提交 09cd5b8f 编写于 作者: L Linus Torvalds

Merge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix up T-bit error handling in SH-4A mutex fastpath.
  sh: Fix up spurious syscall restarting.
  sh: fcnvds fix with denormalized numbers on SH-4 FPU.
  sh: Only reserve memory under CONFIG_ZERO_PAGE_OFFSET when it != 0.
  sh: Handle calling csum_partial with misaligned data
  sh: ap325rxa: Enable ov772x in defconfig.
  sh: ap325rxa: Add ov772x support.
  sh: ap325rxa: control camera power toggling.
  sh: mach-migor: Enable ov772x and tw9910 in defconfig.
......@@ -22,6 +22,7 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <media/ov772x.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
......@@ -216,7 +217,14 @@ static struct platform_device lcdc_device = {
},
};
static void camera_power(int val)
{
gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
mdelay(10);
}
#ifdef CONFIG_I2C
/* support for the old ncm03j camera */
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
......@@ -237,6 +245,23 @@ static unsigned char camera_ncm03j_magic[] =
0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
};
static int camera_probe(void)
{
struct i2c_adapter *a = i2c_get_adapter(0);
struct i2c_msg msg;
int ret;
camera_power(1);
msg.addr = 0x6e;
msg.buf = camera_ncm03j_magic;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
camera_power(0);
return ret;
}
static int camera_set_capture(struct soc_camera_platform_info *info,
int enable)
{
......@@ -245,9 +270,11 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
int ret = 0;
int i;
camera_power(0);
if (!enable)
return 0; /* no disable for now */
camera_power(1);
for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
u_int8_t buf[8];
......@@ -286,8 +313,35 @@ static struct platform_device camera_device = {
.platform_data = &camera_info,
},
};
static int __init camera_setup(void)
{
if (camera_probe() > 0)
platform_device_register(&camera_device);
return 0;
}
late_initcall(camera_setup);
#endif /* CONFIG_I2C */
static int ov7725_power(struct device *dev, int mode)
{
camera_power(0);
if (mode)
camera_power(1);
return 0;
}
static struct ov772x_camera_info ov7725_info = {
.buswidth = SOCAM_DATAWIDTH_8,
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
.link = {
.power = ov7725_power,
},
};
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
......@@ -338,9 +392,6 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
#ifdef CONFIG_I2C
&camera_device,
#endif
&nand_flash_device,
&sdcard_cn3_device,
};
......@@ -349,6 +400,10 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
{
I2C_BOARD_INFO("ov772x", 0x21),
.platform_data = &ov7725_info,
},
};
static struct spi_board_info ap325rxa_spi_devices[] = {
......@@ -426,7 +481,7 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_PTZ6, NULL);
gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
gpio_request(GPIO_PTZ5, NULL);
gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
gpio_request(GPIO_PTZ4, NULL);
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28
# Fri Jan 9 16:54:19 2009
# Linux kernel version: 2.6.29-rc2
# Tue Jan 27 11:45:08 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
......@@ -45,12 +45,12 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
......@@ -378,6 +378,7 @@ CONFIG_WIRELESS=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
......@@ -400,6 +401,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
......@@ -447,9 +449,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xffffffff
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
......@@ -479,6 +479,12 @@ CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_SH_FLCTL=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
......@@ -607,6 +613,10 @@ CONFIG_SMSC911X=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
......@@ -790,6 +800,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
......@@ -837,7 +848,7 @@ CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_SOC_CAMERA_PLATFORM=y
# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
......@@ -1012,6 +1023,7 @@ CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
......@@ -1060,6 +1072,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28
# Fri Jan 9 17:09:35 2009
# Linux kernel version: 2.6.29-rc1
# Thu Jan 22 09:16:16 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
......@@ -45,8 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
#
# Control Group support
#
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
......@@ -389,6 +393,7 @@ CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
......@@ -411,6 +416,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
......@@ -458,9 +464,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xffffffff
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
......@@ -487,6 +491,12 @@ CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
......@@ -587,6 +597,10 @@ CONFIG_SMC91X=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
......@@ -761,6 +775,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
......@@ -806,9 +821,9 @@ CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_SOC_CAMERA_PLATFORM=y
# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
......@@ -866,11 +881,13 @@ CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
......@@ -883,6 +900,11 @@ CONFIG_USB_G_SERIAL=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
......@@ -961,6 +983,7 @@ CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
......@@ -1004,6 +1027,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
......
