提交 0462e2bb 编写于 作者: P Peter Meerwald 提交者: Greg Kroah-Hartman

staging: iio: fix access to hmc5843 private data

i2c_get_clientdata(client) points to iio_dev, not hmc5843_data; fixes
issue similar to 62d2feb9Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 5cdd9b75
......@@ -250,7 +250,8 @@ static IIO_DEVICE_ATTR(operating_mode,
static s32 hmc5843_set_meas_conf(struct i2c_client *client,
u8 meas_conf)
{
struct hmc5843_data *data = i2c_get_clientdata(client);
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct hmc5843_data *data = iio_priv(indio_dev);
u8 reg_val;
reg_val = (meas_conf & MEAS_CONF_MASK) | (data->rate << RATE_OFFSET);
return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
......@@ -272,7 +273,7 @@ static ssize_t hmc5843_set_measurement_configuration(struct device *dev,
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
struct hmc5843_data *data = i2c_get_clientdata(client);
struct hmc5843_data *data = iio_priv(indio_dev);
unsigned long meas_conf = 0;
int error = strict_strtoul(buf, 10, &meas_conf);
if (error)
......@@ -314,7 +315,8 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("0.5 1 2 5 10 20 50");
static s32 hmc5843_set_rate(struct i2c_client *client,
u8 rate)
{
struct hmc5843_data *data = i2c_get_clientdata(client);
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct hmc5843_data *data = iio_priv(indio_dev);
u8 reg_val;
reg_val = (data->meas_conf) | (rate << RATE_OFFSET);
......@@ -600,8 +602,12 @@ static int hmc5843_suspend(struct device *dev)
static int hmc5843_resume(struct device *dev)
{
struct hmc5843_data *data = i2c_get_clientdata(to_i2c_client(dev));
hmc5843_configure(to_i2c_client(dev), data->operating_mode);
struct i2c_client *client = to_i2c_client(dev);
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct hmc5843_data *data = iio_priv(indio_dev);
hmc5843_configure(client, data->operating_mode);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册