提交 0973dd45 编写于 作者: J Johannes Berg

Revert "mac80211: Add airtime account and scheduling to TXQs"

This reverts commit b0d52ad8.

We need to revert the TXQ scheduling API due to conflicts
with a new driver, and this depends on that API.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
上级 b0d52ad8
......@@ -1188,8 +1188,6 @@ enum mac80211_rx_encoding {
* HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
* @nss: number of streams (VHT and HE only)
* @flag: %RX_FLAG_\*
* @airtime: Duration of frame in usec. See @IEEE80211_HW_AIRTIME_ACCOUNTING for
* how to use this.
* @encoding: &enum mac80211_rx_encoding
* @bw: &enum rate_info_bw
* @enc_flags: uses bits from &enum mac80211_rx_encoding_flags
......@@ -1204,7 +1202,6 @@ struct ieee80211_rx_status {
u32 device_timestamp;
u32 ampdu_reference;
u32 flag;
u16 airtime;
u16 freq;
u8 enc_flags;
u8 encoding:2, bw:3;
......@@ -2069,26 +2066,6 @@ struct ieee80211_txq {
* @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware supports buffer STA on
* TDLS links.
*
* @IEEE80211_HW_AIRTIME_ACCOUNTING: Hardware supports accounting the airtime
* usage of other stations and reports it in the @tx_time and/or @airtime
* fields of the TX/RX status structs.
* When setting this flag, the driver should ensure that the respective
* fields in the TX and RX status structs are always either zero or
* contains a valid duration for the frame in usec. The driver can choose
* to report either or both of TX and RX airtime, but it is recommended to
* report both.
* The reported airtime should as a minimum include all time that is spent
* transmitting to the remote station, including overhead and padding, but
* not including time spent waiting for a TXOP. If the time is not reported
* by the hardware it can in some cases be calculated from the rate and
* known frame composition. When possible, the time should include any
* failed transmission attempts.
* For aggregated frames, there are two possible strategies to report the
* airtime: Either include the airtime of the entire aggregate in the first
* (or last) frame and leave the others at zero. Alternatively, include the
* overhead of the full aggregate in the first or last frame and report the
* time of each frame + padding not including the full aggregate overhead.
*
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
......@@ -2132,7 +2109,6 @@ enum ieee80211_hw_flags {
IEEE80211_HW_REPORTS_LOW_ACK,
IEEE80211_HW_SUPPORTS_TX_FRAG,
IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
IEEE80211_HW_AIRTIME_ACCOUNTING,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
......
......@@ -212,7 +212,6 @@ static const char *hw_flag_names[] = {
FLAG(REPORTS_LOW_ACK),
FLAG(SUPPORTS_TX_FRAG),
FLAG(SUPPORTS_TDLS_BUFFER_STA),
FLAG(AIRTIME_ACCOUNTING),
#undef FLAG
};
......
......@@ -188,32 +188,6 @@ static ssize_t sta_aqm_read(struct file *file, char __user *userbuf,
}
STA_OPS(aqm);
static ssize_t sta_airtime_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct sta_info *sta = file->private_data;
size_t bufsz = 200;
char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf;
ssize_t rv;
if (!buf)
return -ENOMEM;
spin_lock_bh(&sta->lock);
p += scnprintf(p, bufsz + buf - p,
"RX: %llu us\nTX: %llu us\nDeficit: %lld us\n",
sta->airtime_stats.rx_airtime,
sta->airtime_stats.tx_airtime,
sta->airtime_deficit);
spin_unlock_bh(&sta->lock);
rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
kfree(buf);
return rv;
}
STA_OPS(airtime);
static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
......@@ -568,9 +542,6 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
if (local->ops->wake_tx_queue)
DEBUGFS_ADD(aqm);
if (ieee80211_hw_check(&local->hw, AIRTIME_ACCOUNTING))
DEBUGFS_ADD(airtime);
if (sizeof(sta->driver_buffered_tids) == sizeof(u32))
debugfs_create_x32("driver_buffered_tids", 0400,
sta->debugfs_dir,
......
......@@ -90,9 +90,6 @@ extern const u8 ieee80211_ac_to_qos_mask[IEEE80211_NUM_ACS];
#define IEEE80211_MAX_NAN_INSTANCE_ID 255
/* How much to increase airtime deficit on each scheduling round */
