Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 01a1d5ac 编写于 作者: J Joe Perches 提交者： Michael Grzeschik
浏览文件
操作

arcnet: Add and remove blank lines 

Use a more current kernel line style.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
上级 cb334648
隐藏空白更改
内联 并排
Showing with 13 addition and 93 deletion
drivers/net/arcnet/arc-rawmode.c
浏览文件 @ 01a1d5ac
......@@ -35,7 +35,6 @@
#define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length);
static int build_header(struct sk_buff *skb, struct net_device *dev,
......@@ -54,7 +53,6 @@ static struct ArcProto rawmode_proto =
.ack_tx = NULL
};
static int __init arcnet_raw_init(void)
{
int count;
......@@ -83,7 +81,6 @@ module_exit(arcnet_raw_exit);
MODULE_LICENSE("GPL");
/* packet receiver */
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
......@@ -127,7 +124,6 @@ static void rx(struct net_device *dev, int bufnum,
netif_rx(skb);
}
/*
* Create the ARCnet hard/soft headers for raw mode.
* There aren't any soft headers in raw mode - not even the protocol id.
......@@ -163,7 +159,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
return hdr_size; /* success */
}
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum)
{
......
drivers/net/arcnet/arc-rimi.c
浏览文件 @ 01a1d5ac
......@@ -36,10 +36,8 @@
#include <asm/io.h>
#include <linux/arcdevice.h>
#define VERSION "arcnet: RIM I (entirely mem-mapped) support\n"
/* Internal function declarations */
static int arcrimi_probe(struct net_device *dev);
......@@ -78,7 +76,6 @@ static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offse
#define AINTMASK(msk) writeb((msk), _INTMASK)
#define SETCONF() writeb(lp->config, _CONFIG)
/*
* We cannot probe for a RIM I card; one reason is I don't know how to reset
* them. In fact, we can't even get their node ID automatically. So, we
......@@ -249,7 +246,6 @@ static int __init arcrimi_found(struct net_device *dev)
return -EIO;
}
/*
* Do a hardware reset on the card, and set up necessary registers.
*
......@@ -308,15 +304,16 @@ static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
{
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count));
}
static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset,
void *buf, int count)
{
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
}
......@@ -374,6 +371,7 @@ static void __exit arc_rimi_exit(void)
static int __init arcrimi_setup(char *s)
{
int ints[8];
s = get_options(s, 8, ints);
if (!ints[0])
return 1;
......
drivers/net/arcnet/arcnet.c
浏览文件 @ 01a1d5ac
......@@ -168,7 +168,6 @@ void arcnet_dump_skb(struct net_device *dev,
EXPORT_SYMBOL(arcnet_dump_skb);
#endif
/*
* Dump the contents of an ARCnet buffer
*/
......@@ -206,7 +205,6 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
#endif
/*
* Unregister a protocol driver from the arc_proto_map. Protocol drivers
* are responsible for registering themselves, but the unregister routine
......@@ -229,7 +227,6 @@ void arcnet_unregister_proto(struct ArcProto *proto)
}
}
/*
* Add a buffer to the queue. Only the interrupt handler is allowed to do
* this, unless interrupts are disabled.
......@@ -254,7 +251,6 @@ static void release_arcbuf(struct net_device *dev, int bufnum)
}
}
/*
* Get a buffer from the queue. If this returns -1, there are no buffers
* available.
