提交 08eb9a8c 编写于 作者: T Tony Lindgren

Merge tag 'ib-mfd-omap-3.16' of...

Merge tag 'ib-mfd-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into omap-for-v3.16/pm

Immutable branch between MFD and ARM OMAP due for v3.16 merge-window.
......@@ -46,15 +46,8 @@
static bool is_offset_valid;
static u8 smps_offset;
/*
* Flag to ensure Smartreflex bit in TWL
* being cleared in board file is not overwritten.
*/
static bool __initdata twl_sr_enable_autoinit;
#define TWL4030_DCDC_GLOBAL_CFG 0x06
#define REG_SMPS_OFFSET 0xE0
#define SMARTREFLEX_ENABLE BIT(3)
static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
......@@ -251,18 +244,6 @@ int __init omap3_twl_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
/*
* The smartreflex bit on twl4030 specifies if the setting of voltage
* is done over the I2C_SR path. Since this setting is independent of
* the actual usage of smartreflex AVS module, we enable TWL SR bit
* by default irrespective of whether smartreflex AVS module is enabled
* on the OMAP side or not. This is because without this bit enabled,
* the voltage scaling through vp forceupdate/bypass mechanism of
* voltage scaling will not function on TWL over I2C_SR.
*/
if (!twl_sr_enable_autoinit)
omap3_twl_set_sr_bit(true);
voltdm = voltdm_lookup("mpu_iva");
omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
......@@ -271,44 +252,3 @@ int __init omap3_twl_init(void)
return 0;
}
/**
* omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
* @enable: enable SR mode in twl or not
*
* If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
* voltage scaling through OMAP SR works. Else, the smartreflex bit
* on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
* use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
* Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
* in those scenarios this bit is to be cleared (enable = false).
*
* Returns 0 on success, error is returned if I2C read/write fails.
*/
int __init omap3_twl_set_sr_bit(bool enable)
{
u8 temp;
int ret;
if (twl_sr_enable_autoinit)
pr_warning("%s: unexpected multiple calls\n", __func__);
ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
TWL4030_DCDC_GLOBAL_CFG);
if (ret)
goto err;
if (enable)
temp |= SMARTREFLEX_ENABLE;
else
temp &= ~SMARTREFLEX_ENABLE;
ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
TWL4030_DCDC_GLOBAL_CFG);
if (!ret) {
twl_sr_enable_autoinit = true;
return 0;
}
err:
pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
return ret;
}
......@@ -98,7 +98,11 @@
#define TWL4030_BASEADD_BACKUP 0x0014
#define TWL4030_BASEADD_INT 0x002E
#define TWL4030_BASEADD_PM_MASTER 0x0036
#define TWL4030_BASEADD_PM_RECEIVER 0x005B
#define TWL4030_DCDC_GLOBAL_CFG 0x06
#define SMARTREFLEX_ENABLE BIT(3)
#define TWL4030_BASEADD_RTC 0x001C
#define TWL4030_BASEADD_SECURED_REG 0x0000
......@@ -1204,6 +1208,11 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
* Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
* SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
*
* Also, always enable SmartReflex bit as that's needed for omaps to
* to do anything over I2C4 for voltage scaling even if SmartReflex
* is disabled. Without the SmartReflex bit omap sys_clkreq idle
* signal will never trigger for retention idle.
*/
if (twl_class_is_4030()) {
u8 temp;
......@@ -1212,6 +1221,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
TWL4030_DCDC_GLOBAL_CFG);
temp |= SMARTREFLEX_ENABLE;
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
TWL4030_DCDC_GLOBAL_CFG);
}
if (node) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册