提交 04ab5918 编写于 作者: L Linus Torvalds

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Kill unused <asm/debug.h> inclusions
  MIPS: IP32: Add platform device for CMOS RTC; remove dead code
  RTC: M48T35: new RTC driver
  MIPS: IP27: Switch over to RTC class driver
  MIPS: DS1286: New RTC driver
  MIPS: IP22/28: Switch over to RTC class driver
  MIPS: PCI: Scan busses when they are registered
  MIPS: WGT634U: Add reset button support
  MIPS: BCM47xx: Use the new SSB GPIO API
  MIPS: BCM47xx: Remove references to BCM947XX
  MIPS: WGT634U: Add machine detection message
  MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFT
  MIPS: show_cpuinfo prints the type of the calling CPU
  MIPS: Fix wrong branch target in new spin_lock code.
  MIPS: Have a heart for a lonely, lost header file ...
......@@ -52,6 +52,7 @@ config BCM47XX
select SSB
select SSB_DRIVER_MIPS
select SSB_DRIVER_EXTIF
select SSB_EMBEDDED
select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
......
......@@ -12,68 +12,51 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
#include <asm/mach-bcm47xx/gpio.h>
int bcm47xx_gpio_to_irq(unsigned gpio)
#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
#else
static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
#endif
int gpio_request(unsigned gpio, const char *tag)
{
if (ssb_bcm47xx.chipco.dev)
return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
else if (ssb_bcm47xx.extif.dev)
return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
else
if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
return -EINVAL;
}
EXPORT_SYMBOL_GPL(bcm47xx_gpio_to_irq);
int bcm47xx_gpio_get_value(unsigned gpio)
{
if (ssb_bcm47xx.chipco.dev)
return ssb_chipco_gpio_in(&ssb_bcm47xx.chipco, 1 << gpio);
else if (ssb_bcm47xx.extif.dev)
return ssb_extif_gpio_in(&ssb_bcm47xx.extif, 1 << gpio);
else
return 0;
}
EXPORT_SYMBOL_GPL(bcm47xx_gpio_get_value);
if (ssb_extif_available(&ssb_bcm47xx.extif) &&
((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
return -EINVAL;
void bcm47xx_gpio_set_value(unsigned gpio, int value)
{
if (ssb_bcm47xx.chipco.dev)
ssb_chipco_gpio_out(&ssb_bcm47xx.chipco,
1 << gpio,
value ? 1 << gpio : 0);
else if (ssb_bcm47xx.extif.dev)
ssb_extif_gpio_out(&ssb_bcm47xx.extif,
1 << gpio,
value ? 1 << gpio : 0);
}
EXPORT_SYMBOL_GPL(bcm47xx_gpio_set_value);
if (test_and_set_bit(gpio, gpio_in_use))
return -EBUSY;
int bcm47xx_gpio_direction_input(unsigned gpio)
{
if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
1 << gpio, 0);
else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
1 << gpio, 0);
else
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_input);
EXPORT_SYMBOL(gpio_request);
int bcm47xx_gpio_direction_output(unsigned gpio, int value)
void gpio_free(unsigned gpio)
{
bcm47xx_gpio_set_value(gpio, value);
if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
return;
if (ssb_extif_available(&ssb_bcm47xx.extif) &&
((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
return;
clear_bit(gpio, gpio_in_use);
}
EXPORT_SYMBOL(gpio_free);
if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
1 << gpio, 1 << gpio);
else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
1 << gpio, 1 << gpio);
int gpio_to_irq(unsigned gpio)
{
if (ssb_chipco_available(&ssb_bcm47xx.chipco))
return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
else if (ssb_extif_available(&ssb_bcm47xx.extif))
return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
else
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_output);
EXPORT_SYMBOL_GPL(gpio_to_irq);
......@@ -27,6 +27,7 @@
#include <linux/types.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
......@@ -41,7 +42,7 @@ static void bcm47xx_machine_restart(char *command)
printk(KERN_ALERT "Please stand by while rebooting the system...\n");
local_irq_disable();
/* Set the watchdog timer to reset immediately */
ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 1);
ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
while (1)
cpu_relax();
}
......@@ -50,7 +51,7 @@ static void bcm47xx_machine_halt(void)
{
/* Disable interrupts and watchdog and spin forever */
local_irq_disable();
ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 0);
ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
while (1)
cpu_relax();
}
......
