提交 07b1747c 编写于 作者: V Vaibhav Hiremath 提交者: Mauro Carvalho Chehab

V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver

Signed-off-by: NBrijesh Jadav <brijesh.j@ti.com>
Signed-off-by: NHardik Shah <hardik.shah@ti.com>
Signed-off-by: NManjunath Hadli <mrh@ti.com>
Signed-off-by: NR Sivaraj <sivaraj@ti.com>
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NKaricheri Muralidharan <m-karicheri2@ti.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 67bc04dd
......@@ -361,6 +361,17 @@ config VIDEO_SAA7191
To compile this driver as a module, choose M here: the
module will be called saa7191.
config VIDEO_TVP514X
tristate "Texas Instruments TVP514x video decoder"
depends on VIDEO_V4L2 && I2C
---help---
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
controller.
To compile this driver as a module, choose M here: the
module will be called tvp514x.
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
......
......@@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_CX88) += cx88/
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
......
此差异已折叠。
/*
* drivers/media/video/tvp514x_regs.h
*
* Copyright (C) 2008 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* Contributors:
* Sivaraj R <sivaraj@ti.com>
* Brijesh R Jadav <brijesh.j@ti.com>
* Hardik Shah <hardik.shah@ti.com>
* Manjunath Hadli <mrh@ti.com>
* Karicheri Muralidharan <m-karicheri2@ti.com>
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifndef _TVP514X_REGS_H
#define _TVP514X_REGS_H
/*
* TVP5146/47 registers
*/
#define REG_INPUT_SEL (0x00)
#define REG_AFE_GAIN_CTRL (0x01)
#define REG_VIDEO_STD (0x02)
#define REG_OPERATION_MODE (0x03)
#define REG_AUTOSWITCH_MASK (0x04)
#define REG_COLOR_KILLER (0x05)
#define REG_LUMA_CONTROL1 (0x06)
#define REG_LUMA_CONTROL2 (0x07)
#define REG_LUMA_CONTROL3 (0x08)
#define REG_BRIGHTNESS (0x09)
#define REG_CONTRAST (0x0A)
#define REG_SATURATION (0x0B)
#define REG_HUE (0x0C)
#define REG_CHROMA_CONTROL1 (0x0D)
#define REG_CHROMA_CONTROL2 (0x0E)
/* 0x0F Reserved */
#define REG_COMP_PR_SATURATION (0x10)
#define REG_COMP_Y_CONTRAST (0x11)
#define REG_COMP_PB_SATURATION (0x12)
/* 0x13 Reserved */
#define REG_COMP_Y_BRIGHTNESS (0x14)
/* 0x15 Reserved */
#define REG_AVID_START_PIXEL_LSB (0x16)
#define REG_AVID_START_PIXEL_MSB (0x17)
#define REG_AVID_STOP_PIXEL_LSB (0x18)
#define REG_AVID_STOP_PIXEL_MSB (0x19)
#define REG_HSYNC_START_PIXEL_LSB (0x1A)
#define REG_HSYNC_START_PIXEL_MSB (0x1B)
#define REG_HSYNC_STOP_PIXEL_LSB (0x1C)
#define REG_HSYNC_STOP_PIXEL_MSB (0x1D)
#define REG_VSYNC_START_LINE_LSB (0x1E)
#define REG_VSYNC_START_LINE_MSB (0x1F)
#define REG_VSYNC_STOP_LINE_LSB (0x20)
#define REG_VSYNC_STOP_LINE_MSB (0x21)
