提交 096dcfce 编写于 作者: J Jiri Slaby 提交者: Linus Torvalds

[PATCH] Char: cyclades, cleanup

- remove cvs rcsid and alter code that uses it.
- allow a semicolon after use of macro to not confuse parsers (e.g. indent)
  by do {} while (0)
- JIFFIES_DIFF is simple subtraction, subtract directly
- returns cleanup -- do not put values in parenthesis and do not return nothing
  at the end of void functions
- comments are /* */ in C (not //)
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 02f1175c
#undef BLOCKMOVE
#define Z_WAKE
#undef Z_EXT_CHARS_IN_BUFFER
static char rcsid[] = "$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
/*
* linux/drivers/char/cyclades.c
......@@ -592,6 +591,8 @@ static char rcsid[] = "$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
*
*/
#define CY_VERSION "2.4"
/* If you need to install more boards than NR_CARDS, change the constant
in the definition below. No other change is necessary to support up to
eight boards. Beyond that you'll have to extend cy_isa_addresses. */
......@@ -624,9 +625,9 @@ static char rcsid[] = "$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
#undef CY_PCI_DEBUG
#if 0
#define PAUSE __asm__("nop");
#define PAUSE __asm__("nop")
#else
#define PAUSE ;
#define PAUSE do {} while (0)
#endif
/*
......@@ -697,8 +698,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch);
#define STD_COM_FLAGS (0)
#define JIFFIES_DIFF(n, j) ((j) - (n))
static struct tty_driver *cy_serial_driver;
#ifdef CONFIG_ISA
......@@ -870,26 +869,22 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
char *name, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
static const char *badmagic =
"cyc Warning: bad magic number for serial struct (%s) in %s\n";
static const char *badinfo =
"cyc Warning: null cyclades_port for (%s) in %s\n";
static const char *badrange =
"cyc Warning: cyclades_port out of range for (%s) in %s\n";
if (!info) {
printk(badinfo, name, routine);
printk("cyc Warning: null cyclades_port for (%s) in %s\n",
name, routine);
return 1;
}
if ((long)info < (long)(&cy_port[0]) ||
(long)(&cy_port[NR_PORTS]) < (long)info) {
printk(badrange, name, routine);
printk("cyc Warning: cyclades_port out of range for (%s) in "
"%s\n", name, routine);
return 1;
}
if (info->magic != CYCLADES_MAGIC) {
printk(badmagic, name, routine);
printk("cyc Warning: bad magic number for serial struct (%s) "
"in %s\n", name, routine);
return 1;
}
#endif
......@@ -991,12 +986,12 @@ static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index)
/* if the CCR never cleared, the previous command
didn't finish within the "reasonable time" */
if (i == 100)
return (-1);
return -1;
/* Issue the new command */
cy_writeb(base_addr + (CyCCR << index), cmd);
return (0);
return 0;
} /* cyy_issue_cmd */
#ifdef CONFIG_ISA
......@@ -1511,7 +1506,7 @@ cyz_fetch_msg(struct cyclades_card *cinfo,
firm_id = cinfo->base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
return (-1);
return -1;
}
zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
0xfffff);
......@@ -1542,7 +1537,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
firm_id = cinfo->base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
return (-1);
return -1;
}
zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
0xfffff);
......@@ -1553,7 +1548,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
while ((cy_readl(pci_doorbell) & 0xff) != 0) {
if (index++ == 1000) {
return ((int)(cy_readl(pci_doorbell) & 0xff));
return (int)(cy_readl(pci_doorbell) & 0xff);
}
udelay(50L);
}
......@@ -1561,7 +1556,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
cy_writel(&board_ctrl->hcmd_param, param);
cy_writel(pci_doorbell, (long)cmd);
return (0);
return 0;
} /* cyz_issue_cmd */
static void
......@@ -1959,8 +1954,6 @@ static void cyz_poll(unsigned long arg)
cyz_timerlist.expires = jiffies + cyz_polling_cycle;
}
add_timer(&cyz_timerlist);
return;
} /* cyz_poll */
#endif /* CONFIG_CYZ_INTR */
......@@ -2318,7 +2311,6 @@ static void shutdown(struct cyclades_port *info)
#ifdef CY_DEBUG_OPEN
printk(" cyc shutdown done\n");
#endif
return;
} /* shutdown */
/*
......@@ -2349,8 +2341,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
if (info->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&info->close_wait);
}
return ((info->
flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
/*
......@@ -2629,8 +2620,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
return ((info->
flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
/*
......@@ -2727,7 +2717,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
} else {
// Nothing to do!