......@@ -21,38 +21,36 @@
static inline void
__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
int __ex_flag, __res;
int __done, __res;
__asm__ __volatile__ (
"movli.l @%2, %0 \n"
"add #-1, %0 \n"
"movco.l %0, @%2 \n"
"movt %1 \n"
: "=&z" (__res), "=&r" (__ex_flag)
: "=&z" (__res), "=&r" (__done)
: "r" (&(count)->counter)
: "t");
__res |= !__ex_flag;
if (unlikely(__res != 0))
if (unlikely(!__done || __res != 0))
fail_fn(count);
}
static inline int
__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
{
int __ex_flag, __res;
int __done, __res;
__asm__ __volatile__ (
"movli.l @%2, %0 \n"
"add #-1, %0 \n"
"movco.l %0, @%2 \n"
"movt %1 \n"
: "=&z" (__res), "=&r" (__ex_flag)
: "=&z" (__res), "=&r" (__done)
: "r" (&(count)->counter)
: "t");
__res |= !__ex_flag;
if (unlikely(__res != 0))
if (unlikely(!__done || __res != 0))
__res = fail_fn(count);
return __res;
......@@ -61,19 +59,18 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
static inline void
__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
int __ex_flag, __res;
int __done, __res;
__asm__ __volatile__ (
"movli.l @%2, %0 \n\t"
"add #1, %0 \n\t"
"movco.l %0, @%2 \n\t"
"movt %1 \n\t"
: "=&z" (__res), "=&r" (__ex_flag)
: "=&z" (__res), "=&r" (__done)
: "r" (&(count)->counter)
: "t");
__res |= !__ex_flag;
if (unlikely(__res <= 0))
if (unlikely(!__done || __res <= 0))
fail_fn(count);
}
......
......@@ -21,23 +21,10 @@ static inline void syscall_rollback(struct task_struct *task,
*/
}
static inline bool syscall_has_error(struct pt_regs *regs)
{
return (regs->sr & 0x1) ? true : false;
}
static inline void syscall_set_error(struct pt_regs *regs)
{
regs->sr |= 0x1;
}
static inline void syscall_clear_error(struct pt_regs *regs)
{
regs->sr &= ~0x1;
}
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
return syscall_has_error(regs) ? regs->regs[0] : 0;
return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
}
static inline long syscall_get_return_value(struct task_struct *task,
......@@ -50,13 +37,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
struct pt_regs *regs,
int error, long val)
{
if (error) {
syscall_set_error(regs);
if (error)
regs->regs[0] = -error;
} else {
syscall_clear_error(regs);
else
regs->regs[0] = val;
}
}
static inline void syscall_get_arguments(struct task_struct *task,
......
......@@ -21,23 +21,10 @@ static inline void syscall_rollback(struct task_struct *task,
*/
}
static inline bool syscall_has_error(struct pt_regs *regs)
{
return (regs->sr & 0x1) ? true : false;
}
static inline void syscall_set_error(struct pt_regs *regs)
{
regs->sr |= 0x1;
}
static inline void syscall_clear_error(struct pt_regs *regs)
{
regs->sr &= ~0x1;
}
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
return syscall_has_error(regs) ? regs->regs[9] : 0;
return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
}
static inline long syscall_get_return_value(struct task_struct *task,
......@@ -50,13 +37,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
struct pt_regs *regs,
int error, long val)
{
if (error) {
syscall_set_error(regs);
if (error)
regs->regs[9] = -error;
} else {
syscall_clear_error(regs);
else
regs->regs[9] = val;
}
}
static inline void syscall_get_arguments(struct task_struct *task,
......
......@@ -423,7 +423,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
int m;
unsigned int hx;
m = (finsn >> 9) & 0x7;
m = (finsn >> 8) & 0x7;
hx = tsk->thread.fpu.hard.fp_regs[m];
if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)
......
......@@ -262,11 +262,11 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
BOOTMEM_DEFAULT);
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
* enabling clean reboots, SMP operation, laptop functions.
* Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
*/
reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
BOOTMEM_DEFAULT);
if (CONFIG_ZERO_PAGE_OFFSET != 0)
reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
BOOTMEM_DEFAULT);
sparse_memory_present_with_active_regions(0);
......