......@@ -11,6 +11,9 @@
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/ssb/ssb.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/gpio.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
/* GPIO definitions for the WGT634U */
......@@ -99,6 +102,30 @@ static struct platform_device *wgt634u_devices[] __initdata = {
&wgt634u_gpio_leds,
};
static irqreturn_t gpio_interrupt(int irq, void *ignored)
{
int state;
/* Interrupts are shared, check if the current one is
a GPIO interrupt. */
if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
SSB_CHIPCO_IRQ_GPIO))
return IRQ_NONE;
state = gpio_get_value(WGT634U_GPIO_RESET);
/* Interrupt are level triggered, revert the interrupt polarity
to clear the interrupt. */
gpio_polarity(WGT634U_GPIO_RESET, state);
if (!state) {
printk(KERN_INFO "Reset button pressed");
ctrl_alt_del();
}
return IRQ_HANDLED;
}
static int __init wgt634u_init(void)
{
/* There is no easy way to detect that we are running on a WGT634U
......@@ -112,6 +139,19 @@ static int __init wgt634u_init(void)
((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
(et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
printk(KERN_INFO "WGT634U machine detected.\n");
if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
gpio_interrupt, IRQF_SHARED,
"WGT634U GPIO", &ssb_bcm47xx.chipco)) {
gpio_direction_input(WGT634U_GPIO_RESET);
gpio_intmask(WGT634U_GPIO_RESET, 1);
ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
SSB_CHIPCO_IRQ_GPIO,
SSB_CHIPCO_IRQ_GPIO);
}
wgt634u_flash_data.width = mcore->flash_buswidth;
wgt634u_flash_resource.start = mcore->flash_window;
wgt634u_flash_resource.end = mcore->flash_window
......
......@@ -29,7 +29,6 @@
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
......
......@@ -30,7 +30,6 @@
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/debug.h>
const char *get_system_type(void)
{
......
......@@ -35,7 +35,6 @@
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/traps.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
......
......@@ -9,47 +9,46 @@
#ifndef __BCM47XX_GPIO_H
#define __BCM47XX_GPIO_H
#include <linux/ssb/ssb_embedded.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
#define BCM47XX_EXTIF_GPIO_LINES 5
#define BCM47XX_CHIPCO_GPIO_LINES 16
extern int bcm47xx_gpio_to_irq(unsigned gpio);
extern int bcm47xx_gpio_get_value(unsigned gpio);
extern void bcm47xx_gpio_set_value(unsigned gpio, int value);
extern int bcm47xx_gpio_direction_input(unsigned gpio);
extern int bcm47xx_gpio_direction_output(unsigned gpio, int value);
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
}
extern int gpio_request(unsigned gpio, const char *label);
extern void gpio_free(unsigned gpio);
extern int gpio_to_irq(unsigned gpio);
static inline void gpio_free(unsigned gpio)
static inline int gpio_get_value(unsigned gpio)
{
return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
}
static inline int gpio_to_irq(unsigned gpio)
static inline void gpio_set_value(unsigned gpio, int value)
{
return bcm47xx_gpio_to_irq(gpio);
ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
}
static inline int gpio_get_value(unsigned gpio)
static inline int gpio_direction_input(unsigned gpio)
{
return bcm47xx_gpio_get_value(gpio);
return ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
}
static inline void gpio_set_value(unsigned gpio, int value)
static inline int gpio_direction_output(unsigned gpio, int value)
{
bcm47xx_gpio_set_value(gpio, value);
return ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
}
static inline int gpio_direction_input(unsigned gpio)
static int gpio_intmask(unsigned gpio, int value)
{
return bcm47xx_gpio_direction_input(gpio);
return ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
value ? 1 << gpio : 0);
}
static inline int gpio_direction_output(unsigned gpio, int value)
static int gpio_polarity(unsigned gpio, int value)
{
return bcm47xx_gpio_direction_output(gpio, value);
return ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
value ? 1 << gpio : 0);
}
......
......@@ -5,8 +5,8 @@
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H
#define __ASM_MIPS_MACH_BCM947XX_WAR_H
#ifndef __ASM_MIPS_MACH_BCM47XX_WAR_H
#define __ASM_MIPS_MACH_BCM47XX_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
......@@ -22,4 +22,4 @@
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */
#endif /* __ASM_MIPS_MACH_BCM47XX_WAR_H */
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1998, 2001, 03 by Ralf Baechle
*
* RTC routines for PC style attached Dallas chip.
*/
#ifndef __ASM_MACH_IP22_DS1286_H
#define __ASM_MACH_IP22_DS1286_H
#include <asm/sgi/hpc3.h>
#define rtc_read(reg) (hpc3c0->rtcregs[(reg)] & 0xff)
#define rtc_write(data, reg) do { hpc3c0->rtcregs[(reg)] = (data); } while(0)
#endif /* __ASM_MACH_IP22_DS1286_H */
#ifndef __ASM_MACH_IP28_DS1286_H
#define __ASM_MACH_IP28_DS1286_H
#include <asm/mach-ip22/ds1286.h>
#endif /* __ASM_MACH_IP28_DS1286_H */
......@@ -147,7 +147,7 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lock)
" ori %[ticket], %[ticket], 0x2000 \n"
" xori %[ticket], %[ticket], 0x2000 \n"
" sc %[ticket], %[ticket_ptr] \n"
" beqzl %[ticket], 2f \n"
" beqzl %[ticket], 1b \n"
: [ticket_ptr] "+m" (lock->lock),
[ticket] "=&r" (tmp));
} else {
......
