提交 017a0104 编写于 作者: S Stephen Warren

ARM: dt: tegra: ventana: add regulators

Ventana uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.

The data was chosen to match the PMIC HW defaults, with the following
exception:

ldo6: The HW default is 2.85v. The schematics are unlabelled. Internal
research indicates that 1.8v is correct. Our downstream kernel also uses
1.8v.

Portions based on work by Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
上级 6529e638
......@@ -289,6 +289,156 @@
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <0 86 0x4>;
#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
vin-sm2-supply = <&sys_reg>;
vinldo01-supply = <&sm2_reg>;
vinldo23-supply = <&sm2_reg>;
vinldo4-supply = <&sm2_reg>;
vinldo678-supply = <&sm2_reg>;
vinldo9-supply = <&sm2_reg>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
sys_reg: regulator@0 {
reg = <0>;
regulator-compatible = "sys";
regulator-name = "vdd_sys";
regulator-always-on;
};
regulator@1 {
reg = <1>;
regulator-compatible = "sm0";
regulator-name = "vdd_sm0,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
regulator@2 {
reg = <2>;
regulator-compatible = "sm1";
regulator-name = "vdd_sm1,vdd_cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
sm2_reg: regulator@3 {
reg = <3>;
regulator-compatible = "sm2";
regulator-name = "vdd_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
};
/* LDO0 is not connected to anything */
regulator@5 {
reg = <5>;
regulator-compatible = "ldo1";
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
regulator@6 {
reg = <6>;
regulator-compatible = "ldo2";
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
regulator@7 {
reg = <7>;
regulator-compatible = "ldo3";
regulator-name = "vdd_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
regulator@8 {
reg = <8>;
regulator-compatible = "ldo4";
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
regulator@9 {
reg = <9>;
regulator-compatible = "ldo5";
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
regulator@10 {
reg = <10>;
regulator-compatible = "ldo6";
regulator-name = "vdd_ldo6,avdd_vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@11 {
reg = <11>;
regulator-compatible = "ldo7";
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
regulator@12 {
reg = <12>;
regulator-compatible = "ldo8";
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@13 {
reg = <13>;
regulator-compatible = "ldo9";
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
regulator@14 {
reg = <14>;
regulator-compatible = "ldo_rtc";
regulator-name = "vdd_rtc_out,vdd_cell";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};
pmc {
nvidia,invert-interrupt;
};
usb@c5000000 {
......@@ -317,6 +467,60 @@
bus-width = <8>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
gpio = <&pmic 0 0>;
};
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&pmic 1 0>;
enable-active-high;
};
regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpio 22 0>; /* gpio PC6 */
enable-active-high;
};
regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
};
sound {
compatible = "nvidia,tegra-audio-wm8903-ventana",
"nvidia,tegra-audio-wm8903";
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册