/* Nothing to do! */
}
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
......@@ -2869,7 +2859,6 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
#endif
CY_UNLOCK(info, flags);
return;
} /* cy_close */
/* This routine gets called when tty_write has put something into
......@@ -3053,7 +3042,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
#ifdef CY_DEBUG_IO
printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); /* */
#endif
return (info->xmit_cnt + char_count);
return info->xmit_cnt + char_count;
}
#endif /* Z_EXT_CHARS_IN_BUFFER */
} /* cy_chars_in_buffer */
......@@ -3918,7 +3907,7 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
CY_UNLOCK(info, flags);
} else {
// Nothing to do!
/* Nothing to do! */
}
return 0;
} /* set_threshold */
......@@ -3942,7 +3931,7 @@ get_threshold(struct cyclades_port *info, unsigned long __user * value)
tmp = cy_readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
return put_user(tmp, value);
} else {
// Nothing to do!
/* Nothing to do! */
return 0;
}
} /* get_threshold */
......@@ -3979,7 +3968,7 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
CY_UNLOCK(info, flags);
} else {
// Nothing to do!
/* Nothing to do! */
}
return 0;
} /* set_timeout */
......@@ -4002,7 +3991,7 @@ static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
tmp = cy_readb(base_addr + (CyRTPR << index));
return put_user(tmp, value);
} else {
// Nothing to do!
/* Nothing to do! */
return 0;
}
} /* get_timeout */
......@@ -4249,8 +4238,6 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
(tty->termios->c_cflag & CLOCAL))
wake_up_interruptible(&info->open_wait);
#endif
return;
} /* cy_set_termios */
/* This function is used to send a high-priority XON/XOFF character to
......@@ -4337,8 +4324,6 @@ static void cy_throttle(struct tty_struct *tty)
info->throttle = 1;
}
}
return;
} /* cy_throttle */
/*
......@@ -4396,8 +4381,6 @@ static void cy_unthrottle(struct tty_struct *tty)
info->throttle = 0;
}
}
return;
} /* cy_unthrottle */
/* cy_start and cy_stop provide software output flow control as a
......@@ -4434,10 +4417,8 @@ static void cy_stop(struct tty_struct *tty)
cy_readb(base_addr + (CySRER << index)) & ~CyTxRdy);
CY_UNLOCK(info, flags);
} else {
// Nothing to do!
/* Nothing to do! */
}
return;
} /* cy_stop */
static void cy_start(struct tty_struct *tty)
......@@ -4470,10 +4451,8 @@ static void cy_start(struct tty_struct *tty)
cy_readb(base_addr + (CySRER << index)) | CyTxRdy);
CY_UNLOCK(info, flags);
} else {
// Nothing to do!
/* Nothing to do! */
}
return;
} /* cy_start */
static void cy_flush_buffer(struct tty_struct *tty)
......@@ -4661,7 +4640,7 @@ static int __init cy_detect_isa(void)
for (i = 0; i < NR_ISA_ADDRS; i++) {
unsigned int isa_address = cy_isa_addresses[i];
if (isa_address == 0x0000) {
return (nboard);
return nboard;
}
/* probe for CD1400... */
......@@ -4691,7 +4670,7 @@ static int __init cy_detect_isa(void)
printk("but no more channels are available.\n");
printk("Change NR_PORTS in cyclades.c and recompile "
"kernel.\n");
return (nboard);
return nboard;
}
/* fill the next cy_card structure available */
for (j = 0; j < NR_CARDS; j++) {
......@@ -4704,7 +4683,7 @@ static int __init cy_detect_isa(void)
printk("but no more cards can be used .\n");
printk("Change NR_CARDS in cyclades.c and recompile "
"kernel.\n");
return (nboard);
return nboard;
}
/* allocate IRQ */
......@@ -4713,7 +4692,7 @@ static int __init cy_detect_isa(void)
printk("Cyclom-Y/ISA found at 0x%lx ",
(unsigned long)cy_isa_address);
printk("but could not allocate IRQ#%d.\n", cy_isa_irq);
return (nboard);
return nboard;
}
/* set cy_card */
......@@ -4734,9 +4713,9 @@ static int __init cy_detect_isa(void)
cy_isa_nchan, cy_next_channel);
cy_next_channel += cy_isa_nchan;
}
return (nboard);
return nboard;
#else
return (0);
return 0;
#endif /* CONFIG_ISA */
} /* cy_detect_isa */
......@@ -4867,7 +4846,7 @@ static int __init cy_detect_pci(void)
printk("but no channels are available.\n");
printk("Change NR_PORTS in cyclades.c and "
"recompile kernel.\n");
return (i);
return i;
}
/* fill the next cy_card structure available */
for (j = 0; j < NR_CARDS; j++) {
......@@ -4880,7 +4859,7 @@ static int __init cy_detect_pci(void)
printk("but no more cards can be used.\n");
printk("Change NR_CARDS in cyclades.c and "
"recompile kernel.\n");
return (i);
return i;
}
/* allocate IRQ */
......@@ -4890,7 +4869,7 @@ static int __init cy_detect_pci(void)
(ulong) cy_pci_phys2);
printk("but could not allocate IRQ%d.\n",
cy_pci_irq);
return (i);
return i;
}
/* set cy_card */
......@@ -5029,7 +5008,7 @@ static int __init cy_detect_pci(void)
cy_writel(&((struct RUNTIME_9060 *)
(cy_pci_addr0))->loc_addr_base,
WIN_CREG);
PAUSE
PAUSE;
printk("Cyclades-8Zo/PCI: FPGA id %lx, ver "
"%lx\n", (ulong) (0xff &
cy_readl(&((struct CUSTOM_REG *)
......@@ -5050,7 +5029,7 @@ static int __init cy_detect_pci(void)
ensures that the driver will not attempt to talk to
the board until it has been properly initialized.