......@@ -39,7 +39,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "processor\t\t: %ld\n", n);
sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
cpu_data[n].options & MIPS_CPU_FPU ? " FPU V%d.%d" : "");
seq_printf(m, fmt, __cpu_name[smp_processor_id()],
seq_printf(m, fmt, __cpu_name[n],
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
......
......@@ -104,7 +104,7 @@ SECTIONS
. = ALIGN(_PAGE_SIZE);
__nosave_end = .;
. = ALIGN(32);
. = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
.data.cacheline_aligned : {
*(.data.cacheline_aligned)
}
......
......@@ -29,7 +29,6 @@
#include <linux/pci.h>
#include <asm/bootinfo.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
......
......@@ -29,8 +29,6 @@
#include <asm/mach-pnx8550/pci.h>
#include <asm/mach-pnx8550/glb.h>
#include <asm/debug.h>
static inline void clear_status(void)
{
......
......@@ -29,7 +29,6 @@
#include <linux/pci.h>
#include <asm/bootinfo.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
......
......@@ -34,6 +34,8 @@ static struct pci_controller *hose_head, **hose_tail = &hose_head;
unsigned long PCIBIOS_MIN_IO = 0x0000;
unsigned long PCIBIOS_MIN_MEM = 0;
static int pci_initialized;
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
......@@ -74,6 +76,42 @@ pcibios_align_resource(void *data, struct resource *res,
res->start = start;
}
static void __devinit pcibios_scanbus(struct pci_controller *hose)
{
static int next_busno;
static int need_domain_info;
struct pci_bus *bus;
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
if (hose->get_busno && pci_probe_only)
next_busno = (*hose->get_busno)();
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
need_domain_info = need_domain_info || hose->index;
hose->need_domain_info = need_domain_info;
if (bus) {
next_busno = bus->subordinate + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
if (next_busno > 224) {
next_busno = 0;
need_domain_info = 1;
}
if (!pci_probe_only) {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
pci_enable_bridges(bus);
}
}
}
static DEFINE_MUTEX(pci_scan_mutex);
void __devinit register_pci_controller(struct pci_controller *hose)
{
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
......@@ -93,6 +131,17 @@ void __devinit register_pci_controller(struct pci_controller *hose)
printk(KERN_WARNING
"registering PCI controller with io_map_base unset\n");
}
/*
* Scan the bus if it is register after the PCI subsystem
* initialization.
*/
if (pci_initialized) {
mutex_lock(&pci_scan_mutex);
pcibios_scanbus(hose);
mutex_unlock(&pci_scan_mutex);
}
return;
out:
......@@ -125,38 +174,15 @@ static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
static int __init pcibios_init(void)
{
struct pci_controller *hose;
struct pci_bus *bus;
int next_busno;
int need_domain_info = 0;
/* Scan all of the recorded PCI controllers. */
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
if (hose->get_busno && pci_probe_only)
next_busno = (*hose->get_busno)();
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
need_domain_info = need_domain_info || hose->index;
hose->need_domain_info = need_domain_info;
if (bus) {
next_busno = bus->subordinate + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
if (next_busno > 224) {
next_busno = 0;
need_domain_info = 1;
}
}
}
for (hose = hose_head; hose; hose = hose->next)
pcibios_scanbus(hose);
if (!pci_probe_only)
pci_assign_unassigned_resources();
pci_fixup_irqs(common_swizzle, pcibios_map_irq);
pci_initialized = 1;
return 0;
}
......
......@@ -28,7 +28,6 @@
#include <linux/timex.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/time.h>
#include <asm/mach-rc32434/rc32434.h>
......
......@@ -192,3 +192,18 @@ static int __init sgi_button_devinit(void)
}
device_initcall(sgi_button_devinit);
static int __init sgi_ds1286_devinit(void)
{
struct resource res;
memset(&res, 0, sizeof(res));
res.start = HPC3_CHIP0_BASE + offsetof(struct hpc3_regs, rtcregs);
res.end = res.start + sizeof(hpc3c0->rtcregs) - 1;
res.flags = IORESOURCE_MEM;
return IS_ERR(platform_device_register_simple("rtc-ds1286", -1,
&res, 1));
}
device_initcall(sgi_ds1286_devinit);
......@@ -4,7 +4,6 @@
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
* Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org)
*/
#include <linux/ds1286.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
......
......@@ -10,7 +10,6 @@
* Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/bcd.h>
#include <linux/ds1286.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel.h>
......@@ -29,69 +28,6 @@
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
/*
* Note that mktime uses month from 1 to 12 while rtc_time_to_tm
* uses 0 to 11.
