Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk()
  fixes, Documentation and MAINTAINERS updates)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  MAINTAINERS: update my e-mail address
  mod_devicetable: add space before */
  scsi: a100u2w: trivial typo in printk
  i2c: Fix typo in i2c-bfin-twi.c
  treewide: fix typos in comment blocks
  Doc: fix trivial typo in SubmittingPatches
  proportions: Spelling s/consitent/consistent/
  dm: Spelling s/consitent/consistent/
  aic7xxx: Fix typo in error message
  pcmcia: Fix typo in locking documentation
  scsi/arcmsr: Fix typos in error log
  drm/nouveau/gr: Fix typo in nv10.c
  [SCSI] Fix printk typos in drivers/scsi
  staging: comedi: Grammar s/Enable support a/Enable support for a/
  Btrfs: Spelling s/consitent/consistent/
  README: GTK+ is a acronym
  ASoC: omap: Fix typo in config option description
  mm: tlb.c: Fix error message
  ntfs: super.c: Fix error log
  fix typo in Documentation/SubmittingPatches
  ...

Documentation/SubmittingPatches

@@ -291,7 +291,7 @@ sending him e-mail.
 
 If you have a patch that fixes an exploitable security bug, send that patch
 to security@kernel.org.  For severe bugs, a short embargo may be considered
-to allow distrbutors to get the patch out to users; in such cases,
+to allow distributors to get the patch out to users; in such cases,
 obviously, the patch should not be sent to any public lists.
 
 Patches that fix a severe bug in a released kernel should be directed

Documentation/pcmcia/locking.txt

@@ -96,7 +96,7 @@ or single-use fields not mentioned):
 3. Per PCMCIA-device Data:
 --------------------------
 
-The "main" struct pcmcia_devie is protected as follows (read-only fields
+The "main" struct pcmcia_device is protected as follows (read-only fields
 or single-use fields not mentioned):
 
 

MAINTAINERS

@@ -361,7 +361,7 @@ S:	Supported
 F:	drivers/input/touchscreen/ad7879.c
 
 ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 S:	Maintained
 
 ADM1025 HARDWARE MONITOR DRIVER
@@ -752,7 +752,7 @@ S:	Maintained
 F:	sound/aoa/
 
 APM DRIVER
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 S:	Odd fixes
 F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
@@ -4264,7 +4264,7 @@ S:	Maintained
 F:	drivers/block/rsxx/
 
 FLOPPY DRIVER
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
 S:	Odd fixes
 F:	drivers/block/floppy.c
@@ -4835,7 +4835,7 @@ F:	include/linux/pm.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -4844,7 +4844,7 @@ F:	include/linux/hid*
 F:	include/uapi/linux/hid*
 
 HID SENSOR HUB DRIVERS
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 M:	Jonathan Cameron <jic23@kernel.org>
 M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 L:	linux-input@vger.kernel.org
@@ -5597,7 +5597,7 @@ F:	include/uapi/linux/ip_vs.h
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 M:	David Sterba <dsterba@suse.com>
 S:	Odd Fixes
 F:	drivers/tty/ipwireless/
@@ -6286,7 +6286,7 @@ F:	drivers/platform/x86/hp_accel.c
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
 M:	Seth Jennings <sjenning@redhat.com>
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 M:	Vojtech Pavlik <vojtech@suse.com>
 S:	Maintained
 F:	kernel/livepatch/
@@ -8062,7 +8062,7 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
@@ -10668,7 +10668,7 @@ F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-M:	Jiri Kosina <jkosina@suse.com>
+M:	Jiri Kosina <jikos@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained

arch/ia64/mm/tlb.c

@@ -444,7 +444,7 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size)
 			if (p->pte & 0x1)
 				if (is_tr_overlap(p, va, log_size)) {
 					printk(KERN_DEBUG "Overlapped Entry"
-						"Inserted for TR Reigster!!\n");
+						"Inserted for TR Register!!\n");
 					goto out;
 			}
 		}
@@ -456,7 +456,7 @@ int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size)
 			if (p->pte & 0x1)
 				if (is_tr_overlap(p, va, log_size)) {
 					printk(KERN_DEBUG "Overlapped Entry"
-						"Inserted for TR Reigster!!\n");
+						"Inserted for TR Register!!\n");
 					goto out;
 				}
 		}

arch/metag/include/asm/elf.h

@@ -11,7 +11,7 @@
 #define R_METAG_RELBRANCH                4
 #define R_METAG_GETSETOFF                5
 