#define REG_VBLK_START_LINE_LSB (0x22)
#define REG_VBLK_START_LINE_MSB (0x23)
#define REG_VBLK_STOP_LINE_LSB (0x24)
#define REG_VBLK_STOP_LINE_MSB (0x25)
/* 0x26 - 0x27 Reserved */
#define REG_FAST_SWTICH_CONTROL (0x28)
/* 0x29 Reserved */
#define REG_FAST_SWTICH_SCART_DELAY (0x2A)
/* 0x2B Reserved */
#define REG_SCART_DELAY (0x2C)
#define REG_CTI_DELAY (0x2D)
#define REG_CTI_CONTROL (0x2E)
/* 0x2F - 0x31 Reserved */
#define REG_SYNC_CONTROL (0x32)
#define REG_OUTPUT_FORMATTER1 (0x33)
#define REG_OUTPUT_FORMATTER2 (0x34)
#define REG_OUTPUT_FORMATTER3 (0x35)
#define REG_OUTPUT_FORMATTER4 (0x36)
#define REG_OUTPUT_FORMATTER5 (0x37)
#define REG_OUTPUT_FORMATTER6 (0x38)
#define REG_CLEAR_LOST_LOCK (0x39)
#define REG_STATUS1 (0x3A)
#define REG_STATUS2 (0x3B)
#define REG_AGC_GAIN_STATUS_LSB (0x3C)
#define REG_AGC_GAIN_STATUS_MSB (0x3D)
/* 0x3E Reserved */
#define REG_VIDEO_STD_STATUS (0x3F)
#define REG_GPIO_INPUT1 (0x40)
#define REG_GPIO_INPUT2 (0x41)
/* 0x42 - 0x45 Reserved */
#define REG_AFE_COARSE_GAIN_CH1 (0x46)
#define REG_AFE_COARSE_GAIN_CH2 (0x47)
#define REG_AFE_COARSE_GAIN_CH3 (0x48)
#define REG_AFE_COARSE_GAIN_CH4 (0x49)
#define REG_AFE_FINE_GAIN_PB_B_LSB (0x4A)
#define REG_AFE_FINE_GAIN_PB_B_MSB (0x4B)
#define REG_AFE_FINE_GAIN_Y_G_CHROMA_LSB (0x4C)
#define REG_AFE_FINE_GAIN_Y_G_CHROMA_MSB (0x4D)
#define REG_AFE_FINE_GAIN_PR_R_LSB (0x4E)
#define REG_AFE_FINE_GAIN_PR_R_MSB (0x4F)
#define REG_AFE_FINE_GAIN_CVBS_LUMA_LSB (0x50)
#define REG_AFE_FINE_GAIN_CVBS_LUMA_MSB (0x51)
/* 0x52 - 0x68 Reserved */
#define REG_FBIT_VBIT_CONTROL1 (0x69)
/* 0x6A - 0x6B Reserved */
#define REG_BACKEND_AGC_CONTROL (0x6C)
/* 0x6D - 0x6E Reserved */
#define REG_AGC_DECREMENT_SPEED_CONTROL (0x6F)
#define REG_ROM_VERSION (0x70)
/* 0x71 - 0x73 Reserved */
#define REG_AGC_WHITE_PEAK_PROCESSING (0x74)
#define REG_FBIT_VBIT_CONTROL2 (0x75)
#define REG_VCR_TRICK_MODE_CONTROL (0x76)
#define REG_HORIZONTAL_SHAKE_INCREMENT (0x77)
#define REG_AGC_INCREMENT_SPEED (0x78)
#define REG_AGC_INCREMENT_DELAY (0x79)
/* 0x7A - 0x7F Reserved */
#define REG_CHIP_ID_MSB (0x80)
#define REG_CHIP_ID_LSB (0x81)
/* 0x82 Reserved */
#define REG_CPLL_SPEED_CONTROL (0x83)
/* 0x84 - 0x96 Reserved */
#define REG_STATUS_REQUEST (0x97)
/* 0x98 - 0x99 Reserved */
#define REG_VERTICAL_LINE_COUNT_LSB (0x9A)
#define REG_VERTICAL_LINE_COUNT_MSB (0x9B)
/* 0x9C - 0x9D Reserved */
#define REG_AGC_DECREMENT_DELAY (0x9E)
/* 0x9F - 0xB0 Reserved */
#define REG_VDP_TTX_FILTER_1_MASK1 (0xB1)
#define REG_VDP_TTX_FILTER_1_MASK2 (0xB2)
#define REG_VDP_TTX_FILTER_1_MASK3 (0xB3)
#define REG_VDP_TTX_FILTER_1_MASK4 (0xB4)
#define REG_VDP_TTX_FILTER_1_MASK5 (0xB5)
#define REG_VDP_TTX_FILTER_2_MASK1 (0xB6)
