net-next: mediatek: fix gigabit and flow control advertisement

The current code will not setup the PHYs advertisement features correctly.
Fix this and properly advertise Gigabit features and properly handle
asymmetric pause frames.
Signed-off-by: NSean Wang <keyhaede@gmail.com>
Signed-off-by: NJohn Crispin <john@phrozen.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -133,6 +133,8 @@ static int mtk_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
 static void mtk_phy_link_adjust(struct net_device *dev)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
+	u16 lcl_adv = 0, rmt_adv = 0;
+	u8 flowctrl;
 	u32 mcr = MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG |
 		  MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN |
 		  MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN |
@@ -150,11 +152,30 @@ static void mtk_phy_link_adjust(struct net_device *dev)
 	if (mac->phy_dev->link)
 		mcr |= MAC_MCR_FORCE_LINK;
 
-	if (mac->phy_dev->duplex)
+	if (mac->phy_dev->duplex) {
 		mcr |= MAC_MCR_FORCE_DPX;
 
-	if (mac->phy_dev->pause)
-		mcr |= MAC_MCR_FORCE_RX_FC | MAC_MCR_FORCE_TX_FC;
+		if (mac->phy_dev->pause)
+			rmt_adv = LPA_PAUSE_CAP;
+		if (mac->phy_dev->asym_pause)
+			rmt_adv |= LPA_PAUSE_ASYM;
+
+		if (mac->phy_dev->advertising & ADVERTISED_Pause)
+			lcl_adv |= ADVERTISE_PAUSE_CAP;
+		if (mac->phy_dev->advertising & ADVERTISED_Asym_Pause)
+			lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+		flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+
+		if (flowctrl & FLOW_CTRL_TX)
+			mcr |= MAC_MCR_FORCE_TX_FC;
+		if (flowctrl & FLOW_CTRL_RX)
+			mcr |= MAC_MCR_FORCE_RX_FC;
+
+		netif_dbg(mac->hw, link, dev, "rx pause %s, tx pause %s\n",
+			  flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled",
+			  flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled");
+	}
 
 	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
 
@@ -236,7 +257,8 @@ static int mtk_phy_connect(struct mtk_mac *mac)
 	mac->phy_dev->autoneg = AUTONEG_ENABLE;
 	mac->phy_dev->speed = 0;
 	mac->phy_dev->duplex = 0;
-	mac->phy_dev->supported &= PHY_BASIC_FEATURES;
+	mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause;
 	mac->phy_dev->advertising = mac->phy_dev->supported |
 				    ADVERTISED_Autoneg;
 	phy_start_aneg(mac->phy_dev);