ath9k: Fix bug in calibration initialization

This patch fixes a bug in ath9k_hw_init_cal() where the wrong
calibration was being done for non-AR9285 chipsets.
Also add a few helpful comments.

Cc: stable@kernel.org
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/calib.c

@@ -918,83 +918,66 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 	return true;
 }
 
-bool ath9k_hw_init_cal(struct ath_hw *ah,
-		       struct ath9k_channel *chan)
+bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) {
 		if (!ar9285_clc(ah, chan))
 			return false;
-	} else if (AR_SREV_9280_10_OR_LATER(ah)) {
-		REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
-		REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
+	} else {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		}
 
-		/* Kick off the cal */
+		/* Calibrate the AGC */
 		REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-				REG_READ(ah, AR_PHY_AGC_CONTROL) |
-				AR_PHY_AGC_CONTROL_CAL);
+			  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+			  AR_PHY_AGC_CONTROL_CAL);
 
-		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
-					AR_PHY_AGC_CONTROL_CAL, 0,
-					AH_WAIT_TIMEOUT)) {
+		/* Poll for offset calibration complete */
+		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
+				   0, AH_WAIT_TIMEOUT)) {
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
 				"offset calibration failed to complete in 1ms; "
 				"noisy environment?\n");
 			return false;
 		}
 
-		REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
-		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
-	}
-
-	/* Calibrate the AGC */
-	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			AR_PHY_AGC_CONTROL_CAL);
-
-	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
-				0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"offset calibration failed to complete in 1ms; "
-			"noisy environment?\n");
-		return false;
-	}
-
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+			REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		}
 	}
 
 	/* Do PA Calibration */
 	if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
 		ath9k_hw_9285_pa_cal(ah);
 
-	/* Do NF Calibration */
+	/* Do NF Calibration after DC offset and other calibrations */
 	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			AR_PHY_AGC_CONTROL_NF);
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF);
 
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 
+	/* Enable IQ, ADC Gain and ADC DC offset CALs */
 	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
 		if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
 			INIT_CAL(&ah->adcgain_caldata);
 			INSERT_CAL(ah, &ah->adcgain_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling ADC Gain Calibration.\n");
+				"enabling ADC Gain Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
 			INIT_CAL(&ah->adcdc_caldata);
 			INSERT_CAL(ah, &ah->adcdc_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling ADC DC Calibration.\n");
+				"enabling ADC DC Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
 			INIT_CAL(&ah->iq_caldata);
 			INSERT_CAL(ah, &ah->iq_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling IQ Calibration.\n");
+				"enabling IQ Calibration.\n");
 		}
 
 		ah->cal_list_curr = ah->cal_list;