......@@ -281,7 +277,6 @@ static int get_arcbuf(struct net_device *dev)
}
}
BUGLVL(D_DURING) {
BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf);
for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
......@@ -293,7 +288,6 @@ static int get_arcbuf(struct net_device *dev)
return buf;
}
static int choose_mtu(void)
{
int count, mtu = 65535;
......@@ -348,6 +342,7 @@ struct net_device *alloc_arcdev(const char *name)
arcdev_setup);
if (dev) {
struct arcnet_local *lp = netdev_priv(dev);
spin_lock_init(&lp->lock);
}
......@@ -380,7 +375,6 @@ int arcnet_open(struct net_device *dev)
BUGMSG2(D_PROTO, "\n");
}
BUGMSG(D_INIT, "arcnet_open: resetting card.\n");
/* try to put the card in a defined state - if it fails the first
......@@ -437,7 +431,6 @@ int arcnet_open(struct net_device *dev)
ACOMMAND(CFLAGScmd | RESETclear);
}
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
/* make sure we're ready to receive IRQ's. */
AINTMASK(0);
......@@ -459,7 +452,6 @@ int arcnet_open(struct net_device *dev)
return error;
}
/* The inverse routine to arcnet_open - shuts down the card. */
int arcnet_close(struct net_device *dev)
{
......@@ -479,7 +471,6 @@ int arcnet_close(struct net_device *dev)
return 0;
}
static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, const void *daddr,
const void *saddr, unsigned len)
......@@ -498,7 +489,6 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
BUGMSG(D_NORMAL, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n",
skb->len, len);
/* Type is host order - ? */
if (type == ETH_P_ARCNET) {
proto = arc_raw_proto;
......@@ -622,7 +612,6 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
return retval; /* no need to try again */
}
/*
* Actually start transmitting a packet that was loaded into a buffer
* by prepare_tx. This should _only_ be called by the interrupt handler.
......@@ -654,7 +643,6 @@ static int go_tx(struct net_device *dev)
return 1;
}
/* Called by the kernel when transmit times out */
void arcnet_timeout(struct net_device *dev)
{
......@@ -691,7 +679,6 @@ void arcnet_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
/*
* The typical workload of the driver: Handle the network interface
* interrupts. Establish which device needs attention, and call the correct
......@@ -787,7 +774,6 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
didsomething++;
}
/* a transmit finished, and we're interested in it. */
if ((status & lp->intmask & TXFREEflag) || lp->timed_out) {
lp->intmask &= ~(TXFREEflag | EXCNAKflag);
......@@ -814,6 +800,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
if (lp->outgoing.proto &&
lp->outgoing.proto->ack_tx) {
int ackstatus;
if (status & TXACKflag)
ackstatus = 2;
else if (lp->excnak_pending)
......@@ -838,6 +825,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
/* continue a split packet, if any */
if (lp->outgoing.proto && lp->outgoing.proto->continue_tx) {
int txbuf = get_arcbuf(dev);
if (txbuf != -1) {
if (lp->outgoing.proto->continue_tx(dev, txbuf)) {
/* that was the last segment */
......@@ -930,7 +918,6 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
ASTATUS(), boguscount);
BUGMSG(D_DURING, "\n");
AINTMASK(0);
udelay(1);
AINTMASK(lp->intmask);
......@@ -939,7 +926,6 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
return retval;
}
/*
* This is a generic packet receiver that calls arcnet??_rx depending on the
* protocol ID found.
......@@ -1002,7 +988,6 @@ static void arcnet_rx(struct net_device *dev, int bufnum)
arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length);
}
static void null_rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
{
......@@ -1011,7 +996,6 @@ static void null_rx(struct net_device *dev, int bufnum,
pkthdr->soft.rfc1201.proto, pkthdr->hard.source);
}
static int null_build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
......@@ -1025,7 +1009,6 @@ static int null_build_header(struct sk_buff *skb, struct net_device *dev,
return 0;
}
/* the "do nothing" prepare_tx function warns that there's nothing to do. */
static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
int length, int bufnum)
......
drivers/net/arcnet/capmode.c
浏览文件 @ 01a1d5ac
......@@ -90,7 +90,6 @@ static void rx(struct net_device *dev, int bufnum,
netif_rx(skb);
}
/*
* Create the ARCnet hard/soft headers for cap mode.
* There aren't any soft headers in cap mode - not even the protocol id.
......@@ -130,7 +129,6 @@ static int build_header(struct sk_buff *skb,
return hdr_size; /* success */
}
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum)
{
......@@ -138,7 +136,6 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
struct arc_hardware *hard = &pkt->hard;
int ofs;
/* hard header is not included in packet length */
length -= ARC_HDR_SIZE;
/* And neither is the cookie field */
......
drivers/net/arcnet/com20020-isa.c
浏览文件 @ 01a1d5ac
......@@ -43,7 +43,6 @@
#define VERSION "arcnet: COM20020 ISA support (by David Woodhouse et al.)\n"
/*
* We cannot (yet) probe for an IO mapped card, although we can check that
* it's where we were told it was, and even do autoirq.