#define REG_VDP_TTX_FILTER_2_MASK2 (0xB7)
#define REG_VDP_TTX_FILTER_2_MASK3 (0xB8)
#define REG_VDP_TTX_FILTER_2_MASK4 (0xB9)
#define REG_VDP_TTX_FILTER_2_MASK5 (0xBA)
#define REG_VDP_TTX_FILTER_CONTROL (0xBB)
#define REG_VDP_FIFO_WORD_COUNT (0xBC)
#define REG_VDP_FIFO_INTERRUPT_THRLD (0xBD)
/* 0xBE Reserved */
#define REG_VDP_FIFO_RESET (0xBF)
#define REG_VDP_FIFO_OUTPUT_CONTROL (0xC0)
#define REG_VDP_LINE_NUMBER_INTERRUPT (0xC1)
#define REG_VDP_PIXEL_ALIGNMENT_LSB (0xC2)
#define REG_VDP_PIXEL_ALIGNMENT_MSB (0xC3)
/* 0xC4 - 0xD5 Reserved */
#define REG_VDP_LINE_START (0xD6)
#define REG_VDP_LINE_STOP (0xD7)
#define REG_VDP_GLOBAL_LINE_MODE (0xD8)
#define REG_VDP_FULL_FIELD_ENABLE (0xD9)
#define REG_VDP_FULL_FIELD_MODE (0xDA)
/* 0xDB - 0xDF Reserved */
#define REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR (0xE0)
#define REG_VBUS_DATA_ACCESS_VBUS_ADDR_INCR (0xE1)
#define REG_FIFO_READ_DATA (0xE2)
/* 0xE3 - 0xE7 Reserved */
#define REG_VBUS_ADDRESS_ACCESS1 (0xE8)
#define REG_VBUS_ADDRESS_ACCESS2 (0xE9)
#define REG_VBUS_ADDRESS_ACCESS3 (0xEA)
/* 0xEB - 0xEF Reserved */
#define REG_INTERRUPT_RAW_STATUS0 (0xF0)
#define REG_INTERRUPT_RAW_STATUS1 (0xF1)
#define REG_INTERRUPT_STATUS0 (0xF2)
#define REG_INTERRUPT_STATUS1 (0xF3)
#define REG_INTERRUPT_MASK0 (0xF4)
#define REG_INTERRUPT_MASK1 (0xF5)
#define REG_INTERRUPT_CLEAR0 (0xF6)
#define REG_INTERRUPT_CLEAR1 (0xF7)
/* 0xF8 - 0xFF Reserved */
/*
* Mask and bit definitions of TVP5146/47 registers
*/
/* The ID values we are looking for */
#define TVP514X_CHIP_ID_MSB (0x51)
#define TVP5146_CHIP_ID_LSB (0x46)
#define TVP5147_CHIP_ID_LSB (0x47)
#define VIDEO_STD_MASK (0x07)
#define VIDEO_STD_AUTO_SWITCH_BIT (0x00)
#define VIDEO_STD_NTSC_MJ_BIT (0x01)
#define VIDEO_STD_PAL_BDGHIN_BIT (0x02)
#define VIDEO_STD_PAL_M_BIT (0x03)
#define VIDEO_STD_PAL_COMBINATION_N_BIT (0x04)
#define VIDEO_STD_NTSC_4_43_BIT (0x05)
#define VIDEO_STD_SECAM_BIT (0x06)
#define VIDEO_STD_PAL_60_BIT (0x07)
/*
* Status bit
*/
#define STATUS_TV_VCR_BIT (1<<0)
#define STATUS_HORZ_SYNC_LOCK_BIT (1<<1)
#define STATUS_VIRT_SYNC_LOCK_BIT (1<<2)
#define STATUS_CLR_SUBCAR_LOCK_BIT (1<<3)
#define STATUS_LOST_LOCK_DETECT_BIT (1<<4)
#define STATUS_FEILD_RATE_BIT (1<<5)
#define STATUS_LINE_ALTERNATING_BIT (1<<6)
#define STATUS_PEAK_WHITE_DETECT_BIT (1<<7)
/* Tokens for register write */
#define TOK_WRITE (0) /* token for write operation */
#define TOK_TERM (1) /* terminating token */
#define TOK_DELAY (2) /* delay token for reg list */
#define TOK_SKIP (3) /* token to skip a register */
/**
* struct tvp514x_reg - Structure for TVP5146/47 register initialization values
* @token - Token: TOK_WRITE, TOK_TERM etc..
