Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 03b5357c 编写于 作者: L Linus Walleij
浏览文件
操作

dma: coh901318: push definitions into driver 

Move everything in the header file that is not used in both
the main driver and the LLI portions into the driver, including
register definitions and such.
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 2b9277ad
隐藏空白更改
内联 并排
Showing with 209 addition and 212 deletion
drivers/dma/coh901318.c
浏览文件 @ 03b5357c
......@@ -27,6 +27,214 @@
#include "coh901318_lli.h"
#include "dmaengine.h"
#define COH901318_MOD32_MASK (0x1F)
#define COH901318_WORD_MASK (0xFFFFFFFF)
/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
#define COH901318_INT_STATUS1 (0x0000)
#define COH901318_INT_STATUS2 (0x0004)
/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
#define COH901318_TC_INT_STATUS1 (0x0008)
#define COH901318_TC_INT_STATUS2 (0x000C)
/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
#define COH901318_TC_INT_CLEAR1 (0x0010)
#define COH901318_TC_INT_CLEAR2 (0x0014)
/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
#define COH901318_RAW_TC_INT_STATUS1 (0x0018)
#define COH901318_RAW_TC_INT_STATUS2 (0x001C)
/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
#define COH901318_BE_INT_STATUS1 (0x0020)
#define COH901318_BE_INT_STATUS2 (0x0024)
/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
#define COH901318_BE_INT_CLEAR1 (0x0028)
#define COH901318_BE_INT_CLEAR2 (0x002C)
/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
#define COH901318_RAW_BE_INT_STATUS1 (0x0030)
#define COH901318_RAW_BE_INT_STATUS2 (0x0034)
/*
* CX_CFG - Channel Configuration Registers 32bit (R/W)
*/
#define COH901318_CX_CFG (0x0100)
#define COH901318_CX_CFG_SPACING (0x04)
/* Channel enable activates tha dma job */
#define COH901318_CX_CFG_CH_ENABLE (0x00000001)
#define COH901318_CX_CFG_CH_DISABLE (0x00000000)
/* Request Mode */
#define COH901318_CX_CFG_RM_MASK (0x00000006)
#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1)
#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1)
#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1)
#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1)
#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1)
/* Linked channel request field. RM must == 11 */
#define COH901318_CX_CFG_LCRF_SHIFT 3
#define COH901318_CX_CFG_LCRF_MASK (0x000001F8)
#define COH901318_CX_CFG_LCR_DISABLE (0x00000000)
/* Terminal Counter Interrupt Request Mask */
#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200)
#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000)
/* Bus Error interrupt Mask */
#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400)
#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000)
/*
* CX_STAT - Channel Status Registers 32bit (R/-)
*/
#define COH901318_CX_STAT (0x0200)
#define COH901318_CX_STAT_SPACING (0x04)
#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008)
#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004)
#define COH901318_CX_STAT_ACTIVE (0x00000002)
#define COH901318_CX_STAT_ENABLED (0x00000001)
/*
* CX_CTRL - Channel Control Registers 32bit (R/W)
*/
#define COH901318_CX_CTRL (0x0400)
#define COH901318_CX_CTRL_SPACING (0x10)
/* Transfer Count Enable */
#define COH901318_CX_CTRL_TC_ENABLE (0x00001000)
#define COH901318_CX_CTRL_TC_DISABLE (0x00000000)
/* Transfer Count Value 0 - 4095 */
#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF)
/* Burst count */
#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000)
#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13)
/* Source bus size */
#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000)
#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16)
#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16)
#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16)
/* Source address increment */
#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000)
#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000)
/* Destination Bus Size */
#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000)
#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19)
#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19)
#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19)
/* Destination address increment */
#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000)
#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000)
/* Master Mode (Master2 is only connected to MSL) */
#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000)
#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22)
#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22)
#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22)
#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22)
/* Terminal Count flag to PER enable */
#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000)
#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000)
/* Terminal Count flags to CPU enable */
#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000)
#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000)
/* Hand shake to peripheral */
#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000)
#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000)
#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000)
#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000)
/* DMA mode */
#define COH901318_CX_CTRL_DDMA_MASK (0x30000000)
#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28)
#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28)
#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28)
/* Primary Request Data Destination */
#define COH901318_CX_CTRL_PRDD_MASK (0x40000000)
#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30)
#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30)
/*
* CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
*/
#define COH901318_CX_SRC_ADDR (0x0404)
#define COH901318_CX_SRC_ADDR_SPACING (0x10)
/*
* CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
*/
#define COH901318_CX_DST_ADDR (0x0408)
#define COH901318_CX_DST_ADDR_SPACING (0x10)
/*
* CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
*/
#define COH901318_CX_LNK_ADDR (0x040C)
#define COH901318_CX_LNK_ADDR_SPACING (0x10)
#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001)
/**
* struct coh901318_params - parameters for DMAC configuration
* @config: DMA config register
* @ctrl_lli_last: DMA control register for the last lli in the list
* @ctrl_lli: DMA control register for an lli
* @ctrl_lli_chained: DMA control register for a chained lli
*/
struct coh901318_params {
u32 config;
u32 ctrl_lli_last;
u32 ctrl_lli;
u32 ctrl_lli_chained;
};
/**
* struct coh_dma_channel - dma channel base
* @name: ascii name of dma channel
* @number: channel id number
* @desc_nbr_max: number of preallocated descriptors
* @priority_high: prio of channel, 0 low otherwise high.