......@@ -510,7 +510,6 @@ handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
case -ERESTARTNOHAND:
no_system_call_restart:
regs->regs[0] = -EINTR;
regs->sr |= 1;
break;
case -ERESTARTSYS:
......@@ -589,8 +588,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
if (regs->sr & 1)
handle_syscall_restart(save_r0, regs, &ka.sa);
handle_syscall_restart(save_r0, regs, &ka.sa);
/* Whee! Actually deliver the signal. */
if (handle_signal(signr, &ka, &info, oldset,
......
......@@ -60,7 +60,6 @@ handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa)
case -ERESTARTNOHAND:
no_system_call_restart:
regs->regs[REG_RET] = -EINTR;
regs->sr |= 1;
break;
case -ERESTARTSYS:
......@@ -109,8 +108,7 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset)
signr = get_signal_to_deliver(&info, &ka, regs, 0);
if (signr > 0) {
if (regs->sr & 1)
handle_syscall_restart(regs, &ka.sa);
handle_syscall_restart(regs, &ka.sa);
/* Whee! Actually deliver the signal. */
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
......
......@@ -36,8 +36,7 @@
*/
/*
* unsigned int csum_partial(const unsigned char *buf, int len,
* unsigned int sum);
* asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
*/
.text
......@@ -49,11 +48,31 @@ ENTRY(csum_partial)
* Fortunately, it is easy to convert 2-byte alignment to 4-byte
* alignment for the unrolled loop.
*/
mov r5, r1
mov r4, r0
tst #2, r0 ! Check alignment.
bt 2f ! Jump if alignment is ok.
tst #3, r0 ! Check alignment.
bt/s 2f ! Jump if alignment is ok.
mov r4, r7 ! Keep a copy to check for alignment
!
tst #1, r0 ! Check alignment.
bt 21f ! Jump if alignment is boundary of 2bytes.
! buf is odd
tst r5, r5
add #-1, r5
bt 9f
mov.b @r4+, r0
extu.b r0, r0
addc r0, r6 ! t=0 from previous tst
mov r6, r0
shll8 r6
shlr16 r0
shlr8 r0
or r0, r6
mov r4, r0
tst #2, r0
bt 2f
21:
! buf is 2 byte aligned (len could be 0)
add #-2, r5 ! Alignment uses up two bytes.
cmp/pz r5 !
bt/s 1f ! Jump if we had at least two bytes.
......@@ -61,16 +80,17 @@ ENTRY(csum_partial)
bra 6f
add #2, r5 ! r5 was < 2. Deal with it.
1:
mov r5, r1 ! Save new len for later use.
mov.w @r4+, r0
extu.w r0, r0
addc r0, r6
bf 2f
add #1, r6
2:
! buf is 4 byte aligned (len could be 0)
mov r5, r1
mov #-5, r0
shld r0, r5
tst r5, r5
shld r0, r1
tst r1, r1
bt/s 4f ! if it's =0, go to 4f
clrt
.align 2
......@@ -92,30 +112,31 @@ ENTRY(csum_partial)
addc r0, r6
addc r2, r6
movt r0
dt r5
dt r1
bf/s 3b
cmp/eq #1, r0
! here, we know r5==0
addc r5, r6 ! add carry to r6
! here, we know r1==0
addc r1, r6 ! add carry to r6
4:
mov r1, r0
mov r5, r0
and #0x1c, r0
tst r0, r0
bt/s 6f
mov r0, r5
shlr2 r5
bt 6f
! 4 bytes or more remaining
mov r0, r1
shlr2 r1
mov #0, r2
5:
addc r2, r6
mov.l @r4+, r2
movt r0
dt r5
dt r1
bf/s 5b
cmp/eq #1, r0
addc r2, r6
addc r5, r6 ! r5==0 here, so it means add carry-bit
addc r1, r6 ! r1==0 here, so it means add carry-bit
6:
mov r1, r5
! 3 bytes or less remaining
mov #3, r0
and r0, r5
tst r5, r5
......@@ -139,8 +160,18 @@ ENTRY(csum_partial)
8:
addc r0, r6
mov #0, r0
addc r0, r6
addc r0, r6
9:
! Check if the buffer was misaligned, if so realign sum
mov r7, r0
tst #1, r0
bt 10f
mov r6, r0
shll8 r6
shlr16 r0
shlr8 r0
or r0, r6
10:
rts
mov r6, r0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册