提交 09345f65 编写于 作者: F FUJITA Tomonori 提交者: James Bottomley

[SCSI] add srp transport class

This adds srp transport class that works with ib_srp and ibmvscsi.

It creates only /sys/class/{srp_host,srp_remote_ports} and
srp_remote_ports has only "port_id" attribute.

viola:/sys/class/srp_remote_ports/port-0:1# ls
device  port_id  subsystem  uevent
viola:/sys/class/srp_remote_ports/port-0:1# cat port_id
4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 604cd794
......@@ -289,6 +289,13 @@ config SCSI_SAS_ATTRS
source "drivers/scsi/libsas/Kconfig"
config SCSI_SRP_ATTRS
tristate "SRP Transport Attributes"
depends on SCSI
help
If you wish to export transport-specific information about
each attached SRP device to sysfs, say Y.
endmenu
menuconfig SCSI_LOWLEVEL
......
......@@ -34,6 +34,7 @@ obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
......
/*
* SCSI RDMA (SRP) transport class
*
* Copyright (C) 2007 FUJITA Tomonori <tomof@acm.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_srp.h>
struct srp_host_attrs {
atomic_t next_port_id;
};
#define to_srp_host_attrs(host) ((struct srp_host_attrs *)(host)->shost_data)
#define SRP_HOST_ATTRS 0
#define SRP_RPORT_ATTRS 3
struct srp_internal {
struct scsi_transport_template t;
struct srp_function_template *f;
struct class_device_attribute *host_attrs[SRP_HOST_ATTRS + 1];
struct class_device_attribute *rport_attrs[SRP_RPORT_ATTRS + 1];
struct class_device_attribute private_rport_attrs[SRP_RPORT_ATTRS];
struct transport_container rport_attr_cont;
};
#define to_srp_internal(tmpl) container_of(tmpl, struct srp_internal, t)
#define dev_to_rport(d) container_of(d, struct srp_rport, dev)
#define transport_class_to_srp_rport(cdev) dev_to_rport((cdev)->dev)
static int srp_host_setup(struct transport_container *tc, struct device *dev,
struct class_device *cdev)
{
struct Scsi_Host *shost = dev_to_shost(dev);
struct srp_host_attrs *srp_host = to_srp_host_attrs(shost);
atomic_set(&srp_host->next_port_id, 0);
return 0;
}
static DECLARE_TRANSPORT_CLASS(srp_host_class, "srp_host", srp_host_setup,
NULL, NULL);
static DECLARE_TRANSPORT_CLASS(srp_rport_class, "srp_remote_ports",
NULL, NULL, NULL);
#define SETUP_TEMPLATE(attrb, field, perm, test, ro_test, ro_perm) \
i->private_##attrb[count] = class_device_attr_##field; \
i->private_##attrb[count].attr.mode = perm; \
if (ro_test) { \
i->private_##attrb[count].attr.mode = ro_perm; \
i->private_##attrb[count].store = NULL; \
} \
i->attrb[count] = &i->private_##attrb[count]; \
if (test) \
count++
#define SETUP_RPORT_ATTRIBUTE_RD(field) \
SETUP_TEMPLATE(rport_attrs, field, S_IRUGO, 1, 0, 0)
#define SETUP_RPORT_ATTRIBUTE_RW(field) \
SETUP_TEMPLATE(rport_attrs, field, S_IRUGO | S_IWUSR, \
1, 1, S_IRUGO)
#define SRP_PID(p) \
(p)->port_id[0], (p)->port_id[1], (p)->port_id[2], (p)->port_id[3], \
(p)->port_id[4], (p)->port_id[5], (p)->port_id[6], (p)->port_id[7], \
(p)->port_id[8], (p)->port_id[9], (p)->port_id[10], (p)->port_id[11], \
(p)->port_id[12], (p)->port_id[13], (p)->port_id[14], (p)->port_id[15]
#define SRP_PID_FMT "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:" \
"%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x"
static ssize_t
show_srp_rport_id(struct class_device *cdev, char *buf)
{
struct srp_rport *rport = transport_class_to_srp_rport(cdev);
return sprintf(buf, SRP_PID_FMT "\n", SRP_PID(rport));
}
static CLASS_DEVICE_ATTR(port_id, S_IRUGO, show_srp_rport_id, NULL);
static void srp_rport_release(struct device *dev)
{
struct srp_rport *rport = dev_to_rport(dev);
put_device(dev->parent);
kfree(rport);
}
static int scsi_is_srp_rport(const struct device *dev)
{
return dev->release == srp_rport_release;
}
static int srp_rport_match(struct attribute_container *cont,
struct device *dev)
{
struct Scsi_Host *shost;
struct srp_internal *i;
if (!scsi_is_srp_rport(dev))
return 0;
shost = dev_to_shost(dev->parent);
if (!shost->transportt)
return 0;
if (shost->transportt->host_attrs.ac.class != &srp_host_class.class)
return 0;
i = to_srp_internal(shost->transportt);
return &i->rport_attr_cont.ac == cont;
}
static int srp_host_match(struct attribute_container *cont, struct device *dev)
{
struct Scsi_Host *shost;
struct srp_internal *i;
if (!scsi_is_host_device(dev))
return 0;
shost = dev_to_shost(dev);
if (!shost->transportt)
return 0;
if (shost->transportt->host_attrs.ac.class != &srp_host_class.class)
return 0;
i = to_srp_internal(shost->transportt);
return &i->t.host_attrs.ac == cont;
}
/**