*/
unsigned long read_persistent_clock(void)
{
unsigned int yrs, mon, day, hrs, min, sec;
unsigned int save_control;
unsigned long flags;
spin_lock_irqsave(&rtc_lock, flags);
save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
sec = BCD2BIN(hpc3c0->rtcregs[RTC_SECONDS] & 0xff);
min = BCD2BIN(hpc3c0->rtcregs[RTC_MINUTES] & 0xff);
hrs = BCD2BIN(hpc3c0->rtcregs[RTC_HOURS] & 0x3f);
day = BCD2BIN(hpc3c0->rtcregs[RTC_DATE] & 0xff);
mon = BCD2BIN(hpc3c0->rtcregs[RTC_MONTH] & 0x1f);
yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff);
hpc3c0->rtcregs[RTC_CMD] = save_control;
spin_unlock_irqrestore(&rtc_lock, flags);
if (yrs < 45)
yrs += 30;
if ((yrs += 40) < 70)
yrs += 100;
return mktime(yrs + 1900, mon, day, hrs, min, sec);
}
int rtc_mips_set_time(unsigned long tim)
{
struct rtc_time tm;
unsigned int save_control;
unsigned long flags;
rtc_time_to_tm(tim, &tm);
tm.tm_mon += 1; /* tm_mon starts at zero */
tm.tm_year -= 40;
if (tm.tm_year >= 100)
tm.tm_year -= 100;
spin_lock_irqsave(&rtc_lock, flags);
save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_year);
hpc3c0->rtcregs[RTC_MONTH] = BIN2BCD(tm.tm_mon);
hpc3c0->rtcregs[RTC_DATE] = BIN2BCD(tm.tm_mday);
hpc3c0->rtcregs[RTC_HOURS] = BIN2BCD(tm.tm_hour);
hpc3c0->rtcregs[RTC_MINUTES] = BIN2BCD(tm.tm_min);
hpc3c0->rtcregs[RTC_SECONDS] = BIN2BCD(tm.tm_sec);
hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0;
hpc3c0->rtcregs[RTC_CMD] = save_control;
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
static unsigned long dosample(void)
{
u32 ct0, ct1;
......
......@@ -13,12 +13,12 @@
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <asm/time.h>
#include <asm/pgtable.h>
#include <asm/sgialib.h>
#include <asm/sn/ioc3.h>
#include <asm/m48t35.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
......@@ -28,51 +28,6 @@
#define TICK_SIZE (tick_nsec / 1000)
#if 0
static int set_rtc_mmss(unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
struct m48t35_rtc *rtc;
nasid_t nid;
nid = get_nasid();
rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
IOC3_BYTEBUS_DEV0);
rtc->control |= M48T35_RTC_READ;
cmos_minutes = BCD2BIN(rtc->min);
rtc->control &= ~M48T35_RTC_READ;
/*
* Since we're only adjusting minutes and seconds, don't interfere with
* hour overflow. This avoids messing with unknown time zones but
* requires your RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
real_seconds = BIN2BCD(real_seconds);
real_minutes = BIN2BCD(real_minutes);
rtc->control |= M48T35_RTC_SET;
rtc->sec = real_seconds;
rtc->min = real_minutes;
rtc->control &= ~M48T35_RTC_SET;
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
return retval;
}
#endif
/* Includes for ioc3_init(). */
#include <asm/sn/types.h>
#include <asm/sn/sn0/addrs.h>
......@@ -80,37 +35,6 @@ static int set_rtc_mmss(unsigned long nowtime)
#include <asm/sn/sn0/hubio.h>
#include <asm/pci/bridge.h>
unsigned long read_persistent_clock(void)
{
unsigned int year, month, date, hour, min, sec;
struct m48t35_rtc *rtc;
nasid_t nid;
nid = get_nasid();
rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
IOC3_BYTEBUS_DEV0);
rtc->control |= M48T35_RTC_READ;
sec = rtc->sec;
min = rtc->min;
hour = rtc->hour;
date = rtc->date;
month = rtc->month;
year = rtc->year;
rtc->control &= ~M48T35_RTC_READ;
sec = BCD2BIN(sec);
min = BCD2BIN(min);
hour = BCD2BIN(hour);
date = BCD2BIN(date);
month = BCD2BIN(month);
year = BCD2BIN(year);
year += 1970;
return mktime(year, month, date, hour, min, sec);
}
static void enable_rt_irq(unsigned int irq)
{
}
......@@ -286,6 +210,7 @@ void __cpuinit cpu_time_init(void)
void __cpuinit hub_rtc_init(cnodeid_t cnode)
{
/*
* We only need to initialize the current node.
