提交 02d04254 编写于 作者: H Hans de Goede 提交者: Dmitry Torokhov

Input: alps - use struct input_mt_pos to track coordinates

This is a preparation patch for switching the DIY mt handling to using
input_mt_assign_slots && input_mt_sync_frame.

struct alps_fields is quite large, so while making changes to almost all uses
of it lets put it in our priv data instead of on the stack.

Having it in our priv data also allows using it directly for storing values
which need to be cached, rather then having separate x, y, z, fingers, etc.
copies in our priv data.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
上级 28835f45
......@@ -282,11 +282,10 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
*
* The bitmaps don't have enough data to track fingers, so this function
* only generates points representing a bounding box of at most two contacts.
* These two points are returned in x1, y1, x2, and y2.
* These two points are returned in fields->mt.
*/
static void alps_process_bitmap_dolphin(struct alps_data *priv,
struct alps_fields *fields,
int *x1, int *y1, int *x2, int *y2)
struct alps_fields *fields)
{
int box_middle_x, box_middle_y;
unsigned int x_map, y_map;
......@@ -309,8 +308,6 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv,
if (x_msb > priv->x_bits || y_msb > priv->y_bits)
return;
*x1 = *y1 = *x2 = *y2 = 0;
if (fields->fingers > 1) {
start_bit = priv->x_bits - x_msb;
end_bit = priv->x_bits - x_lsb;
......@@ -321,10 +318,9 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv,
end_bit = y_msb - 1;
box_middle_y = (priv->y_max * (start_bit + end_bit)) /
(2 * (priv->y_bits - 1));
*x1 = fields->x;
*y1 = fields->y;
*x2 = 2 * box_middle_x - *x1;
*y2 = 2 * box_middle_y - *y1;
fields->mt[0] = fields->st;
fields->mt[1].x = 2 * box_middle_x - fields->mt[0].x;
fields->mt[1].y = 2 * box_middle_y - fields->mt[0].y;
}
}
......@@ -361,24 +357,21 @@ static void alps_get_bitmap_points(unsigned int map,
*
* The bitmaps don't have enough data to track fingers, so this function
* only generates points representing a bounding box of all contacts.
* These points are returned in x1, y1, x2, and y2 when the return value
* These points are returned in fields->mt when the return value
* is greater than 0.
*/
static int alps_process_bitmap(struct alps_data *priv,
unsigned int x_map, unsigned int y_map,
int *x1, int *y1, int *x2, int *y2)
struct alps_fields *fields)
{
int i, fingers_x = 0, fingers_y = 0, fingers;
struct alps_bitmap_point x_low = {0,}, x_high = {0,};
struct alps_bitmap_point y_low = {0,}, y_high = {0,};
if (!x_map || !y_map)
if (!fields->x_map || !fields->y_map)
return 0;
*x1 = *y1 = *x2 = *y2 = 0;
alps_get_bitmap_points(x_map, &x_low, &x_high, &fingers_x);
alps_get_bitmap_points(y_map, &y_low, &y_high, &fingers_y);
alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x);
alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y);
/*
* Fingers can overlap, so we use the maximum count of fingers
......@@ -403,22 +396,24 @@ static int alps_process_bitmap(struct alps_data *priv,
y_high.num_bits = max(i, 1);
}
*x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
(2 * (priv->x_bits - 1));
*y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
(2 * (priv->y_bits - 1));
fields->mt[0].x =
(priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
(2 * (priv->x_bits - 1));
fields->mt[0].y =
(priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
(2 * (priv->y_bits - 1));
*x2 = (priv->x_max *
(2 * x_high.start_bit + x_high.num_bits - 1)) /
(2 * (priv->x_bits - 1));
*y2 = (priv->y_max *
(2 * y_high.start_bit + y_high.num_bits - 1)) /
(2 * (priv->y_bits - 1));
fields->mt[1].x =
(priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
(2 * (priv->x_bits - 1));
fields->mt[1].y =
(priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
(2 * (priv->y_bits - 1));
/* y-bitmap order is reversed, except on rushmore */
if (!(priv->flags & ALPS_IS_RUSHMORE)) {
*y1 = priv->y_max - *y1;
*y2 = priv->y_max - *y2;
fields->mt[0].y = priv->y_max - fields->mt[0].y;
fields->mt[1].y = priv->y_max - fields->mt[1].y;
}
return fingers;
......@@ -435,11 +430,14 @@ static void alps_set_slot(struct input_dev *dev, int slot, bool active,
}
}
static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
int x1, int y1, int x2, int y2)
static void alps_report_semi_mt_data(struct psmouse *psmouse, int num_fingers)
{
alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
struct alps_data *priv = psmouse->private;
struct input_dev *dev = psmouse->dev;
struct alps_fields *f = &priv->f;
alps_set_slot(dev, 0, num_fingers != 0, f->mt[0].x, f->mt[0].y);
alps_set_slot(dev, 1, num_fingers == 2, f->mt[1].x, f->mt[1].y);
}
static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
......@@ -527,10 +525,10 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
((p[2] & 0x7f) << 1) |
(p[4] & 0x01);
f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
((p[0] & 0x30) >> 4);
f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
f->z = p[5] & 0x7f;
f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
f->pressure = p[5] & 0x7f;
alps_decode_buttons_v3(f, p);
}
......@@ -557,9 +555,9 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
f->is_mp = !!(p[0] & 0x20);
if (!f->is_mp) {
f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f;
alps_decode_buttons_v3(f, p);
} else {
f->fingers = ((p[0] & 0x6) >> 1 |
......@@ -588,10 +586,12 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
int x1 = 0, y1 = 0, x2 = 0, y2 = 0, fingers = 0;
struct alps_fields f = {0};
struct alps_fields *f = &priv->f;
int fingers = 0;
memset(f, 0, sizeof(*f));
priv->decode_fields(&f, packet, psmouse);
priv->decode_fields(f, packet, psmouse);
/*
* There's no single feature of touchpad position and bitmap packets
......@@ -606,16 +606,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
* packet. Check for this, and when it happens process the
* position packet as usual.