* srp_rport_add - add a SRP remote port to the device hierarchy
*
* @shost: scsi host the remote port is connected to.
* @ids: The port id for the remote port.
*
* publishes a port to the rest of the system
*/
struct srp_rport *srp_rport_add(struct Scsi_Host *shost,
struct srp_rport_identifiers *ids)
{
struct srp_rport *rport;
struct device *parent = &shost->shost_gendev;
int id, ret;
rport = kzalloc(sizeof(*rport), GFP_KERNEL);
if (!rport)
return ERR_PTR(-ENOMEM);
device_initialize(&rport->dev);
rport->dev.parent = get_device(parent);
rport->dev.release = srp_rport_release;
memcpy(rport->port_id, ids->port_id, sizeof(rport->port_id));
id = atomic_inc_return(&to_srp_host_attrs(shost)->next_port_id);
sprintf(rport->dev.bus_id, "port-%d:%d", shost->host_no, id);
transport_setup_device(&rport->dev);
ret = device_add(&rport->dev);
if (ret) {
transport_destroy_device(&rport->dev);
put_device(&rport->dev);
return ERR_PTR(ret);
}
transport_add_device(&rport->dev);
transport_configure_device(&rport->dev);
return rport;
}
EXPORT_SYMBOL_GPL(srp_rport_add);
/**
* srp_rport_del -- remove a SRP remote port
* @port: SRP remote port to remove
*
* Removes the specified SRP remote port.
*/
void srp_rport_del(struct srp_rport *rport)
{
struct device *dev = &rport->dev;
transport_remove_device(dev);
device_del(dev);
transport_destroy_device(dev);
put_device(dev);
}
EXPORT_SYMBOL_GPL(srp_rport_del);
static int do_srp_rport_del(struct device *dev, void *data)
{
srp_rport_del(dev_to_rport(dev));
return 0;
}
/**
* srp_remove_host -- tear down a Scsi_Host's SRP data structures
* @shost: Scsi Host that is torn down
*
* Removes all SRP remote ports for a given Scsi_Host.
* Must be called just before scsi_remove_host for SRP HBAs.
*/
void srp_remove_host(struct Scsi_Host *shost)
{
device_for_each_child(&shost->shost_gendev, NULL, do_srp_rport_del);
}
EXPORT_SYMBOL_GPL(srp_remove_host);
/**
* srp_attach_transport -- instantiate SRP transport template
* @ft: SRP transport class function template
*/
struct scsi_transport_template *
srp_attach_transport(struct srp_function_template *ft)
{
int count;
struct srp_internal *i;
i = kzalloc(sizeof(*i), GFP_KERNEL);
if (!i)
return NULL;
i->t.host_size = sizeof(struct srp_host_attrs);
i->t.host_attrs.ac.attrs = &i->host_attrs[0];
i->t.host_attrs.ac.class = &srp_host_class.class;
i->t.host_attrs.ac.match = srp_host_match;
i->host_attrs[0] = NULL;
transport_container_register(&i->t.host_attrs);
i->rport_attr_cont.ac.attrs = &i->rport_attrs[0];
i->rport_attr_cont.ac.class = &srp_rport_class.class;
i->rport_attr_cont.ac.match = srp_rport_match;
transport_container_register(&i->rport_attr_cont);
count = 0;
SETUP_RPORT_ATTRIBUTE_RD(port_id);
i->rport_attrs[count] = NULL;
i->f = ft;
return &i->t;
}
EXPORT_SYMBOL_GPL(srp_attach_transport);
/**
* srp_release_transport -- release SRP transport template instance
* @t: transport template instance
*/
void srp_release_transport(struct scsi_transport_template *t)
{
struct srp_internal *i = to_srp_internal(t);
transport_container_unregister(&i->t.host_attrs);
transport_container_unregister(&i->rport_attr_cont);
kfree(i);
}
EXPORT_SYMBOL_GPL(srp_release_transport);
static __init int srp_transport_init(void)
{
int ret;
ret = transport_class_register(&srp_host_class);
if (ret)
return ret;
ret = transport_class_register(&srp_rport_class);
if (ret)
goto unregister_host_class;
return 0;
unregister_host_class:
transport_class_unregister(&srp_host_class);
return ret;
}
static void __exit srp_transport_exit(void)
{
transport_class_unregister(&srp_host_class);
transport_class_unregister(&srp_rport_class);
}
MODULE_AUTHOR("FUJITA Tomonori");
MODULE_DESCRIPTION("SRP Transport Attributes");
MODULE_LICENSE("GPL");
module_init(srp_transport_init);
module_exit(srp_transport_exit);
#ifndef SCSI_TRANSPORT_SRP_H
#define SCSI_TRANSPORT_SRP_H
#include <linux/transport_class.h>
#include <linux/types.h>
#include <linux/mutex.h>
struct srp_rport_identifiers {
u8 port_id[16];
};
struct srp_rport {
struct device dev;
u8 port_id[16];
};
struct srp_function_template {
/* later */
};
extern struct scsi_transport_template *
srp_attach_transport(struct srp_function_template *);
extern void srp_release_transport(struct scsi_transport_template *);
extern struct srp_rport *srp_rport_add(struct Scsi_Host *,
struct srp_rport_identifiers *);
extern void srp_rport_del(struct srp_rport *);
extern void srp_remove_host(struct Scsi_Host *);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册