* If this is not the current node then it is a cpuless
......@@ -301,3 +226,23 @@ void __cpuinit hub_rtc_init(cnodeid_t cnode)
LOCAL_HUB_S(PI_RT_PEND_B, 0);
}
}
static int __init sgi_ip27_rtc_devinit(void)
{
struct resource res;
memset(&res, 0, sizeof(res));
res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
IOC3_BYTEBUS_DEV0);
res.end = res.start + 32767;
res.flags = IORESOURCE_MEM;
return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
&res, 1));
}
/*
* kludge make this a device_initcall after ioc3 resource conflicts
* are resolved
*/
late_initcall(sgi_ip27_rtc_devinit);
......@@ -90,6 +90,22 @@ static __init int sgio2btns_devinit(void)
device_initcall(sgio2btns_devinit);
static struct resource sgio2_cmos_rsrc[] = {
{
.start = 0x70,
.end = 0x71,
.flags = IORESOURCE_IO
}
};
static __init int sgio2_cmos_devinit(void)
{
return IS_ERR(platform_device_register_simple("rtc_cmos", -1,
sgio2_cmos_rsrc, 1));
}
device_initcall(sgio2_cmos_devinit);
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
......@@ -62,11 +62,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
}
#endif
unsigned long read_persistent_clock(void)
{
return mc146818_get_cmos_time();
}
/* An arbitrary time; this can be decreased if reliability looks good */
#define WAIT_MS 10
......
......@@ -352,6 +352,11 @@ config RTC_DRV_DS1216
help
If you say yes here you get support for the Dallas DS1216 RTC chips.
config RTC_DRV_DS1286
tristate "Dallas DS1286"
help
If you say yes here you get support for the Dallas DS1286 RTC chips.
config RTC_DRV_DS1302
tristate "Dallas DS1302"
depends on SH_SECUREEDGE5410
......@@ -405,6 +410,15 @@ config RTC_DRV_M48T86
This driver can also be built as a module. If so, the module
will be called rtc-m48t86.
config RTC_DRV_M48T35
tristate "ST M48T35"
help
If you say Y here you will get support for the
ST M48T35 RTC chip.
This driver can also be built as a module, if so, the module
will be called "rtc-m48t35".
config RTC_DRV_M48T59
tristate "ST M48T59/M48T08/M48T02"
help
......
......@@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o
obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o
obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o
obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
......@@ -36,6 +37,7 @@ obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o
......
/*
* DS1286 Real Time Clock interface for Linux
*
* Copyright (C) 1998, 1999, 2000 Ralf Baechle
* Copyright (C) 2008 Thomas Bogendoerfer
*
* Based on code written by Paul Gortmaker.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/bcd.h>
#include <linux/ds1286.h>
#define DRV_VERSION "1.0"
struct ds1286_priv {
struct rtc_device *rtc;
u32 __iomem *rtcregs;
size_t size;
unsigned long baseaddr;
spinlock_t lock;
};
static inline u8 ds1286_rtc_read(struct ds1286_priv *priv, int reg)
{
return __raw_readl(&priv->rtcregs[reg]) & 0xff;
}
static inline void ds1286_rtc_write(struct ds1286_priv *priv, u8 data, int reg)
{
__raw_writel(data, &priv->rtcregs[reg]);
}
#ifdef CONFIG_RTC_INTF_DEV
static int ds1286_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned long flags;
unsigned char val;
switch (cmd) {
case RTC_AIE_OFF:
/* Mask alarm int. enab. bit */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
val |= RTC_TDM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
break;
case RTC_AIE_ON:
/* Allow alarm interrupts. */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
val &= ~RTC_TDM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
break;
case RTC_WIE_OFF:
/* Mask watchdog int. enab. bit */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
val |= RTC_WAM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
break;
case RTC_WIE_ON:
/* Allow watchdog interrupts. */
spin_lock_irqsave(&priv->lock, flags);
val = ds1286_rtc_read(priv, RTC_CMD);
val &= ~RTC_WAM;
ds1286_rtc_write(priv, val, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
break;
default:
return -ENOIOCTLCMD;
}
return 0;
}
#else
#define ds1286_ioctl NULL
#endif
#ifdef CONFIG_PROC_FS
static int ds1286_proc(struct device *dev, struct seq_file *seq)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char month, cmd, amode;
const char *s;
month = ds1286_rtc_read(priv, RTC_MONTH);
seq_printf(seq,
"oscillator\t: %s\n"
"square_wave\t: %s\n",
(month & RTC_EOSC) ? "disabled" : "enabled",
(month & RTC_ESQW) ? "disabled" : "enabled");
amode = ((ds1286_rtc_read(priv, RTC_MINUTES_ALARM) & 0x80) >> 5) |
((ds1286_rtc_read(priv, RTC_HOURS_ALARM) & 0x80) >> 6) |
((ds1286_rtc_read(priv, RTC_DAY_ALARM) & 0x80) >> 7);
switch (amode) {
case 7:
s = "each minute";
break;
case 3:
s = "minutes match";
break;
case 1:
s = "hours and minutes match";
break;
case 0:
s = "days, hours and minutes match";
break;
default:
s = "invalid";
break;
}
seq_printf(seq, "alarm_mode\t: %s\n", s);
cmd = ds1286_rtc_read(priv, RTC_CMD);
seq_printf(seq,
"alarm_enable\t: %s\n"
"wdog_alarm\t: %s\n"
"alarm_mask\t: %s\n"
"wdog_alarm_mask\t: %s\n"
"interrupt_mode\t: %s\n"
"INTB_mode\t: %s_active\n"
"interrupt_pins\t: %s\n",
(cmd & RTC_TDF) ? "yes" : "no",
(cmd & RTC_WAF) ? "yes" : "no",
(cmd & RTC_TDM) ? "disabled" : "enabled",
(cmd & RTC_WAM) ? "disabled" : "enabled",
(cmd & RTC_PU_LVL) ? "pulse" : "level",
(cmd & RTC_IBH_LO) ? "low" : "high",
(cmd & RTC_IPSW) ? "unswapped" : "swapped");
return 0;
}
#else
#define ds1286_proc NULL
#endif
static int ds1286_read_time(struct device *dev, struct rtc_time *tm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char save_control;
unsigned long flags;
unsigned long uip_watchdog = jiffies;
/*
* read RTC once any update in progress is done. The update
* can take just over 2ms. We wait 10 to 20ms. There is no need to
* to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
* If you need to know *exactly* when a second has started, enable
* periodic update complete interrupts, (via ioctl) and then
* immediately read /dev/rtc which will block until you get the IRQ.