......
drivers/net/arcnet/com20020-pci.c
浏览文件 @ 01a1d5ac
......@@ -42,7 +42,6 @@
#include <asm/io.h>
#define VERSION "arcnet: COM20020 PCI support\n"
/* Module parameters */
......@@ -86,7 +85,6 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
INIT_LIST_HEAD(&priv->list_dev);
for (i = 0; i < ci->devcount; i++) {
struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
struct com20020_dev *card;
......
drivers/net/arcnet/com20020.c
浏览文件 @ 01a1d5ac
......@@ -70,7 +70,6 @@ static void com20020_copy_from_card(struct net_device *dev, int bufnum,
TIME("insb", count, insb(_MEMDATA, buf, count));
}
static void com20020_copy_to_card(struct net_device *dev, int bufnum,
int offset, void *buf, int count)
{
......@@ -84,7 +83,6 @@ static void com20020_copy_to_card(struct net_device *dev, int bufnum,
TIME("outsb", count, outsb(_MEMDATA, buf, count));
}
/* Reset the card and check some basic stuff during the detection stage. */
int com20020_check(struct net_device *dev)
{
......@@ -242,7 +240,6 @@ int com20020_found(struct net_device *dev, int shared)
return 0;
}
/*
* Do a hardware reset on the card, and set up necessary registers.
*
......@@ -295,22 +292,21 @@ static int com20020_reset(struct net_device *dev, int really_reset)
return 0;
}
static void com20020_setmask(struct net_device *dev, int mask)
{
u_int ioaddr = dev->base_addr;
BUGMSG(D_DURING, "Setting mask to %x at %x\n", mask, ioaddr);
AINTMASK(mask);
}
static void com20020_command(struct net_device *dev, int cmd)
{
u_int ioaddr = dev->base_addr;
ACOMMAND(cmd);
}
static int com20020_status(struct net_device *dev)
{
u_int ioaddr = dev->base_addr;
......
drivers/net/arcnet/com20020_cs.c
浏览文件 @ 01a1d5ac
......@@ -49,7 +49,6 @@
#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
static void regdump(struct net_device *dev)
{
#ifdef DEBUG
......@@ -83,8 +82,6 @@ static void regdump(struct net_device *dev)
#endif
}
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
......@@ -304,6 +301,7 @@ static int com20020_resume(struct pcmcia_device *link)
if (link->open) {
int ioaddr = dev->base_addr;
struct arcnet_local *lp = netdev_priv(dev);
ARCRESET;
}
......
drivers/net/arcnet/com90io.c
浏览文件 @ 01a1d5ac
......@@ -37,10 +37,8 @@
#include <asm/io.h>
#include <linux/arcdevice.h>
#define VERSION "arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)\n"
/* Internal function declarations */
static int com90io_found(struct net_device *dev);
......@@ -53,7 +51,6 @@ static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset,
static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset,
void *buf, int count);
/* Handy defines for ARCnet specific stuff */
/* The number of low I/O ports used by the card. */
......@@ -78,7 +75,6 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offse
#define AINTMASK(msk) outb((msk), _INTMASK)
#define SETCONF() outb((lp->config), _CONFIG)
/****************************************************************************
* *
* IO-mapped operation routines *
......@@ -111,7 +107,6 @@ static void put_buffer_byte(struct net_device *dev, unsigned offset, u_char datu
#endif
static void get_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest)
{
int ioaddr = dev->base_addr;
......@@ -227,7 +222,6 @@ static int __init com90io_probe(struct net_device *dev)
return -ENODEV;
}
/* Set up the struct net_device associated with this card. Called after
* probing succeeds.
*/
......@@ -279,7 +273,6 @@ static int __init com90io_found(struct net_device *dev)
return 0;
}
/*
* Do a hardware reset on the card, and set up necessary registers.