-/* Backward compatability */
+/* Backward compatibility */
 #define R_METAG_REG32OP1                 6
 #define R_METAG_REG32OP2                 7
 #define R_METAG_REG32OP3                 8

arch/mips/kernel/setup.c

@@ -476,7 +476,7 @@ static void __init bootmem_init(void)
  *  o bootmem_init()
  *  o sparse_init()
  *  o paging_init()
- *  o dma_continguous_reserve()
+ *  o dma_contiguous_reserve()
  *
  * At this stage the bootmem allocator is ready to use.
  *

arch/powerpc/kvm/book3s.c

@@ -902,7 +902,7 @@ int kvmppc_core_check_processor_compat(void)
 {
 	/*
 	 * We always return 0 for book3s. We check
-	 * for compatability while loading the HV
+	 * for compatibility while loading the HV
 	 * or PR module
 	 */
 	return 0;

arch/powerpc/sysdev/fsl_pci.c

@@ -1113,7 +1113,7 @@ static int fsl_pci_pme_probe(struct pci_controller *hose)
 			IRQF_SHARED,
 			"[PCI] PME", hose);
 	if (res < 0) {
-		dev_err(&dev->dev, "Unable to requiest irq %d for PME\n", pme_irq);
+		dev_err(&dev->dev, "Unable to request irq %d for PME\n", pme_irq);
 		irq_dispose_mapping(pme_irq);
 
 		return -ENODEV;

arch/sparc/include/uapi/asm/pstate.h

@@ -88,7 +88,7 @@
 #define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
 #define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
 
-/* Compatability Feature Register (%asr26), SPARC-T4 and later  */
+/* Compatibility Feature Register (%asr26), SPARC-T4 and later  */
 #define CFR_AES		_AC(0x0000000000000001,UL) /* Supports AES opcodes     */
 #define CFR_DES		_AC(0x0000000000000002,UL) /* Supports DES opcodes     */
 #define CFR_KASUMI	_AC(0x0000000000000004,UL) /* Supports KASUMI opcodes  */

drivers/gpio/gpiolib-acpi.c

@@ -68,7 +68,7 @@ static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
  * GPIO controller driver.
  *
  * Typically the returned offset is same as @pin, but if the GPIO
- * controller uses pin controller and the mapping is not contigous the
+ * controller uses pin controller and the mapping is not contiguous the
  * offset might be different.
  */
 static int acpi_gpiochip_pin_to_gpio_offset(struct gpio_chip *chip, int pin)

drivers/gpu/drm/drm_atomic_helper.c

@@ -750,7 +750,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
  * This function shuts down all the outputs that need to be shut down and
  * prepares them (if required) with the new mode.
  *
- * For compatability with legacy crtc helpers this should be called before
+ * For compatibility with legacy crtc helpers this should be called before
  * drm_atomic_helper_commit_planes(), which is what the default commit function
  * does. But drivers with different needs can group the modeset commits together
  * and do the plane commits at the end. This is useful for drivers doing runtime
@@ -775,7 +775,7 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables);
  * This function enables all the outputs with the new configuration which had to
  * be turned off for the update.
  *
- * For compatability with legacy crtc helpers this should be called after
+ * For compatibility with legacy crtc helpers this should be called after
  * drm_atomic_helper_commit_planes(), which is what the default commit function
  * does. But drivers with different needs can group the modeset commits together
  * and do the plane commits at the end. This is useful for drivers doing runtime

drivers/gpu/drm/nouveau/nvkm/engine/gr/nv10.c

@@ -845,7 +845,7 @@ nv10_gr_ctx_regs_find_offset(struct nv10_gr_priv *priv, int reg)
 		if (nv10_gr_ctx_regs[i] == reg)
 			return i;
 	}
-	nv_error(priv, "unknow offset nv10_ctx_regs %d\n", reg);
+	nv_error(priv, "unknown offset nv10_ctx_regs %d\n", reg);
 	return -1;
 }
 
