未验证 提交 03bbf9f5 编写于 作者: K Kuninori Morimoto 提交者: Mark Brown

ASoC: ak4613: call dummy write for PW_MGMT1/3 when Playback

Power Down Release Command (PMVR, PMDAC, RSTN, PMDA1-PMDA6)
which are located on PW_MGMT1 / PW_MGMT3 register must be
write again after at least 5 LRCK cycle or later on each command.
Otherwise, Playback volume will be 0dB.
Basically, it should be

        1.   PowerDownRelease by Power Management1 <= call 1.x after 5LRCK
        1.x  Dummy write      to Power Management1
        2.   PowerDownRelease by Power Management3 <= call 2.x after 5LRCK
        2.x  Dummy write      to Power Management3

To avoid too many dummy write, this patch is merging these.

        1.   PowerDownRelease by Power Management1
        2.   PowerDownRelease by Power Management3   <= call after 5LRCK
        2.x  Dummy write      to Power Management1/3 <= merge dummy write

This patch adds dummy write when Playback Start timing.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 4fbd8d19
......@@ -15,6 +15,7 @@
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/of_device.h>
......@@ -95,6 +96,9 @@ struct ak4613_priv {
struct mutex lock;
const struct ak4613_interface *iface;
struct snd_pcm_hw_constraint_list constraint;
struct work_struct dummy_write_work;
struct snd_soc_component *component;
unsigned int rate;
unsigned int sysclk;
unsigned int fmt;
......@@ -392,6 +396,7 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
default:
return -EINVAL;
}
priv->rate = rate;
/*
* FIXME
......@@ -467,11 +472,83 @@ static int ak4613_set_bias_level(struct snd_soc_codec *codec,
return 0;
}
static void ak4613_dummy_write(struct work_struct *work)
{
struct ak4613_priv *priv = container_of(work,
struct ak4613_priv,
dummy_write_work);
struct snd_soc_component *component = priv->component;
unsigned int mgmt1;
unsigned int mgmt3;
/*
* PW_MGMT1 / PW_MGMT3 needs dummy write at least after 5 LR clocks
*
* Note
*
* To avoid extra delay, we want to avoid preemption here,
* but we can't. Because it uses I2C access which is using IRQ
* and sleep. Thus, delay might be more than 5 LR clocks
* see also
* ak4613_dai_trigger()
*/
udelay(5000000 / priv->rate);
snd_soc_component_read(component, PW_MGMT1, &mgmt1);
snd_soc_component_read(component, PW_MGMT3, &mgmt3);
snd_soc_component_write(component, PW_MGMT1, mgmt1);
snd_soc_component_write(component, PW_MGMT3, mgmt3);
}
static int ak4613_dai_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
struct ak4613_priv *priv = snd_soc_codec_get_drvdata(codec);
/*
* FIXME
*
* PW_MGMT1 / PW_MGMT3 needs dummy write at least after 5 LR clocks
* from Power Down Release. Otherwise, Playback volume will be 0dB.
* To avoid complex multiple delay/dummy_write method from
* ak4613_set_bias_level() / SND_SOC_DAPM_DAC_E("DACx", ...),
* call it once here.
*
* But, unfortunately, we can't "write" here because here is atomic
* context (It uses I2C access for writing).
* Thus, use schedule_work() to switching to normal context
* immediately.
*
* Note
*
* Calling ak4613_dummy_write() function might be delayed.
* In such case, ak4613 volume might be temporarily 0dB when
* beggining of playback.
* see also
* ak4613_dummy_write()
*/
if ((cmd != SNDRV_PCM_TRIGGER_START) &&
(cmd != SNDRV_PCM_TRIGGER_RESUME))
return 0;
if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
return 0;
priv->component = &codec->component;
schedule_work(&priv->dummy_write_work);
return 0;
}
static const struct snd_soc_dai_ops ak4613_dai_ops = {
.startup = ak4613_dai_startup,
.shutdown = ak4613_dai_shutdown,
.set_sysclk = ak4613_dai_set_sysclk,
.set_fmt = ak4613_dai_set_fmt,
.trigger = ak4613_dai_trigger,
.hw_params = ak4613_dai_hw_params,
};
......@@ -590,6 +667,7 @@ static int ak4613_i2c_probe(struct i2c_client *i2c,
priv->iface = NULL;
priv->cnt = 0;
priv->sysclk = 0;
INIT_WORK(&priv->dummy_write_work, ak4613_dummy_write);
mutex_init(&priv->lock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册