提交 028afe71 编写于 作者: D Dhananjay Phadke 提交者: David S. Miller

netxen: add vlan tx acceleration support

Enable vlan tx acceleration for NX3031 if firmware advertises
capability.
Signed-off-by: NAmit Kumar Salecha <amit@netxen.com>
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 9b08beba
......@@ -304,6 +304,10 @@ struct netxen_ring_ctx {
#define FLAGS_IPSEC_SA_ADD 0x04
#define FLAGS_IPSEC_SA_DELETE 0x08
#define FLAGS_VLAN_TAGGED 0x10
#define FLAGS_VLAN_OOB 0x40
#define netxen_set_tx_vlan_tci(cmd_desc, v) \
(cmd_desc)->vlan_TCI = cpu_to_le16(v);
#define netxen_set_cmd_desc_port(cmd_desc, var) \
((cmd_desc)->port_ctxid |= ((var) & 0x0F))
......@@ -342,7 +346,9 @@ struct cmd_desc_type0 {
__le64 addr_buffer4;
__le64 unused;
__le16 vlan_TCI;
__le16 reserved;
__le32 reserved2;
} __attribute__ ((aligned(64)));
......@@ -1111,6 +1117,9 @@ typedef struct {
#define NX_FW_CAPABILITY_LINK_NOTIFICATION (1 << 5)
#define NX_FW_CAPABILITY_SWITCHING (1 << 6)
#define NX_FW_CAPABILITY_PEXQ (1 << 7)
#define NX_FW_CAPABILITY_BDG (1 << 8)
#define NX_FW_CAPABILITY_FVLANTX (1 << 9)
/* module types */
#define LINKEVENT_MODULE_NOT_PRESENT 1
......
......@@ -1016,6 +1016,9 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
netdev->vlan_features |= NETIF_F_HIGHDMA;
}
if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
netdev->features |= (NETIF_F_HW_VLAN_TX);
netdev->irq = adapter->msix_entries[0].vector;
err = netxen_napi_add(adapter, netdev);
......@@ -1333,15 +1336,24 @@ netxen_tso_check(struct net_device *netdev,
{
u8 opcode = TX_ETHER_PKT;
__be16 protocol = skb->protocol;
u16 flags = 0;
u16 flags = 0, vid = 0;
u32 producer;
int copied, offset, copy_len, hdr_len = 0, tso = 0;
int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
struct cmd_desc_type0 *hwdesc;
struct vlan_ethhdr *vh;
if (protocol == cpu_to_be16(ETH_P_8021Q)) {
struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
vh = (struct vlan_ethhdr *)skb->data;
protocol = vh->h_vlan_encapsulated_proto;
flags = FLAGS_VLAN_TAGGED;
} else if (vlan_tx_tag_present(skb)) {
flags = FLAGS_VLAN_OOB;
vid = vlan_tx_tag_get(skb);
netxen_set_tx_vlan_tci(first_desc, vid);
vlan_oob = 1;
}
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
......@@ -1351,6 +1363,13 @@ netxen_tso_check(struct net_device *netdev,
first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
first_desc->total_hdr_length = hdr_len;
if (vlan_oob) {
first_desc->total_hdr_length += VLAN_HLEN;
first_desc->tcp_hdr_offset = VLAN_HLEN;
first_desc->ip_hdr_offset = VLAN_HLEN;
/* Only in case of TSO on vlan device */
flags |= FLAGS_VLAN_TAGGED;
}
opcode = (protocol == cpu_to_be16(ETH_P_IPV6)) ?
TX_TCP_LSO6 : TX_TCP_LSO;
......@@ -1375,8 +1394,9 @@ netxen_tso_check(struct net_device *netdev,
opcode = TX_UDPV6_PKT;
}
}
first_desc->tcp_hdr_offset = skb_transport_offset(skb);
first_desc->ip_hdr_offset = skb_network_offset(skb);
first_desc->tcp_hdr_offset += skb_transport_offset(skb);
first_desc->ip_hdr_offset += skb_network_offset(skb);
netxen_set_tx_flags_opcode(first_desc, flags, opcode);
if (!tso)
......@@ -1389,6 +1409,28 @@ netxen_tso_check(struct net_device *netdev,
copied = 0;
offset = 2;
if (vlan_oob) {
/* Create a TSO vlan header template for firmware */
hwdesc = &tx_ring->desc_head[producer];
tx_ring->cmd_buf_arr[producer].skb = NULL;
copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
hdr_len + VLAN_HLEN);
vh = (struct vlan_ethhdr *)((char *)hwdesc + 2);
skb_copy_from_linear_data(skb, vh, 12);
vh->h_vlan_proto = htons(ETH_P_8021Q);
vh->h_vlan_TCI = htons(vid);
skb_copy_from_linear_data_offset(skb, 12,
(char *)vh + 16, copy_len - 16);
copied = copy_len;
offset = 0;
producer = get_next_index(producer, tx_ring->num_desc);
}
while (copied < hdr_len) {
copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册