@@ -857,7 +857,7 @@ nv17_gr_ctx_regs_find_offset(struct nv10_gr_priv *priv, int reg)
 		if (nv17_gr_ctx_regs[i] == reg)
 			return i;
 	}
-	nv_error(priv, "unknow offset nv17_ctx_regs %d\n", reg);
+	nv_error(priv, "unknown offset nv17_ctx_regs %d\n", reg);
 	return -1;
 }
 

drivers/gpu/drm/via/via_dmablit.c

@@ -260,7 +260,7 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 /*
  * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
  * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
- * quite large for some blits, and pages don't need to be contingous.
+ * quite large for some blits, and pages don't need to be contiguous.
  */
 
 static int

drivers/gpu/drm/vmwgfx/vmwgfx_drv.h

@@ -227,7 +227,7 @@ enum vmw_dma_map_mode {
  * device-specific information.
  *
  * @sgt: Pointer to a struct sg_table with binding information
- * @num_regions: Number of regions with device-address contigous pages
+ * @num_regions: Number of regions with device-address contiguous pages
  */
 struct vmw_sg_table {
 	enum vmw_dma_map_mode mode;

drivers/input/touchscreen/ili210x.c

@@ -216,7 +216,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 	/* get panel info */
 	error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
 	if (error) {
-		dev_err(dev, "Failed to get panel informations, err: %d\n",
+		dev_err(dev, "Failed to get panel information, err: %d\n",
 			error);
 		return error;
 	}
@@ -276,7 +276,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 
 	error = input_register_device(priv->input);
 	if (error) {
-		dev_err(dev, "Cannot regiser input device, err: %d\n", error);
+		dev_err(dev, "Cannot register input device, err: %d\n", error);
 		goto err_remove_sysfs;
 	}
 

drivers/isdn/mISDN/dsp_cmx.c

@@ -506,7 +506,7 @@ dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp)
 		       __func__, conf->id);
 
 	if (list_empty(&conf->mlist)) {
-		printk(KERN_ERR "%s: conference whithout members\n",
+		printk(KERN_ERR "%s: conference without members\n",
 		       __func__);
 		return;
 	}

drivers/mailbox/arm_mhu.c

@@ -96,7 +96,7 @@ static int mhu_startup(struct mbox_chan *chan)
 			  IRQF_SHARED, "mhu_link", chan);
 	if (ret) {
 		dev_err(chan->mbox->dev,
-			"Unable to aquire IRQ %d\n", mlink->irq);
+			"Unable to acquire IRQ %d\n", mlink->irq);
 		return ret;
 	}
 

drivers/md/Kconfig

@@ -478,7 +478,7 @@ config DM_LOG_WRITES
 	  This device-mapper target takes two devices, one device to use
 	  normally, one to log all write operations done to the first device.
 	  This is for use by file system developers wishing to verify that
-	  their fs is writing a consitent file system at all times by allowing
+	  their fs is writing a consistent file system at all times by allowing
 	  them to replay the log in a variety of ways and to check the
 	  contents.
 

drivers/media/dvb-frontends/au8522_dig.c

@@ -922,7 +922,7 @@ module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Enable verbose debug messages");
 
 module_param(zv_mode, int, 0644);
-MODULE_PARM_DESC(zv_mode, "Turn on/off ZeeVee modulator compatability mode (default:on).\n"
+MODULE_PARM_DESC(zv_mode, "Turn on/off ZeeVee modulator compatibility mode (default:on).\n"
 	"\t\ton - modified AU8522 QAM256 initialization.\n"
 	"\t\tProvides faster lock when using ZeeVee modulator based sources");
 

drivers/media/platform/exynos4-is/fimc-m2m.c

@@ -188,7 +188,7 @@ static int fimc_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
 	if (IS_ERR(f))
 		return PTR_ERR(f);
 	/*
-	 * Return number of non-contigous planes (plane buffers)
+	 * Return number of non-contiguous planes (plane buffers)
 	 * depending on the configured color format.
 	 */
 	if (!f->fmt)

