提交 0542925b 编写于 作者: T Tejun Heo

[PATCH] sata_sil24: convert to new probing mechanism and add hotplug support

Convert to new probing mechanism and add hotplug support by enabling
PORT_IRQ_PHYRDY_CHG, marking ehi for hotplug and scheduling EH on
PORT_IRQ_PHYRDY_CHG or PORT_IRQ_DEV_XCHG.

Sil3124/32 family of controllers don't have any mechanism to wait for
the first D2H FIS after hotplug, so ATA_FLAG_SKIP_D2H_BSY is used.
Signed-off-by: NTejun Heo <htejun@gmail.com>
上级 4296971d
...@@ -159,7 +159,8 @@ enum { ...@@ -159,7 +159,8 @@ enum {
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS, PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
PORT_IRQ_UNK_FIS,
/* bits[27:16] are unmasked (raw) */ /* bits[27:16] are unmasked (raw) */
PORT_IRQ_RAW_SHIFT = 16, PORT_IRQ_RAW_SHIFT = 16,
...@@ -228,7 +229,7 @@ enum { ...@@ -228,7 +229,7 @@ enum {
/* host flags */ /* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ, ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf, IRQ_STAT_4PORTS = 0xf,
...@@ -325,7 +326,6 @@ static u8 sil24_check_status(struct ata_port *ap); ...@@ -325,7 +326,6 @@ static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
static void sil24_qc_prep(struct ata_queued_cmd *qc); static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap); static void sil24_irq_clear(struct ata_port *ap);
...@@ -385,8 +385,6 @@ static const struct ata_port_operations sil24_ops = { ...@@ -385,8 +385,6 @@ static const struct ata_port_operations sil24_ops = {
.tf_read = sil24_tf_read, .tf_read = sil24_tf_read,
.probe_reset = sil24_probe_reset,
.qc_prep = sil24_qc_prep, .qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue, .qc_issue = sil24_qc_issue,
...@@ -635,13 +633,6 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) ...@@ -635,13 +633,6 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
return -EIO; return -EIO;
} }
static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes)
{
return ata_drive_probe_reset(ap, ata_std_probeinit,
sil24_softreset, sil24_hardreset,
ata_std_postreset, classes);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc, static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge) struct sil24_sge *sge)
{ {
...@@ -772,13 +763,11 @@ static void sil24_error_intr(struct ata_port *ap) ...@@ -772,13 +763,11 @@ static void sil24_error_intr(struct ata_port *ap)
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
if (irq_stat & PORT_IRQ_DEV_XCHG) { if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
ehi->err_mask |= AC_ERR_ATA_BUS; ata_ehi_hotplugged(ehi);
/* sil24 doesn't recover very well from phy ata_ehi_push_desc(ehi, ", %s",
* disconnection with a softreset. Force hardreset. irq_stat & PORT_IRQ_PHYRDY_CHG ?
*/ "PHY RDY changed" : "device exchanged");
ehi->action |= ATA_EH_HARDRESET;
ata_ehi_push_desc(ehi, ", device_exchanged");
freeze = 1; freeze = 1;
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册