提交 01e8ef11 编写于 作者: P Parag Warudkar 提交者: Linus Torvalds

x86: sysfs: kill owner field from attribute

Tejun's commit 7b595756 made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: NParag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 bb26b963
......@@ -431,7 +431,7 @@ static ssize_t acpi_battery_alarm_store(struct device *dev,
}
static struct device_attribute alarm_attr = {
.attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE},
.attr = {.name = "alarm", .mode = 0644},
.show = acpi_battery_alarm_show,
.store = acpi_battery_alarm_store,
};
......
......@@ -463,7 +463,7 @@ static ssize_t acpi_battery_alarm_store(struct device *dev,
}
static struct device_attribute alarm_attr = {
.attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE},
.attr = {.name = "alarm", .mode = 0644},
.show = acpi_battery_alarm_show,
.store = acpi_battery_alarm_store,
};
......
......@@ -115,7 +115,6 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
table_attr->attr.read = acpi_table_show;
table_attr->attr.attr.name = table_attr->name;
table_attr->attr.attr.mode = 0444;
table_attr->attr.attr.owner = THIS_MODULE;
return;
}
......
......@@ -90,7 +90,7 @@ static DEVICE_ATTR(state, S_IRUGO, aoedisk_show_state, NULL);
static DEVICE_ATTR(mac, S_IRUGO, aoedisk_show_mac, NULL);
static DEVICE_ATTR(netif, S_IRUGO, aoedisk_show_netif, NULL);
static struct device_attribute dev_attr_firmware_version = {
.attr = { .name = "firmware-version", .mode = S_IRUGO, .owner = THIS_MODULE },
.attr = { .name = "firmware-version", .mode = S_IRUGO },
.show = aoedisk_show_fwver,
};
......
......@@ -391,7 +391,7 @@ static ssize_t pid_show(struct device *dev,
}
static struct device_attribute pid_attr = {
.attr = { .name = "pid", .mode = S_IRUGO, .owner = THIS_MODULE },
.attr = { .name = "pid", .mode = S_IRUGO},
.show = pid_show,
};
......
......@@ -732,7 +732,6 @@ static int __init ibft_create_attribute(struct ibft_kobject *kobj_data,
attr->attr.name = name;
attr->attr.mode = S_IRUSR;
attr->attr.owner = THIS_MODULE;
attr->hdr = hdr;
attr->show = show;
......
......@@ -460,7 +460,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
*/
at24->bin.attr.name = "eeprom";
at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
at24->bin.attr.owner = THIS_MODULE;
at24->bin.read = at24_bin_read;
at24->bin.size = chip.byte_len;
......
......@@ -190,7 +190,6 @@ static struct bin_attribute ds1682_eeprom_attr = {
.attr = {
.name = "eeprom",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.size = DS1682_EEPROM_SIZE,
.read = ds1682_eeprom_read,
......
......@@ -122,7 +122,7 @@ struct cm_counter_attribute {
#define CM_COUNTER_ATTR(_name, _index) \
struct cm_counter_attribute cm_##_name##_counter_attr = { \
.attr = { .name = __stringify(_name), .mode = 0444, .owner = THIS_MODULE }, \
.attr = { .name = __stringify(_name), .mode = 0444 }, \
.index = _index \
}
......
......@@ -1044,7 +1044,6 @@ static int mspro_block_read_attributes(struct memstick_dev *card)
s_attr->dev_attr.attr.name = s_attr->name;
s_attr->dev_attr.attr.mode = S_IRUGO;
s_attr->dev_attr.attr.owner = THIS_MODULE;
s_attr->dev_attr.show = mspro_block_attr_show(s_attr->id);
if (!rc)
......
......@@ -30,7 +30,7 @@
#define POWER_SUPPLY_ATTR(_name) \
{ \
.attr = { .name = #_name, .mode = 0444, .owner = THIS_MODULE }, \
.attr = { .name = #_name, .mode = 0444 }, \
.show = power_supply_show_property, \
.store = NULL, \
}
......
......@@ -592,7 +592,6 @@ static struct bin_attribute nvram = {
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.read = cmos_nvram_read,
......
......@@ -606,7 +606,6 @@ ds1305_nvram_write(struct kobject *kobj, struct bin_attribute *attr,
static struct bin_attribute nvram = {
.attr.name = "nvram",
.attr.mode = S_IRUGO | S_IWUSR,
.attr.owner = THIS_MODULE,
.read = ds1305_nvram_read,
.write = ds1305_nvram_write,
.size = DS1305_NVRAM_LEN,
......
......@@ -551,7 +551,6 @@ static struct bin_attribute nvram = {
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.read = ds1307_nvram_read,
......
......@@ -481,7 +481,6 @@ static struct bin_attribute ds1511_nvram_attr = {
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUGO,
.owner = THIS_MODULE,
},
.size = DS1511_RAM_MAX,
.read = ds1511_nvram_read,
......
......@@ -360,7 +360,6 @@ static struct bin_attribute m48t59_nvram_attr = {
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.read = m48t59_nvram_read,
.write = m48t59_nvram_write,
......
......@@ -280,7 +280,6 @@ static struct bin_attribute stk17ta8_nvram_attr = {
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.size = RTC_OFFSET,
.read = stk17ta8_nvram_read,
......
......@@ -189,7 +189,6 @@ static struct bin_attribute arcmsr_sysfs_message_read_attr = {
.attr = {
.name = "mu_read",
.mode = S_IRUSR ,
.owner = THIS_MODULE,
},
.size = 1032,
.read = arcmsr_sysfs_iop_message_read,
......@@ -199,7 +198,6 @@ static struct bin_attribute arcmsr_sysfs_message_write_attr = {
.attr = {
.name = "mu_write",
.mode = S_IWUSR,
.owner = THIS_MODULE,
},
.size = 1032,
.write = arcmsr_sysfs_iop_message_write,
......@@ -209,7 +207,6 @@ static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
.attr = {
.name = "mu_clear",
.mode = S_IWUSR,
.owner = THIS_MODULE,
},
.size = 1,
.write = arcmsr_sysfs_iop_message_clear,
......
......@@ -80,7 +80,6 @@ static struct bin_attribute w1_ds2760_bin_attr = {
.attr = {
.name = "w1_slave",
.mode = S_IRUGO,
.owner = THIS_MODULE,
},
.size = DS2760_DATA_SIZE,
.read = w1_ds2760_read_bin,
......
......@@ -21,8 +21,9 @@ struct kobject;
struct module;
/* FIXME
* The *owner field is no longer used, but leave around
* until the tree gets cleaned up fully.
* The *owner field is no longer used.
* x86 tree has been cleaned up. The owner
* attribute is still left for other arches.
*/
struct attribute {
const char *name;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册