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c

@@ -1734,7 +1734,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)
 
 	mfc_debug(1, "New context: %d\n", new_ctx);
 	ctx = dev->ctx[new_ctx];
-	mfc_debug(1, "Seting new context to %p\n", ctx);
+	mfc_debug(1, "Setting new context to %p\n", ctx);
 	/* Got context to run in ctx */
 	mfc_debug(1, "ctx->dst_queue_cnt=%d ctx->dpb_count=%d ctx->src_queue_cnt=%d\n",
 		ctx->dst_queue_cnt, ctx->pb_count, ctx->src_queue_cnt);

drivers/media/v4l2-core/videobuf2-memops.c

@@ -125,7 +125,7 @@ int vb2_get_contig_userptr(unsigned long vaddr, unsigned long size,
 	}
 
 	/*
-	 * Memory is contigous, lock vma and return to the caller
+	 * Memory is contiguous, lock vma and return to the caller
 	 */
 	*res_vma = vb2_get_vma(vma);
 	if (*res_vma == NULL)

drivers/net/ethernet/amd/xgbe/xgbe.h

@@ -140,7 +140,7 @@
 
 #define XGBE_TX_MAX_BUF_SIZE	(0x3fff & ~(64 - 1))
 
-/* Descriptors required for maximum contigous TSO/GSO packet */
+/* Descriptors required for maximum contiguous TSO/GSO packet */
 #define XGBE_TX_MAX_SPLIT	((GSO_MAX_SIZE / XGBE_TX_MAX_BUF_SIZE) + 1)
 
 /* Maximum possible descriptors needed for an SKB:

drivers/net/wireless/ath/ath6kl/wmi.c

@@ -154,7 +154,7 @@ struct ath6kl_vif *ath6kl_get_vif_by_index(struct ath6kl *ar, u8 if_idx)
 }
 
 /*  Performs DIX to 802.3 encapsulation for transmit packets.
- *  Assumes the entire DIX header is contigous and that there is
+ *  Assumes the entire DIX header is contiguous and that there is
  *  enough room in the buffer for a 802.3 mac header and LLC+SNAP headers.
  */
 int ath6kl_wmi_dix_2_dot3(struct wmi *wmi, struct sk_buff *skb)
@@ -449,7 +449,7 @@ int ath6kl_wmi_dot11_hdr_remove(struct wmi *wmi, struct sk_buff *skb)
 
 /*
  * Performs 802.3 to DIX encapsulation for received packets.
- * Assumes the entire 802.3 header is contigous.
+ * Assumes the entire 802.3 header is contiguous.
  */
 int ath6kl_wmi_dot3_2_dix(struct sk_buff *skb)
 {

drivers/net/wireless/ipw2x00/ipw2100.h

@@ -746,7 +746,7 @@ struct ipw2100_priv {
 #define IPW_REG_GPIO			IPW_REG_DOMAIN_0_OFFSET + 0x0030
 #define IPW_REG_FW_TYPE                 IPW_REG_DOMAIN_1_OFFSET + 0x0188
 #define IPW_REG_FW_VERSION 		IPW_REG_DOMAIN_1_OFFSET + 0x018C
-#define IPW_REG_FW_COMPATABILITY_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x0190
+#define IPW_REG_FW_COMPATIBILITY_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x0190
 
 #define IPW_REG_INDIRECT_ADDR_MASK	0x00FFFFFC
 

drivers/scsi/53c700.c

@@ -299,7 +299,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	memory = dma_alloc_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
 				       &pScript, GFP_KERNEL);
 	if(memory == NULL) {
-		printk(KERN_ERR "53c700: Failed to allocate memory for driver, detatching\n");
+		printk(KERN_ERR "53c700: Failed to allocate memory for driver, detaching\n");
 		return NULL;
 	}
 

drivers/scsi/a100u2w.c

@@ -888,7 +888,7 @@ static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struc
 	scb->sense_len = SENSE_SIZE;
 	scb->cdb_len = cmd->cmd_len;
 	if (scb->cdb_len >= IMAX_CDB) {
-		printk("max cdb length= %x\b", cmd->cmd_len);
+		printk("max cdb length= %x\n", cmd->cmd_len);
 		scb->cdb_len = IMAX_CDB;
 	}
 	scb->ident = (u8)(cmd->device->lun & 0xff) | DISC_ALLOW;

