提交 08261d87 编写于 作者: A Alexander Gordeev 提交者: Ingo Molnar

PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()

The new function pci_enable_msi_block_auto() tries to allocate
maximum possible number of MSIs up to the number the device
supports. It generalizes a pattern when pci_enable_msi_block()
is contiguously called until it succeeds or fails.

Opposite to pci_enable_msi_block() which takes the number of
MSIs to allocate as a input parameter,
pci_enable_msi_block_auto() could be used by device drivers to
obtain the number of assigned MSIs and the number of MSIs the
device supports.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c3de2419df94a0f95ca1a6f755afc421486455e6.1353324359.git.agordeev@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
上级 51906e77
......@@ -127,15 +127,42 @@ on the number of vectors that can be allocated; pci_enable_msi_block()
returns as soon as it finds any constraint that doesn't allow the
call to succeed.
4.2.3 pci_disable_msi
4.2.3 pci_enable_msi_block_auto
int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
This variation on pci_enable_msi() call allows a device driver to request
the maximum possible number of MSIs. The MSI specification only allows
interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
If this function returns a positive number, it indicates that it has
succeeded and the returned value is the number of allocated interrupts. In
this case, the function enables MSI on this device and updates dev->irq to
be the lowest of the new interrupts assigned to it. The other interrupts
assigned to the device are in the range dev->irq to dev->irq + returned
value - 1.
If this function returns a negative number, it indicates an error and
the driver should not attempt to request any more MSI interrupts for
this device.
If the device driver needs to know the number of interrupts the device
supports it can pass the pointer count where that number is stored. The
device driver must decide what action to take if pci_enable_msi_block_auto()
succeeds, but returns a value less than the number of interrupts supported.
If the device driver does not need to know the number of interrupts
supported, it can set the pointer count to NULL.
4.2.4 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
This function should be used to undo the effect of pci_enable_msi() or
pci_enable_msi_block(). Calling it restores dev->irq to the pin-based
interrupt number and frees the previously allocated message signaled
interrupt(s). The interrupt may subsequently be assigned to another
device, so drivers should not cache the value of dev->irq.
pci_enable_msi_block() or pci_enable_msi_block_auto(). Calling it restores
dev->irq to the pin-based interrupt number and frees the previously
allocated message signaled interrupt(s). The interrupt may subsequently be
assigned to another device, so drivers should not cache the value of
dev->irq.
Before calling this function, a device driver must always call free_irq()
on any interrupt for which it previously called request_irq().
......
......@@ -845,6 +845,32 @@ int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
}
EXPORT_SYMBOL(pci_enable_msi_block);
int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
{
int ret, pos, nvec;
u16 msgctl;
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (!pos)
return -EINVAL;
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
if (maxvec)
*maxvec = ret;
do {
nvec = ret;
ret = pci_enable_msi_block(dev, nvec);
} while (ret > 0);
if (ret < 0)
return ret;
return nvec;
}
EXPORT_SYMBOL(pci_enable_msi_block_auto);
void pci_msi_shutdown(struct pci_dev *dev)
{
struct msi_desc *desc;
......
......@@ -1101,6 +1101,12 @@ static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
return -1;
}
static inline int
pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
{
return -1;
}
static inline void pci_msi_shutdown(struct pci_dev *dev)
{ }
static inline void pci_disable_msi(struct pci_dev *dev)
......@@ -1132,6 +1138,7 @@ static inline int pci_msi_enabled(void)
}
#else
extern int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
extern int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
extern void pci_msi_shutdown(struct pci_dev *dev);
extern void pci_disable_msi(struct pci_dev *dev);
extern int pci_msix_table_size(struct pci_dev *dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册