*
......@@ -319,7 +312,6 @@ static int com90io_reset(struct net_device *dev, int really_reset)
return 0;
}
static void com90io_command(struct net_device *dev, int cmd)
{
short ioaddr = dev->base_addr;
......@@ -327,7 +319,6 @@ static void com90io_command(struct net_device *dev, int cmd)
ACOMMAND(cmd);
}
static int com90io_status(struct net_device *dev)
{
short ioaddr = dev->base_addr;
......@@ -335,7 +326,6 @@ static int com90io_status(struct net_device *dev)
return ASTATUS();
}
static void com90io_setmask(struct net_device *dev, int mask)
{
short ioaddr = dev->base_addr;
......@@ -349,7 +339,6 @@ static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset,
TIME("put_whole_buffer", count, put_whole_buffer(dev, bufnum * 512 + offset, count, buf));
}
static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset,
void *buf, int count)
{
......@@ -369,6 +358,7 @@ MODULE_LICENSE("GPL");
static int __init com90io_setup(char *s)
{
int ints[4];
s = get_options(s, 4, ints);
if (!ints[0])
return 0;
......
drivers/net/arcnet/com90xx.c
浏览文件 @ 01a1d5ac
......@@ -35,10 +35,8 @@
#include <asm/io.h>
#include <linux/arcdevice.h>
#define VERSION "arcnet: COM90xx chipset support\n"
/* Define this to speed up the autoprobe by assuming if only one io port and
* shmem are left in the list at Stage 5, they must correspond to each
* other.
......@@ -53,7 +51,6 @@
*/
#undef FAST_PROBE
/* Internal function declarations */
static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *);
static void com90xx_command(struct net_device *dev, int command);
......@@ -97,7 +94,6 @@ static int numcards;
#define ACOMMAND(cmd) outb((cmd), _COMMAND)
#define AINTMASK(msk) outb((msk), _INTMASK)
static int com90xx_skip_probe __initdata = 0;
/* Module parameters */
......@@ -308,6 +304,7 @@ static void __init com90xx_probe(void)
numprint = -1;
for (port = &ports[0]; port < ports + numports; port++) {
int found = 0;
numprint++;
numprint %= 8;
if (!numprint) {
......@@ -552,7 +549,6 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem
return -EIO;
}
static void com90xx_command(struct net_device *dev, int cmd)
{
short ioaddr = dev->base_addr;
......@@ -560,7 +556,6 @@ static void com90xx_command(struct net_device *dev, int cmd)
ACOMMAND(cmd);
}
static int com90xx_status(struct net_device *dev)
{
short ioaddr = dev->base_addr;
......@@ -568,7 +563,6 @@ static int com90xx_status(struct net_device *dev)
return ASTATUS();
}
static void com90xx_setmask(struct net_device *dev, int mask)
{
short ioaddr = dev->base_addr;
......@@ -576,7 +570,6 @@ static void com90xx_setmask(struct net_device *dev, int mask)
AINTMASK(mask);
}
/*
* Do a hardware reset on the card, and set up necessary registers.
*
......@@ -625,19 +618,19 @@ static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset,
{
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count));
}
static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset,
void *buf, int count)
{
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
}
MODULE_LICENSE("GPL");
static int __init com90xx_init(void)
......
drivers/net/arcnet/rfc1051.c
浏览文件 @ 01a1d5ac
......@@ -34,7 +34,6 @@
#define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length);
......@@ -43,7 +42,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum);
static struct ArcProto rfc1051_proto =
{
.suffix = 's',
......@@ -56,7 +54,6 @@ static struct ArcProto rfc1051_proto =
.ack_tx = NULL
};
static int __init arcnet_rfc1051_init(void)
{
printk(VERSION);
......@@ -120,7 +117,6 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
return htons(ETH_P_IP);
}
/* packet receiver */
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
......@@ -161,7 +157,6 @@ static void rx(struct net_device *dev, int bufnum,
netif_rx(skb);
}
/*
* Create the ARCnet hard/soft headers for RFC1051.
*/
......@@ -188,7 +183,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
return 0;
}
/*
* Set the source hardware address.