* Once the read clears, read the RTC time (again via ioctl). Easy.
*/
if (ds1286_rtc_read(priv, RTC_CMD) & RTC_TE)
while (time_before(jiffies, uip_watchdog + 2*HZ/100))
barrier();
/*
* Only the values that we read from the RTC are set. We leave
* tm_wday, tm_yday and tm_isdst untouched. Even though the
* RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
* by the RTC when initially set to a non-zero value.
*/
spin_lock_irqsave(&priv->lock, flags);
save_control = ds1286_rtc_read(priv, RTC_CMD);
ds1286_rtc_write(priv, (save_control|RTC_TE), RTC_CMD);
tm->tm_sec = ds1286_rtc_read(priv, RTC_SECONDS);
tm->tm_min = ds1286_rtc_read(priv, RTC_MINUTES);
tm->tm_hour = ds1286_rtc_read(priv, RTC_HOURS) & 0x3f;
tm->tm_mday = ds1286_rtc_read(priv, RTC_DATE);
tm->tm_mon = ds1286_rtc_read(priv, RTC_MONTH) & 0x1f;
tm->tm_year = ds1286_rtc_read(priv, RTC_YEAR);
ds1286_rtc_write(priv, save_control, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon);
tm->tm_year = bcd2bin(tm->tm_year);
/*
* Account for differences between how the RTC uses the values
* and how they are defined in a struct rtc_time;
*/
if (tm->tm_year < 45)
tm->tm_year += 30;
tm->tm_year += 40;
if (tm->tm_year < 70)
tm->tm_year += 100;
tm->tm_mon--;
return rtc_valid_tm(tm);
}
static int ds1286_set_time(struct device *dev, struct rtc_time *tm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char mon, day, hrs, min, sec;
unsigned char save_control;
unsigned int yrs;
unsigned long flags;
yrs = tm->tm_year + 1900;
mon = tm->tm_mon + 1; /* tm_mon starts at zero */
day = tm->tm_mday;
hrs = tm->tm_hour;
min = tm->tm_min;
sec = tm->tm_sec;
if (yrs < 1970)
return -EINVAL;
yrs -= 1940;
if (yrs > 255) /* They are unsigned */
return -EINVAL;
if (yrs >= 100)
yrs -= 100;
sec = bin2bcd(sec);
min = bin2bcd(min);
hrs = bin2bcd(hrs);
day = bin2bcd(day);
mon = bin2bcd(mon);
yrs = bin2bcd(yrs);
spin_lock_irqsave(&priv->lock, flags);
save_control = ds1286_rtc_read(priv, RTC_CMD);
ds1286_rtc_write(priv, (save_control|RTC_TE), RTC_CMD);
ds1286_rtc_write(priv, yrs, RTC_YEAR);
ds1286_rtc_write(priv, mon, RTC_MONTH);
ds1286_rtc_write(priv, day, RTC_DATE);
ds1286_rtc_write(priv, hrs, RTC_HOURS);
ds1286_rtc_write(priv, min, RTC_MINUTES);
ds1286_rtc_write(priv, sec, RTC_SECONDS);
ds1286_rtc_write(priv, 0, RTC_HUNDREDTH_SECOND);
ds1286_rtc_write(priv, save_control, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int ds1286_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char cmd;
unsigned long flags;
/*
* Only the values that we read from the RTC are set. That
* means only tm_wday, tm_hour, tm_min.