drivers/scsi/aic7xxx/aic7xxx_core.c

@@ -79,7 +79,7 @@ struct ahc_hard_error_entry {
 
 static const struct ahc_hard_error_entry ahc_hard_errors[] = {
 	{ ILLHADDR,	"Illegal Host Access" },
-	{ ILLSADDR,	"Illegal Sequencer Address referrenced" },
+	{ ILLSADDR,	"Illegal Sequencer Address referenced" },
 	{ ILLOPCODE,	"Illegal Opcode in sequencer program" },
 	{ SQPARERR,	"Sequencer Parity Error" },
 	{ DPARERR,	"Data-path Parity Error" },

drivers/scsi/arcmsr/arcmsr_hba.c

@@ -3264,7 +3264,7 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
 		reg->doneq_index = 0;
 		writel(ARCMSR_MESSAGE_SET_POST_WINDOW, reg->drv2iop_doorbell);
 		if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
-			printk(KERN_NOTICE "arcmsr%d:can not set diver mode\n", \
+			printk(KERN_NOTICE "arcmsr%d: cannot set driver mode\n", \
 				acb->host->host_no);
 			return 1;
 		}

drivers/scsi/fcoe/fcoe_transport.c

@@ -58,7 +58,7 @@ MODULE_PARM_DESC(show, " Show attached FCoE transports");
 module_param_call(create, fcoe_transport_create, NULL,
 		  (void *)FIP_MODE_FABRIC, S_IWUSR);
 __MODULE_PARM_TYPE(create, "string");
-MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface");
+MODULE_PARM_DESC(create, " Creates fcoe instance on an ethernet interface");
 
 module_param_call(create_vn2vn, fcoe_transport_create, NULL,
 		  (void *)FIP_MODE_VN2VN, S_IWUSR);
@@ -68,15 +68,15 @@ MODULE_PARM_DESC(create_vn2vn, " Creates a VN_node to VN_node FCoE instance "
 
 module_param_call(destroy, fcoe_transport_destroy, NULL, NULL, S_IWUSR);
 __MODULE_PARM_TYPE(destroy, "string");
-MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface");
+MODULE_PARM_DESC(destroy, " Destroys fcoe instance on an ethernet interface");
 
 module_param_call(enable, fcoe_transport_enable, NULL, NULL, S_IWUSR);
 __MODULE_PARM_TYPE(enable, "string");
-MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface.");
+MODULE_PARM_DESC(enable, " Enables fcoe on an ethernet interface.");
 
 module_param_call(disable, fcoe_transport_disable, NULL, NULL, S_IWUSR);
 __MODULE_PARM_TYPE(disable, "string");
-MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface.");
+MODULE_PARM_DESC(disable, " Disables fcoe on an ethernet interface.");
 
 /* notification function for packets from net device */
 static struct notifier_block libfcoe_notifier = {

drivers/scsi/scsi_transport_iscsi.c

@@ -3037,7 +3037,7 @@ iscsi_get_chap(struct iscsi_transport *transport, struct nlmsghdr *nlh)
 
 	shost = scsi_host_lookup(ev->u.get_chap.host_no);
 	if (!shost) {
-		printk(KERN_ERR "%s: failed. Cound not find host no %u\n",
+		printk(KERN_ERR "%s: failed. Could not find host no %u\n",
 		       __func__, ev->u.get_chap.host_no);
 		return -ENODEV;
 	}

drivers/scsi/scsi_transport_spi.c

@@ -786,10 +786,10 @@ spi_dv_retrain(struct scsi_device *sdev, u8 *buffer, u8 *ptr,
 		 * IU, then QAS (if we can control them), then finally
 		 * fall down the periods */
 		if (i->f->set_iu && spi_iu(starget)) {
-			starget_printk(KERN_ERR, starget, "Domain Validation Disabing Information Units\n");
+			starget_printk(KERN_ERR, starget, "Domain Validation Disabling Information Units\n");
 			DV_SET(iu, 0);
 		} else if (i->f->set_qas && spi_qas(starget)) {
-			starget_printk(KERN_ERR, starget, "Domain Validation Disabing Quick Arbitration and Selection\n");
+			starget_printk(KERN_ERR, starget, "Domain Validation Disabling Quick Arbitration and Selection\n");
 			DV_SET(qas, 0);
 		} else {
 			newperiod = spi_period(starget);