*/
if (f.is_mp) {
fingers = f.fingers;
if (f->is_mp) {
fingers = f->fingers;
if (priv->proto_version == ALPS_PROTO_V3) {
if (alps_process_bitmap(priv, f.x_map,
f.y_map, &x1, &y1,
&x2, &y2) == 0)
if (alps_process_bitmap(priv, f) == 0)
fingers = 0; /* Use st data */
/* Now process position packet */
priv->decode_fields(&f, priv->multi_data,
priv->decode_fields(f, priv->multi_data,
psmouse);
} else {
/*
......@@ -624,15 +622,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
* calculate Pt2, so we need to do position
* packet decode first.
*/
priv->decode_fields(&f, priv->multi_data,
priv->decode_fields(f, priv->multi_data,
psmouse);
/*
* Since Dolphin's finger number is reliable,
* there is no need to compare with bmap_fn.
*/
alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
&x2, &y2);
alps_process_bitmap_dolphin(priv, f);
}
} else {
priv->multi_packet = 0;
......@@ -647,10 +644,10 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
* out misidentified bitmap packets, we reject anything with this
* bit set.
*/
if (f.is_mp)
if (f->is_mp)
return;
if (!priv->multi_packet && f.first_mp) {
if (!priv->multi_packet && f->first_mp) {
priv->multi_packet = 1;
memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
return;
......@@ -664,7 +661,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
* with x, y, and z all zero, so these seem to be flukes.
* Ignore them.
*/
if (f.x && f.y && !f.z)
if (f->st.x && f->st.y && !f->pressure)
return;
/*
......@@ -672,36 +669,36 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
* to rely on ST data.
*/
if (!fingers) {
x1 = f.x;
y1 = f.y;
fingers = f.z > 0 ? 1 : 0;
f->mt[0].x = f->st.x;
f->mt[0].y = f->st.y;
fingers = f->pressure > 0 ? 1 : 0;
}
if (f.z >= 64)
if (f->pressure >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
alps_report_semi_mt_data(psmouse, fingers);
input_mt_report_finger_count(dev, fingers);
input_report_key(dev, BTN_LEFT, f.left);
input_report_key(dev, BTN_RIGHT, f.right);
input_report_key(dev, BTN_MIDDLE, f.middle);
input_report_key(dev, BTN_LEFT, f->left);
input_report_key(dev, BTN_RIGHT, f->right);
input_report_key(dev, BTN_MIDDLE, f->middle);
if (f.z > 0) {
input_report_abs(dev, ABS_X, f.x);
input_report_abs(dev, ABS_Y, f.y);
if (f->pressure > 0) {
input_report_abs(dev, ABS_X, f->st.x);
input_report_abs(dev, ABS_Y, f->st.y);
}
input_report_abs(dev, ABS_PRESSURE, f.z);
input_report_abs(dev, ABS_PRESSURE, f->pressure);
input_sync(dev);
if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
input_report_key(dev2, BTN_LEFT, f.ts_left);
input_report_key(dev2, BTN_RIGHT, f.ts_right);
input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
input_report_key(dev2, BTN_LEFT, f->ts_left);
input_report_key(dev2, BTN_RIGHT, f->ts_right);
input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
input_sync(dev2);
}
}
......@@ -801,12 +798,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
int offset;
int x, y, z;
int left, right;
int x1, y1, x2, y2;
int fingers = 0;
unsigned int x_bitmap, y_bitmap;
struct alps_fields *f = &priv->f;
int offset, fingers = 0;
/*
* v4 has a 6-byte encoding for bitmap data, but this data is
......@@ -828,67 +821,55 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
if (++priv->multi_packet > 2) {
priv->multi_packet = 0;
x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
f->x_map = ((priv->multi_data[2] & 0x1f) << 10) |
((priv->multi_data[3] & 0x60) << 3) |
((priv->multi_data[0] & 0x3f) << 2) |
((priv->multi_data[1] & 0x60) >> 5);
y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
f->y_map = ((priv->multi_data[5] & 0x01) << 10) |
((priv->multi_data[3] & 0x1f) << 5) |
(priv->multi_data[1] & 0x1f);
fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
&x1, &y1, &x2, &y2);
/* Store MT data.*/
priv->fingers = fingers;
priv->x1 = x1;
priv->x2 = x2;
priv->y1 = y1;
priv->y2 = y2;
f->fingers = alps_process_bitmap(priv, f);
}
left = packet[4] & 0x01;
right = packet[4] & 0x02;
f->left = packet[4] & 0x01;
f->right = packet[4] & 0x02;
x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
((packet[0] & 0x30) >> 4);
y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
z = packet[5] & 0x7f;
f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
((packet[0] & 0x30) >> 4);
f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
f->pressure = packet[5] & 0x7f;
/*
* If there were no contacts in the bitmap, use ST
* points in MT reports.
