i2c-omap: In case of a NACK|ARDY|AL return from the ISR

In case of a NACK or ARDY or AL interrupt, complete the request.
There is no need to service the RRDY/RDR or XRDY/XDR interrupts.

Refer TRM SWPU114: Figure 18-31.I2C Master Transmitter Mode, Interrupt Method,
in F/S and HS Modes

http://focus.ti.com/pdfs/wtbu/SWPU114T_PrelimFinalEPDF_06_25_2009.pdfSigned-off-by: NMoiz Sonasath <m-sonasath@ti.com>
Signed-off-by: NVikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

drivers/i2c/busses/i2c-omap.c

@@ -685,8 +685,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			err |= OMAP_I2C_STAT_AL;
 		}
 		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
-					OMAP_I2C_STAT_AL))
+					OMAP_I2C_STAT_AL)) {
 			omap_i2c_complete_cmd(dev, err);
+			return IRQ_HANDLED;
+		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 			u8 num_bytes = 1;
 			if (dev->fifo_size) {