drivers/scsi/wd719x.c

@@ -590,7 +590,7 @@ static inline void wd719x_interrupt_SCB(struct wd719x *wd,
 		dev_dbg(&wd->pdev->dev, "selection timeout\n");
 		break;
 	case WD719X_SUE_RESET:
-		dev_dbg(&wd->pdev->dev, "bus reset occured\n");
+		dev_dbg(&wd->pdev->dev, "bus reset occurred\n");
 		result = DID_RESET;
 		break;
 	case WD719X_SUE_BUSERROR:

drivers/usb/dwc2/core.c

@@ -3175,7 +3175,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 		hw->hs_phy_type);
 	dev_dbg(hsotg->dev, "  fs_phy_type=%d\n",
 		hw->fs_phy_type);
-	dev_dbg(hsotg->dev, "  utmi_phy_data_wdith=%d\n",
+	dev_dbg(hsotg->dev, "  utmi_phy_data_width=%d\n",
 		hw->utmi_phy_data_width);
 	dev_dbg(hsotg->dev, "  num_dev_ep=%d\n",
 		hw->num_dev_ep);

drivers/usb/gadget/udc/bdc/bdc.h

@@ -290,7 +290,7 @@ struct bdc_sr {
 	__le32 offset[4];
 };
 
-/* bd_table: contigous bd's in a table */
+/* bd_table: contiguous bd's in a table */
 struct bd_table {
 	struct bdc_bd *start_bd;
 	/* dma address of start bd of table*/

drivers/w1/masters/matrox_w1.c

@@ -40,7 +40,7 @@
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
-MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio).");
+MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire protocol) over VGA DDC(matrox gpio).");
 
 static struct pci_device_id matrox_w1_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },

fs/btrfs/qgroup.c

@@ -376,7 +376,7 @@ int btrfs_read_qgroup_config(struct btrfs_fs_info *fs_info)
 		qgroup = find_qgroup_rb(fs_info, found_key.offset);
 		if ((qgroup && found_key.type == BTRFS_QGROUP_INFO_KEY) ||
 		    (!qgroup && found_key.type == BTRFS_QGROUP_LIMIT_KEY)) {
-			btrfs_err(fs_info, "inconsitent qgroup config");
+			btrfs_err(fs_info, "inconsistent qgroup config");
 			flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
 		}
 		if (!qgroup) {

fs/ecryptfs/mmap.c

@@ -299,7 +299,7 @@ static int ecryptfs_write_begin(struct file *file,
 			rc = ecryptfs_read_lower_page_segment(
 				page, index, 0, PAGE_CACHE_SIZE, mapping->host);
 			if (rc) {
-				printk(KERN_ERR "%s: Error attemping to read "
+				printk(KERN_ERR "%s: Error attempting to read "
 				       "lower page segment; rc = [%d]\n",
 				       __func__, rc);
 				ClearPageUptodate(page);

fs/freevxfs/vxfs_lookup.c

@@ -192,7 +192,7 @@ vxfs_inode_by_name(struct inode *dip, struct dentry *dp)
  *   by @dp in @dip.
  *
  * Returns:
- *   A NULL-pointer on success, else an negative error code encoded
+ *   A NULL-pointer on success, else a negative error code encoded
  *   in the return pointer.
  */
 static struct dentry *

fs/ntfs/super.c

@@ -543,7 +543,7 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 			return -EROFS;
 		}
 		if (!ntfs_stamp_usnjrnl(vol)) {
-			ntfs_error(sb, "Failed to stamp transation log "
+			ntfs_error(sb, "Failed to stamp transaction log "
 					"($UsnJrnl)%s", es);
 			NVolSetErrors(vol);
 			return -EROFS;

fs/ocfs2/ocfs2_fs.h

@@ -168,7 +168,7 @@
 /* Refcount tree support */
 #define OCFS2_FEATURE_INCOMPAT_REFCOUNT_TREE	0x1000
 
-/* Discontigous block groups */
+/* Discontiguous block groups */
 #define OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG	0x2000
 