* @reg - Register offset
* @val - Register Value for TOK_WRITE or delay in ms for TOK_DELAY
*/
struct tvp514x_reg {
u8 token;
u8 reg;
u32 val;
};
/**
* struct tvp514x_init_seq - Structure for TVP5146/47/46M2/47M1 power up
* Sequence.
* @ no_regs - Number of registers to write for power up sequence.
* @ init_reg_seq - Array of registers and respective value to write.
*/
struct tvp514x_init_seq {
unsigned int no_regs;
const struct tvp514x_reg *init_reg_seq;
};
#endif /* ifndef _TVP514X_REGS_H */
/*
* drivers/media/video/tvp514x.h
*
* Copyright (C) 2008 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* Contributors:
* Sivaraj R <sivaraj@ti.com>
* Brijesh R Jadav <brijesh.j@ti.com>
* Hardik Shah <hardik.shah@ti.com>
* Manjunath Hadli <mrh@ti.com>
* Karicheri Muralidharan <m-karicheri2@ti.com>
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifndef _TVP514X_H
#define _TVP514X_H
/*
* Other macros
*/
#define TVP514X_MODULE_NAME "tvp514x"
#define TVP514X_XCLK_BT656 (27000000)
/* Number of pixels and number of lines per frame for different standards */
#define NTSC_NUM_ACTIVE_PIXELS (720)
#define NTSC_NUM_ACTIVE_LINES (480)
#define PAL_NUM_ACTIVE_PIXELS (720)
#define PAL_NUM_ACTIVE_LINES (576)
/**
* enum tvp514x_input - enum for different decoder input pin
* configuration.
*/
enum tvp514x_input {
/*
* CVBS input selection
*/
INPUT_CVBS_VI1A = 0x0,
INPUT_CVBS_VI1B,
INPUT_CVBS_VI1C,
INPUT_CVBS_VI2A = 0x04,
INPUT_CVBS_VI2B,
INPUT_CVBS_VI2C,
INPUT_CVBS_VI3A = 0x08,
INPUT_CVBS_VI3B,
INPUT_CVBS_VI3C,
INPUT_CVBS_VI4A = 0x0C,
/*
* S-Video input selection
*/
INPUT_SVIDEO_VI2A_VI1A = 0x44,
INPUT_SVIDEO_VI2B_VI1B,
INPUT_SVIDEO_VI2C_VI1C,
INPUT_SVIDEO_VI2A_VI3A = 0x54,
INPUT_SVIDEO_VI2B_VI3B,
INPUT_SVIDEO_VI2C_VI3C,
INPUT_SVIDEO_VI4A_VI1A = 0x4C,
INPUT_SVIDEO_VI4A_VI1B,
INPUT_SVIDEO_VI4A_VI1C,
INPUT_SVIDEO_VI4A_VI3A = 0x5C,
INPUT_SVIDEO_VI4A_VI3B,
INPUT_SVIDEO_VI4A_VI3C,
/* Need to add entries for
* RGB, YPbPr and SCART.
*/
INPUT_INVALID
};
/**
* enum tvp514x_output - enum for output format
* supported.
*
*/
enum tvp514x_output {
OUTPUT_10BIT_422_EMBEDDED_SYNC = 0,
OUTPUT_20BIT_422_SEPERATE_SYNC,
OUTPUT_10BIT_422_SEPERATE_SYNC = 3,
OUTPUT_INVALID
};
/**
* struct tvp514x_platform_data - Platform data values and access functions.
* @power_set: Power state access function, zero is off, non-zero is on.
* @ifparm: Interface parameters access function.
* @priv_data_set: Device private data (pointer) access function.
* @clk_polarity: Clock polarity of the current interface.
* @ hs_polarity: HSYNC Polarity configuration for current interface.
* @ vs_polarity: VSYNC Polarity configuration for current interface.
*/
struct tvp514x_platform_data {
char *master;
int (*power_set) (enum v4l2_power on);
int (*ifparm) (struct v4l2_ifparm *p);
int (*priv_data_set) (void *);
/* Interface control params */
bool clk_polarity;
bool hs_polarity;
bool vs_polarity;
};
#endif /* ifndef _TVP514X_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册