提交 032b8ea5 编写于 作者: T Tomi Valkeinen

OMAP: DSS2: HDMI: split hdmi_core_ddc_edid

Split the DDC initialization off from hdmi_core_ddc_edid() into a
separate function hdmi_core_ddc_init(). This cleans up the
implementation.

Cc: Mythri P K <mythripk@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
上级 2ea51fef
......@@ -264,92 +264,105 @@ void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data)
hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
}
static int hdmi_core_ddc_edid(struct hdmi_ip_data *ip_data,
u8 *pedid, int ext)
static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data)
{
u32 i, j;
char checksum = 0;
u32 offset = 0;
void __iomem *core_sys_base = hdmi_core_sys_base(ip_data);
void __iomem *base = hdmi_core_sys_base(ip_data);
/* Turn on CLK for DDC */
REG_FLD_MOD(hdmi_av_base(ip_data), HDMI_CORE_AV_DPD, 0x7, 2, 0);
REG_FLD_MOD(base, HDMI_CORE_AV_DPD, 0x7, 2, 0);
/* IN_PROG */
if (REG_GET(base, HDMI_CORE_DDC_STATUS, 4, 4) == 1) {
/* Abort transaction */
REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0xf, 3, 0);
/* IN_PROG */
if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
4, 4, 0) != 0) {
DSSERR("Timeout aborting DDC transaction\n");
return -ETIMEDOUT;
}
}
/*
* SW HACK : Without the Delay DDC(i2c bus) reads 0 values /
* right shifted values( The behavior is not consistent and seen only
* with some TV's)
*/
usleep_range(800, 1000);
/* Clk SCL Devices */
REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0xA, 3, 0);
/* HDMI_CORE_DDC_STATUS_IN_PROG */
if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
4, 4, 0) != 0) {
DSSERR("Timeout starting SCL clock\n");
return -ETIMEDOUT;
}
if (!ext) {
/* Clk SCL Devices */
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_CMD, 0xA, 3, 0);
/* Clear FIFO */
REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x9, 3, 0);
/* HDMI_CORE_DDC_STATUS_IN_PROG */
if (hdmi_wait_for_bit_change(core_sys_base,
HDMI_CORE_DDC_STATUS, 4, 4, 0) != 0) {
pr_err("Failed to program DDC\n");
return -ETIMEDOUT;
}
/* HDMI_CORE_DDC_STATUS_IN_PROG */
if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
4, 4, 0) != 0) {
DSSERR("Timeout clearing DDC fifo\n");
return -ETIMEDOUT;
}
/* Clear FIFO */
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_CMD, 0x9, 3, 0);
return 0;
}
/* HDMI_CORE_DDC_STATUS_IN_PROG */
if (hdmi_wait_for_bit_change(core_sys_base,
HDMI_CORE_DDC_STATUS, 4, 4, 0) != 0) {
pr_err("Failed to program DDC\n");
return -ETIMEDOUT;
}
static int hdmi_core_ddc_edid(struct hdmi_ip_data *ip_data,
u8 *pedid, int ext)
{
void __iomem *base = hdmi_core_sys_base(ip_data);
u32 i, j;
char checksum = 0;
u32 offset = 0;
} else {
if (ext % 2 != 0)
offset = 0x80;
/* HDMI_CORE_DDC_STATUS_IN_PROG */
if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
4, 4, 0) != 0) {
DSSERR("Timeout waiting DDC to be ready\n");
return -ETIMEDOUT;
}
if (ext % 2 != 0)
offset = 0x80;
/* Load Segment Address Register */
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_SEGM, ext/2, 7, 0);
REG_FLD_MOD(base, HDMI_CORE_DDC_SEGM, ext / 2, 7, 0);
/* Load Slave Address Register */
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_ADDR, 0xA0 >> 1, 7, 1);
REG_FLD_MOD(base, HDMI_CORE_DDC_ADDR, 0xA0 >> 1, 7, 1);
/* Load Offset Address Register */
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_OFFSET, offset, 7, 0);
REG_FLD_MOD(base, HDMI_CORE_DDC_OFFSET, offset, 7, 0);
/* Load Byte Count */
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_COUNT1, 0x80, 7, 0);
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_COUNT2, 0x0, 1, 0);
REG_FLD_MOD(base, HDMI_CORE_DDC_COUNT1, 0x80, 7, 0);
REG_FLD_MOD(base, HDMI_CORE_DDC_COUNT2, 0x0, 1, 0);
/* Set DDC_CMD */
if (ext)
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_CMD, 0x4, 3, 0);
REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x4, 3, 0);
else
REG_FLD_MOD(core_sys_base, HDMI_CORE_DDC_CMD, 0x2, 3, 0);
REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x2, 3, 0);
/* HDMI_CORE_DDC_STATUS_BUS_LOW */
if (REG_GET(core_sys_base,
HDMI_CORE_DDC_STATUS, 6, 6) == 1) {
if (REG_GET(base, HDMI_CORE_DDC_STATUS, 6, 6) == 1) {
pr_err("I2C Bus Low?\n");
return -EIO;
}
/* HDMI_CORE_DDC_STATUS_NO_ACK */
if (REG_GET(core_sys_base,
HDMI_CORE_DDC_STATUS, 5, 5) == 1) {
if (REG_GET(base, HDMI_CORE_DDC_STATUS, 5, 5) == 1) {
pr_err("I2C No Ack\n");
return -EIO;
}
i = ext * 128;
j = 0;
while (((REG_GET(core_sys_base, HDMI_CORE_DDC_STATUS, 4, 4) == 1) ||
(REG_GET(core_sys_base,
HDMI_CORE_DDC_STATUS, 2, 2) == 0)) && j < 128) {
while (((REG_GET(base, HDMI_CORE_DDC_STATUS, 4, 4) == 1) ||
(REG_GET(base, HDMI_CORE_DDC_STATUS, 2, 2) == 0)) &&
j < 128) {
if (REG_GET(core_sys_base, HDMI_CORE_DDC_STATUS, 2, 2) == 0) {
if (REG_GET(base, HDMI_CORE_DDC_STATUS, 2, 2) == 0) {
/* FIFO not empty */
pedid[i++] = REG_GET(core_sys_base,
HDMI_CORE_DDC_DATA, 7, 0);
pedid[i++] = REG_GET(base, HDMI_CORE_DDC_DATA, 7, 0);
j++;
}
}
......@@ -372,6 +385,10 @@ int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data,
int max_ext_blocks = (max_length / 128) - 1;
int len;
r = hdmi_core_ddc_init(ip_data);
if (r)
return r;
r = hdmi_core_ddc_edid(ip_data, pedid, 0);
if (r)
return r;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册