Fix file references in Kconfig files

This patch fixes file references to moved or deleted files
outside of Documentation/.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

arch/cris/Kconfig

@@ -282,8 +282,8 @@ config ETRAX_RTC
 	  Enables drivers for the Real-Time Clock battery-backed chips on
 	  some products. The kernel reads the time when booting, and
 	  the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
-	  rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
-	  device.  You can check the time with cat /proc/rtc, but
+	  rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
+	  /dev/rtc device.  You can check the time with cat /proc/rtc, but
 	  normal time reading should be done using libc function time and
 	  friends.
 

arch/cris/arch-v10/Kconfig

@@ -24,8 +24,8 @@ config ETRAX_PA_LEDS
 	help
 	  The ETRAX network driver is responsible for flashing LED's when
 	  packets arrive and are sent.  It uses macros defined in
-	  <file:include/asm-cris/io.h>, and those macros are defined after what
-	  YOU choose in this option.  The actual bits used are configured
+	  <file:arch/cris/include/asm/io.h>, and those macros are defined after
+	  what YOU choose in this option.  The actual bits used are configured
 	  separately.  Select this if the LEDs are on port PA.  Some products
 	  put the leds on PB or a memory-mapped latch (CSP0) instead.
 
@@ -34,8 +34,8 @@ config ETRAX_PB_LEDS
 	help
 	  The ETRAX network driver is responsible for flashing LED's when
 	  packets arrive and are sent.  It uses macros defined in
-	  <file:include/asm-cris/io.h>, and those macros are defined after what
-	  YOU choose in this option.  The actual bits used are configured
+	  <file:arch/cris/include/asm/io.h>, and those macros are defined after
+	  what YOU choose in this option.  The actual bits used are configured
 	  separately.  Select this if the LEDs are on port PB.  Some products
 	  put the leds on PA or a memory-mapped latch (CSP0) instead.
 
@@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS
 	help
 	  The ETRAX network driver is responsible for flashing LED's when
 	  packets arrive and are sent. It uses macros defined in
-	  <file:include/asm-cris/io.h>, and those macros are defined after what
-	  YOU choose in this option.  The actual bits used are configured
+	  <file:arch/cris/include/asm/io.h>, and those macros are defined after
+	  what YOU choose in this option.  The actual bits used are configured
 	  separately.  Select this if the LEDs are on a memory-mapped latch
 	  using chip select CSP0, this is mapped at 0x90000000.
 	  Some products put the leds on PA or PB instead.

drivers/net/irda/Kconfig

@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
 	  M here. Some information is contained in the comments
-	  at the top of <file:drivers/net/irda/old_belkin.c>.
+	  at the top of <file:drivers/net/irda/old_belkin-sir.c>.
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"