iwlagn: modify digital SVR for 1000

On 1000, there are two Switching Voltage Regulators (SVR). The first one
apply digital voltage level (1.32V) for PCIe block and core. We need to
use this regulator to solve a stability issue related to noisy DC2DC
line in the silicon.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -239,6 +239,13 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
 				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
 
+	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_1000) {
+		/* Setting digital SVR for 1000 card to 1.32V */
+		iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
+					APMG_SVR_DIGITAL_VOLTAGE_1_32,
+					~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+	}
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 

drivers/net/wireless/iwlwifi/iwl-prph.h

@@ -80,6 +80,8 @@
 #define APMG_RFKILL_REG			(APMG_BASE + 0x0014)
 #define APMG_RTC_INT_STT_REG		(APMG_BASE + 0x001c)
 #define APMG_RTC_INT_MSK_REG		(APMG_BASE + 0x0020)
+#define APMG_DIGITAL_SVR_REG		(APMG_BASE + 0x0058)
+#define APMG_ANALOG_SVR_REG		(APMG_BASE + 0x006C)
 
 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
@@ -91,7 +93,8 @@
 #define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN		(0x00000000)
 #define APMG_PS_CTRL_VAL_PWR_SRC_MAX		(0x01000000) /* 3945 only */
 #define APMG_PS_CTRL_VAL_PWR_SRC_VAUX		(0x02000000)
-
+#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK	(0x000001E0) /* bit 8:5 */
+#define APMG_SVR_DIGITAL_VOLTAGE_1_32		(0x00000060)
 
 #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)