CONFIG, DOMAIN7_POWER_FORCEON, force_on);
 }
 
+static void disable_vga(
+	struct dce_hwseq *hws)
+{
+	REG_WRITE(D1VGA_CONTROL, 0);
+	REG_WRITE(D2VGA_CONTROL, 0);
+	REG_WRITE(D3VGA_CONTROL, 0);
+	REG_WRITE(D4VGA_CONTROL, 0);
+}
+
 static void dpp_pg_control(
 		struct dce_hwseq *hws,
 		unsigned int dpp_inst,
@@ -312,6 +321,8 @@ static void dcn10_init_hw(struct core_dc *dc)
 
 	bios_golden_init(dc);
 
+	disable_vga(dc->hwseq);
+
 	for (i = 0; i < dc->link_count; i++) {
 		/* Power up AND update implementation according to the
 		 * required signal (which may be different from the
@@ -335,7 +346,6 @@ static void dcn10_init_hw(struct core_dc *dc)
 		mpcc_cfg.top_of_tree = true;
 		mpcc->funcs->set(mpcc, &mpcc_cfg);
 
-		tg->funcs->disable_vga(tg);
 		/* Blank controller using driver code instead of
 		 * command table.
 		 */

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_timing_generator.c

@@ -447,43 +447,6 @@ static void tgn10_program_blank_color(
 			OTG_BLACK_COLOR_R_CR, black_color->color_r_cr);
 }
 
-/**
- * dcn10_dcn10_timing_generator_disable_vga
- * Turn OFF VGA Mode and Timing  - DxVGA_CONTROL
- * VGA Mode and VGA Timing is used by VBIOS on CRT Monitors;
- */
-/* TODO FPGA FPGA setup is done by Diag which does not enable VGA mode.
- * VGA is disable by ASIC default. This function is not needed for
- * FPGA story.
- * usage:
- * init_hw  within dc.c
- * disable_vga_and_power_gate_all_controllers within dce110_hw_sequencer.c
- * We may move init_hw into DC specific so that we can remove
- * .disable_vga from upper layer stack
- */
-static void tgn10_disable_vga(
-			struct timing_generator *tg)
-{
-	struct dcn10_timing_generator *tgn10 = DCN10TG_FROM_TG(tg);
-
-	switch (tgn10->base.inst) {
-	case 0:
-		REG_WRITE(D1VGA_CONTROL, 0);
-		break;
-	case 1:
-		REG_WRITE(D2VGA_CONTROL, 0);
-		break;
-	case 2:
-		REG_WRITE(D2VGA_CONTROL, 0);
-		break;
-	case 3:
-		REG_WRITE(D4VGA_CONTROL, 0);
-		break;
-	default:
-		break;
-	}
-}
-
 static bool tgn10_validate_timing(
 	struct timing_generator *tg,
 	const struct dc_crtc_timing *timing)
@@ -1144,7 +1107,6 @@ static struct timing_generator_funcs dcn10_tg_funcs = {
 		.set_blank = tgn10_set_blank,
 		.is_blanked = tgn10_is_blanked,
 		.set_blank_color = tgn10_program_blank_color,
-		.disable_vga = tgn10_disable_vga,
 		.did_triggered_reset_occur = tgn10_did_triggered_reset_occur,
 		.enable_reset_trigger = tgn10_enable_reset_trigger,
 		.disable_reset_trigger = tgn10_disable_reset_trigger,