* @param: configuration parameters
*/
struct coh_dma_channel {
const char name[32];
const int number;
const int desc_nbr_max;
const int priority_high;
const struct coh901318_params param;
};
/**
* dma_access_memory_state_t - register dma for memory access
*
* @dev: The dma device
* @active: 1 means dma intends to access memory
* 0 means dma wont access memory
*/
typedef void (*dma_access_memory_state_t)(struct device *dev,
bool active);
/**
* struct powersave - DMA power save structure
* @lock: lock protecting data in this struct
* @started_channels: bit mask indicating active dma channels
*/
struct powersave {
spinlock_t lock;
u64 started_channels;
};
/**
* struct coh901318_platform - platform arch structure
* @chans_slave: specifying dma slave channels
* @chans_memcpy: specifying dma memcpy channels
* @access_memory_state: requesting DMA memory access (on / off)
* @chan_conf: dma channel configurations
* @max_channels: max number of dma chanenls
*/
struct coh901318_platform {
const int *chans_slave;
const int *chans_memcpy;
const dma_access_memory_state_t access_memory_state;
const struct coh_dma_channel *chan_conf;
const int max_channels;
};
/* points out all dma slave channels.
* Syntax is [A1, B1, A2, B2, .... ,-1,-1]
* Select all channels from A to B, end of list is marked with -1,-1
......
drivers/dma/coh901318.h
浏览文件 @ 03b5357c
......@@ -8,9 +8,6 @@
#ifndef COH901318_H
#define COH901318_H
#include <linux/device.h>
#include <linux/dmaengine.h>
#define MAX_DMA_PACKET_SIZE_SHIFT 11
#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
......@@ -32,214 +29,5 @@ struct coh901318_lli {
void *virt_link_addr;
dma_addr_t phy_this;
};
/**
* struct coh901318_params - parameters for DMAC configuration
* @config: DMA config register
* @ctrl_lli_last: DMA control register for the last lli in the list
* @ctrl_lli: DMA control register for an lli
* @ctrl_lli_chained: DMA control register for a chained lli
*/
struct coh901318_params {
u32 config;
u32 ctrl_lli_last;
u32 ctrl_lli;
u32 ctrl_lli_chained;
};
/**
* struct coh_dma_channel - dma channel base
* @name: ascii name of dma channel
* @number: channel id number
* @desc_nbr_max: number of preallocated descriptors
* @priority_high: prio of channel, 0 low otherwise high.
* @param: configuration parameters
*/
struct coh_dma_channel {
const char name[32];
const int number;
const int desc_nbr_max;
const int priority_high;
const struct coh901318_params param;
};
/**
* dma_access_memory_state_t - register dma for memory access
*
* @dev: The dma device
* @active: 1 means dma intends to access memory
* 0 means dma wont access memory
*/
typedef void (*dma_access_memory_state_t)(struct device *dev,
bool active);
/**
* struct powersave - DMA power save structure
* @lock: lock protecting data in this struct
* @started_channels: bit mask indicating active dma channels
*/
struct powersave {
spinlock_t lock;
u64 started_channels;
};
/**
* struct coh901318_platform - platform arch structure
* @chans_slave: specifying dma slave channels
* @chans_memcpy: specifying dma memcpy channels
* @access_memory_state: requesting DMA memory access (on / off)
* @chan_conf: dma channel configurations
* @max_channels: max number of dma chanenls
*/
struct coh901318_platform {
const int *chans_slave;
const int *chans_memcpy;
const dma_access_memory_state_t access_memory_state;
const struct coh_dma_channel *chan_conf;
const int max_channels;
};
/*
* DMA Controller - this access the static mappings of the coh901318 dma.
