drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable devices

For HSW+ platforms, enable the 5.4Ghz (HBR2) link rate for devices that support it. The
sink device must report that is supports Displayport 1.2 and the HBR2 bit rate in the
DPCD in order to use HBR2.
Signed-off-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_dp.c

@@ -98,13 +98,18 @@ static int
 intel_dp_max_link_bw(struct intel_dp *intel_dp)
 {
 	int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
+	struct drm_device *dev = intel_dp->attached_connector->base.dev;
 
 	switch (max_link_bw) {
 	case DP_LINK_BW_1_62:
 	case DP_LINK_BW_2_7:
 		break;
 	case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */
-		max_link_bw = DP_LINK_BW_2_7;
+		if ((IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) &&
+		    intel_dp->dpcd[DP_DPCD_REV] >= 0x12)
+			max_link_bw = DP_LINK_BW_5_4;
+		else
+			max_link_bw = DP_LINK_BW_2_7;
 		break;
 	default:
 		WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n",
@@ -807,9 +812,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	int lane_count, clock;
 	int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
-	int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
+	/* Conveniently, the link BW constants become indices with a shift...*/
+	int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
 	int bpp, mode_rate;
-	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+	static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
 	int link_avail, link_clock;
 
 	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
@@ -2644,10 +2650,15 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 	bool channel_eq = false;
 	int tries, cr_tries;
 	uint32_t DP = intel_dp->DP;
+	uint32_t training_pattern = DP_TRAINING_PATTERN_2;
+
+	/* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/
+	if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3)
+		training_pattern = DP_TRAINING_PATTERN_3;
 
 	/* channel equalization */
 	if (!intel_dp_set_link_train(intel_dp, &DP,
-				     DP_TRAINING_PATTERN_2 |
+				     training_pattern |
 				     DP_LINK_SCRAMBLING_DISABLE)) {
 		DRM_ERROR("failed to start channel equalization\n");
 		return;
@@ -2674,7 +2685,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 		if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
 			intel_dp_start_link_train(intel_dp);
 			intel_dp_set_link_train(intel_dp, &DP,
-						DP_TRAINING_PATTERN_2 |
+						training_pattern |
 						DP_LINK_SCRAMBLING_DISABLE);
 			cr_tries++;
 			continue;
@@ -2690,7 +2701,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			intel_dp_link_down(intel_dp);
 			intel_dp_start_link_train(intel_dp);
 			intel_dp_set_link_train(intel_dp, &DP,
-						DP_TRAINING_PATTERN_2 |
+						training_pattern |
 						DP_LINK_SCRAMBLING_DISABLE);
 			tries = 0;
 			cr_tries++;
@@ -2832,6 +2843,14 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 		}
 	}
 
+	/* Training Pattern 3 support */
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
+	    intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) {
+		intel_dp->use_tps3 = true;
+		DRM_DEBUG_KMS("Displayport TPS3 supported");
+	} else
+		intel_dp->use_tps3 = false;
+
 	if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
 	      DP_DWN_STRM_PORT_PRESENT))
 		return true; /* native DP sink */

drivers/gpu/drm/i915/intel_drv.h

@@ -491,6 +491,7 @@ struct intel_dp {
 	unsigned long last_power_on;
 	unsigned long last_backlight_off;
 	bool psr_setup_done;
+	bool use_tps3;
 	struct intel_connector *attached_connector;
 };