*/
PAUSE
PAUSE;
if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L);
......@@ -5064,7 +5043,7 @@ static int __init cy_detect_pci(void)
"no channels are available.\nChange "
"NR_PORTS in cyclades.c and recompile "
"kernel.\n", (ulong)cy_pci_phys2);
return (i);
return i;
}
/* fill the next cy_card structure available */
......@@ -5077,7 +5056,7 @@ static int __init cy_detect_pci(void)
"no more cards can be used.\nChange "
"NR_CARDS in cyclades.c and recompile "
"kernel.\n", (ulong)cy_pci_phys2);
return (i);
return i;
}
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
......@@ -5089,7 +5068,7 @@ static int __init cy_detect_pci(void)
"but could not allocate "
"IRQ%d.\n", (ulong)cy_pci_phys2,
cy_pci_irq);
return (i);
return i;
}
}
#endif /* CONFIG_CYZ_INTR */
......@@ -5149,7 +5128,7 @@ static int __init cy_detect_pci(void)
printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not "
"loaded\n");
#endif
PAUSE
PAUSE;
/* This must be the new Cyclades-Ze/PCI. */
cy_pci_nchan = ZE_V1_NPORTS;
......@@ -5158,7 +5137,7 @@ static int __init cy_detect_pci(void)
"are available.\nChange NR_PORTS in cyclades.c "
"and recompile kernel.\n",
(ulong) cy_pci_phys2);
return (i);
return i;
}
/* fill the next cy_card structure available */
......@@ -5171,7 +5150,7 @@ static int __init cy_detect_pci(void)
"cards can be used.\nChange NR_CARDS in "
"cyclades.c and recompile kernel.\n",
(ulong) cy_pci_phys2);
return (i);
return i;
}
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
......@@ -5183,7 +5162,7 @@ static int __init cy_detect_pci(void)
(ulong) cy_pci_phys2);
printk("but could not allocate IRQ%d.\n",
cy_pci_irq);
return (i);
return i;
}
}
#endif /* CONFIG_CYZ_INTR */
......@@ -5222,9 +5201,9 @@ static int __init cy_detect_pci(void)
"used.\nChange NR_CARDS in cyclades.c and recompile "
"kernel.\n", (unsigned int)Ze_phys2[0]);
}
return (i);
return i;
#else
return (0);
return 0;
#endif /* ifdef CONFIG_PCI */
} /* cy_detect_pci */
......@@ -5234,16 +5213,7 @@ static int __init cy_detect_pci(void)
*/
static inline void show_version(void)
{
char *rcsvers, *rcsdate, *tmp;
rcsvers = strchr(rcsid, ' ');
rcsvers++;
tmp = strchr(rcsvers, ' ');
*tmp++ = '\0';
rcsdate = strchr(tmp, ' ');
rcsdate++;
tmp = strrchr(rcsdate, ' ');
*tmp = '\0';
printk("Cyclades driver %s %s\n", rcsvers, rcsdate);
printk("Cyclades driver " CY_VERSION "\n");
printk(" built %s %s\n", __DATE__, __TIME__);
} /* show_version */
......@@ -5272,14 +5242,11 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
if (info->count)
size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu "
"%8lu %9lu %6ld\n", info->line,
JIFFIES_DIFF(info->idle_stats.in_use,
cur_jifs) / HZ,
(cur_jifs - info->idle_stats.in_use) / HZ,
info->idle_stats.xmit_bytes,
JIFFIES_DIFF(info->idle_stats.xmit_idle,
cur_jifs) / HZ,
(cur_jifs - info->idle_stats.xmit_idle) / HZ,
info->idle_stats.recv_bytes,
JIFFIES_DIFF(info->idle_stats.recv_idle,
cur_jifs) / HZ,
(cur_jifs - info->idle_stats.recv_idle) / HZ,
info->idle_stats.overruns,
(long)info->tty->ldisc.num);
else
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册