 /*
@@ -939,7 +939,7 @@ struct ocfs2_group_desc
 			/*
 			 * Block groups may be discontiguous when
 			 * OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG is set.
-			 * The extents of a discontigous block group are
+			 * The extents of a discontiguous block group are
 			 * stored in bg_list.  It is a flat list.
 			 * l_tree_depth must always be zero.  A
 			 * discontiguous group is signified by a non-zero

include/linux/mod_devicetable.h

@@ -253,7 +253,7 @@ struct pcmcia_device_id {
 
 	__u32 		prod_id_hash[4];
 
-	/* not matched against in kernelspace*/
+	/* not matched against in kernelspace */
 	const char *	prod_id[4];
 
 	/* not matched against */

include/linux/proportions.h

@@ -33,7 +33,7 @@ struct prop_global {
 /*
  * global proportion descriptor
  *
- * this is needed to consitently flip prop_global structures.
+ * this is needed to consistently flip prop_global structures.
  */
 struct prop_descriptor {
 	int index;

include/media/videobuf-core.h

@@ -37,7 +37,7 @@ struct videobuf_queue;
  *
  * about the mmap helpers (videobuf_mmap_*):
  *
- * The mmaper function allows to map any subset of contingous buffers.
+ * The mmaper function allows to map any subset of contiguous buffers.
  * This includes one mmap() call for all buffers (which the original
  * video4linux API uses) as well as one mmap() for every single buffer
  * (which v4l2 uses).

kernel/exit.c

@@ -1471,7 +1471,7 @@ static long do_wait(struct wait_opts *wo)
 	add_wait_queue(&current->signal->wait_chldexit, &wo->child_wait);
 repeat:
 	/*
-	 * If there is nothing that can match our critiera just get out.
+	 * If there is nothing that can match our criteria, just get out.
 	 * We will clear ->notask_error to zero if we see any child that
 	 * might later match our criteria, even if we are not able to reap
 	 * it yet.

mm/nommu.c

@@ -324,12 +324,12 @@ long vwrite(char *buf, char *addr, unsigned long count)
 }
 
 /*
- *	vmalloc  -  allocate virtually continguos memory
+ *	vmalloc  -  allocate virtually contiguous memory
  *
  *	@size:		allocation size
  *
  *	Allocate enough pages to cover @size from the page level
- *	allocator and map them into continguos kernel virtual space.
+ *	allocator and map them into contiguous kernel virtual space.
  *
  *	For tight control over page level allocator and protection flags
  *	use __vmalloc() instead.
@@ -341,12 +341,12 @@ void *vmalloc(unsigned long size)
 EXPORT_SYMBOL(vmalloc);
 
 /*
- *	vzalloc - allocate virtually continguos memory with zero fill
+ *	vzalloc - allocate virtually contiguous memory with zero fill
  *
  *	@size:		allocation size
  *
  *	Allocate enough pages to cover @size from the page level
- *	allocator and map them into continguos kernel virtual space.
+ *	allocator and map them into contiguous kernel virtual space.
  *	The memory allocated is set to zero.
  *
  *	For tight control over page level allocator and protection flags
@@ -420,7 +420,7 @@ void *vmalloc_exec(unsigned long size)
  *	@size:		allocation size
  *
  *	Allocate enough 32bit PA addressable pages to cover @size from the
- *	page level allocator and map them into continguos kernel virtual space.
+ *	page level allocator and map them into contiguous kernel virtual space.
  */
 void *vmalloc_32(unsigned long size)
 {

sound/soc/fsl/fsl_esai.c

@@ -517,7 +517,7 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 	u32 bclk, mask, val;
 	int ret;
 
-	/* Override slot_width if being specifially set */
+	/* Override slot_width if being specifically set */
 	if (esai_priv->slot_width)
 		slot_width = esai_priv->slot_width;
 

sound/soc/omap/Kconfig

@@ -24,7 +24,7 @@ config SND_OMAP_SOC_HDMI_AUDIO
 	  component also under DSS HDMI device. Dummy codec is used as
 	  as codec component. The hdmi audio driver implements also
 	  the card and registers it under its own platform device.
-	  The device for the dirver is registered by OMAPDSS hdmi
+	  The device for the driver is registered by OMAPDSS hdmi
 	  driver.
 
 config SND_OMAP_SOC_N810