#define IEEE80211_AIRTIME_QUANTUM 1000 /* usec */
struct ieee80211_fragment_entry {
struct sk_buff_head skb_list;
unsigned long first_frag_time;
......@@ -1126,10 +1123,9 @@ struct ieee80211_local {
struct codel_vars *cvars;
struct codel_params cparams;
/* protects active_txqs_{new,old} and txqi->schedule_order */
/* protects active_txqs and txqi->schedule_order */
spinlock_t active_txq_lock;
struct list_head active_txqs_new;
struct list_head active_txqs_old;
struct list_head active_txqs;
const struct ieee80211_ops *ops;
......
......@@ -619,8 +619,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
spin_lock_init(&local->rx_path_lock);
spin_lock_init(&local->queue_stop_reason_lock);
INIT_LIST_HEAD(&local->active_txqs_new);
INIT_LIST_HEAD(&local->active_txqs_old);
INIT_LIST_HEAD(&local->active_txqs);
spin_lock_init(&local->active_txq_lock);
INIT_LIST_HEAD(&local->chanctx_list);
......
......@@ -1630,14 +1630,6 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
if (ieee80211_vif_is_mesh(&rx->sdata->vif))
ieee80211_mps_rx_h_sta_process(sta, hdr);
/* airtime accounting */
if (status->airtime) {
spin_lock_bh(&sta->lock);
sta->airtime_stats.rx_airtime += status->airtime;
sta->airtime_deficit -= status->airtime;
spin_unlock_bh(&sta->lock);
}
/*
* Drop (qos-)data::nullfunc frames silently, since they
* are used only to control station power saving mode.
......
......@@ -425,8 +425,6 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
sta->cparams.interval = MS2TIME(100);
sta->cparams.ecn = true;
sta->airtime_deficit = IEEE80211_AIRTIME_QUANTUM;
sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
return sta;
......
......@@ -559,13 +559,6 @@ struct sta_info {
} tx_stats;
u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
/* Airtime stats and deficit, protected by lock */
struct {
u64 rx_airtime;
u64 tx_airtime;
} airtime_stats;
s64 airtime_deficit;
/*
* Aggregation information, locked with lock.
*/
......
......@@ -823,14 +823,6 @@ static void __ieee80211_tx_status(struct ieee80211_hw *hw,
ieee80211_lost_packet(sta, info);
}
}
if (info->status.tx_time &&
ieee80211_hw_check(&local->hw, AIRTIME_ACCOUNTING)) {
spin_lock_bh(&sta->lock);
sta->airtime_stats.tx_airtime += info->status.tx_time;
sta->airtime_deficit -= info->status.tx_time;
spin_unlock_bh(&sta->lock);
}
}
/* SNMP counters
......@@ -955,14 +947,6 @@ void ieee80211_tx_status_ext(struct ieee80211_hw *hw,
sta->status_stats.retry_failed++;
sta->status_stats.retry_count += retry_count;
if (info->status.tx_time &&
ieee80211_hw_check(&local->hw, AIRTIME_ACCOUNTING)) {
spin_lock_bh(&sta->lock);
sta->airtime_stats.tx_airtime += info->status.tx_time;
sta->airtime_deficit -= info->status.tx_time;
spin_unlock_bh(&sta->lock);
}
if (acked) {
sta->status_stats.last_ack = jiffies;
......
......@@ -3566,7 +3566,7 @@ bool ieee80211_schedule_txq(struct ieee80211_hw *hw,
spin_lock_bh(&local->active_txq_lock);
if (list_empty(&txqi->schedule_order)) {
list_add_tail(&txqi->schedule_order, &local->active_txqs_new);
list_add_tail(&txqi->schedule_order, &local->active_txqs);
ret = true;
}
......@@ -3580,35 +3580,14 @@ struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
struct txq_info *txqi = NULL;
struct list_head *head;
spin_lock_bh(&local->active_txq_lock);
begin:
head = &local->active_txqs_new;
if (list_empty(head)) {
head = &local->active_txqs_old;
if (list_empty(head))
goto out;
}
txqi = list_first_entry(head, struct txq_info, schedule_order);
if (txqi->txq.sta) {
struct sta_info *sta = container_of(txqi->txq.sta,
struct sta_info, sta);
spin_lock_bh(&sta->lock);
if (sta->airtime_deficit < 0) {
sta->airtime_deficit += IEEE80211_AIRTIME_QUANTUM;
list_move_tail(&txqi->schedule_order,
&local->active_txqs_old);
spin_unlock_bh(&sta->lock);
goto begin;
}
spin_unlock_bh(&sta->lock);
}
if (list_empty(&local->active_txqs))
goto out;
txqi = list_first_entry(&local->active_txqs,
struct txq_info, schedule_order);
list_del_init(&txqi->schedule_order);
out:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册