*
*/
#define COH901318_MOD32_MASK (0x1F)
#define COH901318_WORD_MASK (0xFFFFFFFF)
/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
#define COH901318_INT_STATUS1 (0x0000)
#define COH901318_INT_STATUS2 (0x0004)
/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
#define COH901318_TC_INT_STATUS1 (0x0008)
#define COH901318_TC_INT_STATUS2 (0x000C)
/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
#define COH901318_TC_INT_CLEAR1 (0x0010)
#define COH901318_TC_INT_CLEAR2 (0x0014)
/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
#define COH901318_RAW_TC_INT_STATUS1 (0x0018)
#define COH901318_RAW_TC_INT_STATUS2 (0x001C)
/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
#define COH901318_BE_INT_STATUS1 (0x0020)
#define COH901318_BE_INT_STATUS2 (0x0024)
/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
#define COH901318_BE_INT_CLEAR1 (0x0028)
#define COH901318_BE_INT_CLEAR2 (0x002C)
/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
#define COH901318_RAW_BE_INT_STATUS1 (0x0030)
#define COH901318_RAW_BE_INT_STATUS2 (0x0034)
/*
* CX_CFG - Channel Configuration Registers 32bit (R/W)
*/
#define COH901318_CX_CFG (0x0100)
#define COH901318_CX_CFG_SPACING (0x04)
/* Channel enable activates tha dma job */
#define COH901318_CX_CFG_CH_ENABLE (0x00000001)
#define COH901318_CX_CFG_CH_DISABLE (0x00000000)
/* Request Mode */
#define COH901318_CX_CFG_RM_MASK (0x00000006)
#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1)
#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1)
#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1)
#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1)
#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1)
/* Linked channel request field. RM must == 11 */
#define COH901318_CX_CFG_LCRF_SHIFT 3
#define COH901318_CX_CFG_LCRF_MASK (0x000001F8)
#define COH901318_CX_CFG_LCR_DISABLE (0x00000000)
/* Terminal Counter Interrupt Request Mask */
#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200)
#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000)
/* Bus Error interrupt Mask */
#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400)
#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000)
/*
* CX_STAT - Channel Status Registers 32bit (R/-)
*/
#define COH901318_CX_STAT (0x0200)
#define COH901318_CX_STAT_SPACING (0x04)
#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008)
#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004)
#define COH901318_CX_STAT_ACTIVE (0x00000002)
#define COH901318_CX_STAT_ENABLED (0x00000001)
/*
* CX_CTRL - Channel Control Registers 32bit (R/W)
*/
#define COH901318_CX_CTRL (0x0400)
#define COH901318_CX_CTRL_SPACING (0x10)
/* Transfer Count Enable */
#define COH901318_CX_CTRL_TC_ENABLE (0x00001000)
#define COH901318_CX_CTRL_TC_DISABLE (0x00000000)
/* Transfer Count Value 0 - 4095 */
#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF)
/* Burst count */
#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000)
#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13)
#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13)
/* Source bus size */
#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000)
#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16)
#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16)
#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16)
/* Source address increment */
#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000)
#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000)
/* Destination Bus Size */
#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000)
#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19)
#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19)
#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19)
/* Destination address increment */
#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000)
#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000)
/* Master Mode (Master2 is only connected to MSL) */
#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000)
#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22)
#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22)
#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22)
#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22)
/* Terminal Count flag to PER enable */
#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000)
#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000)
/* Terminal Count flags to CPU enable */
#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000)
#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000)
/* Hand shake to peripheral */
#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000)
#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000)
#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000)
#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000)
/* DMA mode */
#define COH901318_CX_CTRL_DDMA_MASK (0x30000000)
#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28)
#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28)
#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28)
/* Primary Request Data Destination */
#define COH901318_CX_CTRL_PRDD_MASK (0x40000000)
#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30)
#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30)
/*
* CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
*/
#define COH901318_CX_SRC_ADDR (0x0404)
#define COH901318_CX_SRC_ADDR_SPACING (0x10)
/*
* CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
*/
#define COH901318_CX_DST_ADDR (0x0408)
#define COH901318_CX_DST_ADDR_SPACING (0x10)
/*
* CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
*/
#define COH901318_CX_LNK_ADDR (0x040C)
#define COH901318_CX_LNK_ADDR_SPACING (0x10)
#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001)
#endif /* COH901318_H */
drivers/dma/coh901318_lli.c
浏览文件 @ 03b5357c
......@@ -11,6 +11,7 @@
#include <linux/memory.h>
#include <linux/gfp.h>
#include <linux/dmapool.h>
#include <linux/dmaengine.h>
#include "coh901318.h"
#include "coh901318_lli.h"
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或