提交 0637a70a 编写于 作者: A Andi Kleen 提交者: Andi Kleen

[PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1

Some buggy systems can machine check when config space accesses
happen for some non existent devices.  i386/x86-64 do some early
device scans that might trigger this. Allow pci=noearly to disable
this. Also when type 1 is disabling also don't do any early
accesses which are always type1.

This moves the pci= configuration parsing to be a early parameter.
I don't think this can break anything because it only changes
a single global that is only used by PCI.

Cc: gregkh@suse.de
Cc: Trammell Hudson <hudson@osresearch.net>
Signed-off-by: NAndi Kleen <ak@suse.de>
上级 8f60774a
......@@ -1240,7 +1240,11 @@ running once the system is up.
bootloader. This is currently used on
IXP2000 systems where the bus has to be
configured a certain way for adjunct CPUs.
noearly [X86] Don't do any early type 1 scanning.
This might help on some broken boards which
machine check when some devices' config space
is read. But various workarounds are disabled
and some IOMMU drivers will not work.
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
......
......@@ -48,7 +48,11 @@ void __init check_acpi_pci(void)
int num, slot, func;
/* Assume the machine supports type 1. If not it will
always read ffffffff and should not have any side effect. */
always read ffffffff and should not have any side effect.
Actually a few buggy systems can machine check. Allow the user
to disable it by command line option at least -AK */
if (!early_pci_allowed())
return;
/* Poor man's PCI discovery */
for (num = 0; num < 32; num++) {
......
......@@ -242,6 +242,10 @@ char * __devinit pcibios_setup(char *str)
acpi_noirq_set();
return NULL;
}
else if (!strcmp(str, "noearly")) {
pci_probe |= PCI_PROBE_NOEARLY;
return NULL;
}
#ifndef CONFIG_X86_VISWS
else if (!strcmp(str, "usepirqmask")) {
pci_probe |= PCI_USE_PIRQ_MASK;
......
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
#include "pci.h"
/* Direct PCI access. This is used for PCI accesses in early boot before
the PCI subsystem works. */
......@@ -42,3 +44,9 @@ void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outl(val, 0xcfc);
}
int early_pci_allowed(void)
{
return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
PCI_PROBE_CONF1;
}
......@@ -17,6 +17,7 @@
#define PCI_PROBE_CONF2 0x0004
#define PCI_PROBE_MMCONF 0x0008
#define PCI_PROBE_MASK 0x000f
#define PCI_PROBE_NOEARLY 0x0010
#define PCI_NO_SORT 0x0100
#define PCI_BIOS_SORT 0x0200
......
......@@ -212,7 +212,7 @@ void __init iommu_hole_init(void)
u64 aper_base, last_aper_base = 0;
int valid_agp = 0;
if (iommu_aperture_disabled || !fix_aperture)
if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed())
return;
printk("Checking aperture...\n");
......
......@@ -82,6 +82,10 @@ static struct chipset early_qrk[] = {
void __init early_quirks(void)
{
int num, slot, func;
if (!early_pci_allowed())
return;
/* Poor man's PCI discovery */
for (num = 0; num < 32; num++) {
for (slot = 0; slot < 32; slot++) {
......
......@@ -924,6 +924,9 @@ void __init detect_calgary(void)
if (swiotlb || no_iommu || iommu_detected)
return;
if (!early_pci_allowed())
return;
specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
......
......@@ -20,6 +20,9 @@ static int __init vsmp_init(void)
void *address;
unsigned int cap, ctl;
if (!early_pci_allowed())
return 0;
/* Check if we are running on a ScaleMP vSMP box */
if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) ||
(read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL))
......
......@@ -54,6 +54,9 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
nodes_clear(nodes_parsed);
if (!early_pci_allowed())
return -1;
nb = find_northbridge();
if (nb < 0)
return nb;
......
......@@ -953,13 +953,12 @@ static int __devinit pci_setup(char *str)
}
str = k;
}
return 1;
return 0;
}
early_param("pci", pci_setup);
device_initcall(pci_init);
__setup("pci=", pci_setup);
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* FIXME: Some boxes have multiple ISA bridges! */
struct pci_dev *isa_bridge;
......
......@@ -11,4 +11,6 @@ extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
extern int early_pci_allowed(void);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册