*
......@@ -214,7 +208,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
return hdr_size; /* success */
}
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum)
{
......
drivers/net/arcnet/rfc1201.c
浏览文件 @ 01a1d5ac
......@@ -34,7 +34,6 @@
MODULE_LICENSE("GPL");
#define VERSION "arcnet: RFC1201 \"standard\" (`a') encapsulation support loaded.\n"
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length);
......@@ -56,7 +55,6 @@ static struct ArcProto rfc1201_proto =
.ack_tx = NULL
};
static int __init arcnet_rfc1201_init(void)
{
printk(VERSION);
......@@ -129,7 +127,6 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
return htons(ETH_P_IP);
}
/* packet receiver */
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
......@@ -369,7 +366,6 @@ static void rx(struct net_device *dev, int bufnum,
}
}
/* Create the ARCnet hard/soft headers for RFC1201. */
static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
......@@ -437,7 +433,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
return hdr_size;
}
static void load_pkt(struct net_device *dev, struct arc_hardware *hard,
struct arc_rfc1201 *soft, int softlen, int bufnum)
{
......@@ -470,7 +465,6 @@ static void load_pkt(struct net_device *dev, struct arc_hardware *hard,
lp->lastload_dest = hard->dest;
}
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum)
{
......@@ -478,7 +472,6 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
const int maxsegsize = XMTU - RFC1201_HDR_SIZE;
struct Outgoing *out;
BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
lp->next_tx, lp->cur_tx, bufnum);
......@@ -506,7 +499,6 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
return 1; /* done */
}
static int continue_tx(struct net_device *dev, int bufnum)
{
struct arcnet_local *lp = netdev_priv(dev);
......
include/linux/arcdevice.h
浏览文件 @ 01a1d5ac
......@@ -34,7 +34,6 @@
*/
#define RECON_THRESHOLD 30
/*
* Define this to the minimum "timeout" value. If a transmit takes longer
* than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large
......@@ -44,11 +43,9 @@
*/
#define TX_TIMEOUT (HZ * 200 / 1000)
/* Display warnings about the driver being an ALPHA version. */
#undef ALPHA_WARNING
/*
* Debugging bitflags: each option can be enabled individually.
*
......@@ -106,7 +103,6 @@ extern int arcnet_debug;
call; \
}
/*
* Time needed to reset the card - in ms (milliseconds). This works on my
* SMC PC100. I can't find a reference that tells me just how long I
......@@ -182,7 +178,6 @@ extern int arcnet_debug;
#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit,
but default is 2.5MBit. */
/* information needed to define an encapsulation driver */
struct ArcProto {
char suffix; /* a for RFC1201, e for ether-encap, etc. */
......@@ -204,7 +199,6 @@ struct ArcProto {
extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
*arc_bcast_proto, *arc_raw_proto;
/*
* "Incoming" is information needed for each address that could be sending
* to us. Mostly for partially-received split packets.
......@@ -216,7 +210,6 @@ struct Incoming {
numpackets; /* number of packets in split */
};
/* only needed for RFC1201 */
struct Outgoing {
struct ArcProto *proto; /* protocol driver that owns this:
......@@ -230,7 +223,6 @@ struct Outgoing {
numsegs; /* number of segments */
};
struct arcnet_local {
uint8_t config, /* current value of CONFIG register */
timeout, /* Extended timeout for COM20020 */
......@@ -251,7 +243,6 @@ struct arcnet_local {
char *card_name; /* card ident string */
int card_flags; /* special card features */
/* On preemtive and SMB a lock is needed */
spinlock_t lock;
......@@ -314,14 +305,11 @@ struct arcnet_local {
void __iomem *mem_start; /* pointer to ioremap'ed MMIO */
};
#define ARCRESET(x) (lp->hw.reset(dev, (x)))
#define ACOMMAND(x) (lp->hw.command(dev, (x)))
#define ASTATUS() (lp->hw.status(dev))
#define AINTMASK(x) (lp->hw.intmask(dev, (x)))
#if ARCNET_DEBUG_MAX & D_SKB
void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
#else
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或