*/
spin_lock_irqsave(&priv->lock, flags);
alm->time.tm_min = ds1286_rtc_read(priv, RTC_MINUTES_ALARM) & 0x7f;
alm->time.tm_hour = ds1286_rtc_read(priv, RTC_HOURS_ALARM) & 0x1f;
alm->time.tm_wday = ds1286_rtc_read(priv, RTC_DAY_ALARM) & 0x07;
cmd = ds1286_rtc_read(priv, RTC_CMD);
spin_unlock_irqrestore(&priv->lock, flags);
alm->time.tm_min = bcd2bin(alm->time.tm_min);
alm->time.tm_hour = bcd2bin(alm->time.tm_hour);
alm->time.tm_sec = 0;
return 0;
}
static int ds1286_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct ds1286_priv *priv = dev_get_drvdata(dev);
unsigned char hrs, min, sec;
hrs = alm->time.tm_hour;
min = alm->time.tm_min;
sec = alm->time.tm_sec;
if (hrs >= 24)
hrs = 0xff;
if (min >= 60)
min = 0xff;
if (sec != 0)
return -EINVAL;
min = bin2bcd(min);
hrs = bin2bcd(hrs);
spin_lock(&priv->lock);
ds1286_rtc_write(priv, hrs, RTC_HOURS_ALARM);
ds1286_rtc_write(priv, min, RTC_MINUTES_ALARM);
spin_unlock(&priv->lock);
return 0;
}
static const struct rtc_class_ops ds1286_ops = {
.ioctl = ds1286_ioctl,
.proc = ds1286_proc,
.read_time = ds1286_read_time,
.set_time = ds1286_set_time,
.read_alarm = ds1286_read_alarm,
.set_alarm = ds1286_set_alarm,
};
static int __devinit ds1286_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
struct ds1286_priv *priv;
int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
priv = kzalloc(sizeof(struct ds1286_priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->size = res->end - res->start + 1;
if (!request_mem_region(res->start, priv->size, pdev->name)) {
ret = -EBUSY;
goto out;
}
priv->baseaddr = res->start;
priv->rtcregs = ioremap(priv->baseaddr, priv->size);
if (!priv->rtcregs) {
ret = -ENOMEM;
goto out;
}
spin_lock_init(&priv->lock);
rtc = rtc_device_register("ds1286", &pdev->dev,
&ds1286_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
ret = PTR_ERR(rtc);
goto out;
}
priv->rtc = rtc;
platform_set_drvdata(pdev, priv);
return 0;
out:
if (priv->rtc)
rtc_device_unregister(priv->rtc);
if (priv->rtcregs)
iounmap(priv->rtcregs);
if (priv->baseaddr)
release_mem_region(priv->baseaddr, priv->size);
kfree(priv);
return ret;
}
static int __devexit ds1286_remove(struct platform_device *pdev)
{
struct ds1286_priv *priv = platform_get_drvdata(pdev);
rtc_device_unregister(priv->rtc);
iounmap(priv->rtcregs);
release_mem_region(priv->baseaddr, priv->size);
kfree(priv);
return 0;
}
static struct platform_driver ds1286_platform_driver = {
.driver = {
.name = "rtc-ds1286",
.owner = THIS_MODULE,
},
.probe = ds1286_probe,
.remove = __devexit_p(ds1286_remove),
};
static int __init ds1286_init(void)
{
return platform_driver_register(&ds1286_platform_driver);
}
static void __exit ds1286_exit(void)
{
platform_driver_unregister(&ds1286_platform_driver);
}
MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
MODULE_DESCRIPTION("DS1286 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:rtc-ds1286");
module_init(ds1286_init);
module_exit(ds1286_exit);
/*
* Driver for the SGS-Thomson M48T35 Timekeeper RAM chip
*
* Copyright (C) 2000 Silicon Graphics, Inc.
* Written by Ulf Carlsson (ulfc@engr.sgi.com)
*
* Copyright (C) 2008 Thomas Bogendoerfer
*
* Based on code written by Paul Gortmaker.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/bcd.h>
#define DRV_VERSION "1.0"
struct m48t35_rtc {
u8 pad[0x7ff8]; /* starts at 0x7ff8 */
u8 control;
u8 sec;
u8 min;
u8 hour;
u8 day;
u8 date;
u8 month;
u8 year;
};
#define M48T35_RTC_SET 0x80
#define M48T35_RTC_READ 0x40
struct m48t35_priv {
struct rtc_device *rtc;
struct m48t35_rtc __iomem *reg;
size_t size;
unsigned long baseaddr;
spinlock_t lock;
};
static int m48t35_read_time(struct device *dev, struct rtc_time *tm)
{
struct m48t35_priv *priv = dev_get_drvdata(dev);
u8 control;
/*
* Only the values that we read from the RTC are set. We leave
* tm_wday, tm_yday and tm_isdst untouched. Even though the
* RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
* by the RTC when initially set to a non-zero value.