* If there were two contacts or more, report MT data.
*/
if (priv->fingers < 2) {
x1 = x;
y1 = y;
fingers = z > 0 ? 1 : 0;
if (f->fingers < 2) {
f->mt[0].x = f->st.x;
f->mt[0].y = f->st.y;
fingers = f->pressure > 0 ? 1 : 0;
} else {
fingers = priv->fingers;
x1 = priv->x1;
x2 = priv->x2;
y1 = priv->y1;
y2 = priv->y2;
fingers = f->fingers;
}
if (z >= 64)
if (f->pressure >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
alps_report_semi_mt_data(psmouse, fingers);
input_mt_report_finger_count(dev, fingers);
input_report_key(dev, BTN_LEFT, left);
input_report_key(dev, BTN_RIGHT, right);
input_report_key(dev, BTN_LEFT, f->left);
input_report_key(dev, BTN_RIGHT, f->right);
if (z > 0) {
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
if (f->pressure > 0) {
input_report_abs(dev, ABS_X, f->st.x);
input_report_abs(dev, ABS_Y, f->st.y);
}
input_report_abs(dev, ABS_PRESSURE, z);
input_report_abs(dev, ABS_PRESSURE, f->pressure);
input_sync(dev);
}
......
......@@ -12,6 +12,8 @@
#ifndef _ALPS_H
#define _ALPS_H
#include <linux/input/mt.h>
#define ALPS_PROTO_V1 1
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
......@@ -19,6 +21,8 @@
#define ALPS_PROTO_V5 5
#define ALPS_PROTO_V6 6
#define MAX_TOUCHES 2
#define DOLPHIN_COUNT_PER_ELECTRODE 64
#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */
#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */
......@@ -75,9 +79,9 @@ struct alps_bitmap_point {
* @x_map: Bitmap of active X positions for MT.
* @y_map: Bitmap of active Y positions for MT.
* @fingers: Number of fingers for MT.
* @x: X position for ST.
* @y: Y position for ST.
* @z: Z position for ST.
* @pressure: Pressure.
* @st: position for ST.
* @mt: position for MT.
* @first_mp: Packet is the first of a multi-packet report.
* @is_mp: Packet is part of a multi-packet report.
* @left: Left touchpad button is active.
......@@ -91,9 +95,11 @@ struct alps_fields {
unsigned int x_map;
unsigned int y_map;
unsigned int fingers;
unsigned int x;
unsigned int y;
unsigned int z;
int pressure;
struct input_mt_pos st;
struct input_mt_pos mt[MAX_TOUCHES];
unsigned int first_mp:1;
unsigned int is_mp:1;
......@@ -130,11 +136,7 @@ struct alps_fields {
* @prev_fin: Finger bit from previous packet.
* @multi_packet: Multi-packet data in progress.
* @multi_data: Saved multi-packet data.
* @x1: First X coordinate from last MT report.
* @x2: Second X coordinate from last MT report.
* @y1: First Y coordinate from last MT report.
* @y2: Second Y coordinate from last MT report.
* @fingers: Number of fingers from last MT report.
* @f: Decoded packet data fields.
* @quirks: Bitmap of ALPS_QUIRK_*.
* @timer: Timer for flushing out the final report packet in the stream.
*/
......@@ -162,8 +164,7 @@ struct alps_data {
int prev_fin;
int multi_packet;
unsigned char multi_data[6];
int x1, x2, y1, y2;
int fingers;
struct alps_fields f;
u8 quirks;
struct timer_list timer;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册