*/
spin_lock_irq(&priv->lock);
control = readb(&priv->reg->control);
writeb(control | M48T35_RTC_READ, &priv->reg->control);
tm->tm_sec = readb(&priv->reg->sec);
tm->tm_min = readb(&priv->reg->min);
tm->tm_hour = readb(&priv->reg->hour);
tm->tm_mday = readb(&priv->reg->date);
tm->tm_mon = readb(&priv->reg->month);
tm->tm_year = readb(&priv->reg->year);
writeb(control, &priv->reg->control);
spin_unlock_irq(&priv->lock);
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon);
tm->tm_year = bcd2bin(tm->tm_year);
/*
* Account for differences between how the RTC uses the values
* and how they are defined in a struct rtc_time;
*/
tm->tm_year += 70;
if (tm->tm_year <= 69)
tm->tm_year += 100;
tm->tm_mon--;
return rtc_valid_tm(tm);
}
static int m48t35_set_time(struct device *dev, struct rtc_time *tm)
{
struct m48t35_priv *priv = dev_get_drvdata(dev);
unsigned char mon, day, hrs, min, sec;
unsigned int yrs;
u8 control;
yrs = tm->tm_year + 1900;
mon = tm->tm_mon + 1; /* tm_mon starts at zero */
day = tm->tm_mday;
hrs = tm->tm_hour;
min = tm->tm_min;
sec = tm->tm_sec;
if (yrs < 1970)
return -EINVAL;
yrs -= 1970;
if (yrs > 255) /* They are unsigned */
return -EINVAL;
if (yrs > 169)
return -EINVAL;
if (yrs >= 100)
yrs -= 100;
sec = bin2bcd(sec);
min = bin2bcd(min);
hrs = bin2bcd(hrs);
day = bin2bcd(day);
mon = bin2bcd(mon);
yrs = bin2bcd(yrs);
spin_lock_irq(&priv->lock);
control = readb(&priv->reg->control);
writeb(control | M48T35_RTC_SET, &priv->reg->control);
writeb(yrs, &priv->reg->year);
writeb(mon, &priv->reg->month);
writeb(day, &priv->reg->date);
writeb(hrs, &priv->reg->hour);
writeb(min, &priv->reg->min);
writeb(sec, &priv->reg->sec);
writeb(control, &priv->reg->control);
spin_unlock_irq(&priv->lock);
return 0;
}
static const struct rtc_class_ops m48t35_ops = {
.read_time = m48t35_read_time,
.set_time = m48t35_set_time,
};
static int __devinit m48t35_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
struct m48t35_priv *priv;
int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
priv = kzalloc(sizeof(struct m48t35_priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->size = res->end - res->start + 1;
/*
* kludge: remove the #ifndef after ioc3 resource
* conflicts are resolved
*/
#ifndef CONFIG_SGI_IP27
if (!request_mem_region(res->start, priv->size, pdev->name)) {
ret = -EBUSY;
goto out;
}
#endif
priv->baseaddr = res->start;
priv->reg = ioremap(priv->baseaddr, priv->size);
if (!priv->reg) {
ret = -ENOMEM;
goto out;
}
spin_lock_init(&priv->lock);
rtc = rtc_device_register("m48t35", &pdev->dev,
&m48t35_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
ret = PTR_ERR(rtc);
goto out;
}
priv->rtc = rtc;
platform_set_drvdata(pdev, priv);
return 0;
out:
if (priv->rtc)
rtc_device_unregister(priv->rtc);
if (priv->reg)
iounmap(priv->reg);
if (priv->baseaddr)
release_mem_region(priv->baseaddr, priv->size);
kfree(priv);
return ret;
}
static int __devexit m48t35_remove(struct platform_device *pdev)
{
struct m48t35_priv *priv = platform_get_drvdata(pdev);
rtc_device_unregister(priv->rtc);
iounmap(priv->reg);
#ifndef CONFIG_SGI_IP27
release_mem_region(priv->baseaddr, priv->size);
#endif
kfree(priv);
return 0;
}
static struct platform_driver m48t35_platform_driver = {
.driver = {
.name = "rtc-m48t35",
.owner = THIS_MODULE,
},
.probe = m48t35_probe,
.remove = __devexit_p(m48t35_remove),
};
static int __init m48t35_init(void)
{
return platform_driver_register(&m48t35_platform_driver);
}
static void __exit m48t35_exit(void)
{
platform_driver_unregister(&m48t35_platform_driver);
}
MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
MODULE_DESCRIPTION("M48T35 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:rtc-m48t35");
module_init(m48t35_init);
module_exit(m48t35_exit);
......@@ -8,8 +8,6 @@
#ifndef __LINUX_DS1286_H
#define __LINUX_DS1286_H
#include <asm/ds1286.h>
/**********************************************************************
* register summary
**********************************************************************/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册