提交 016e53de 编写于 作者: T Trent Piepho 提交者: Mauro Carvalho Chehab

V4L/DVB (12293): b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6

The code in skystar23_samsung_tbdu18132_tuner_set_params() and
samsung_tbmu24112_tuner_set_params() is equivalent to what the dvb-pll code
does.  There could be an issue because the dvb-pll code will probe to check
for the tuner, while the previous code didn't do any checks.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 6d67c971
......@@ -66,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
#endif
/* SkyStar2 DVB-S rev 2.3 */
#if FE_SUPPORTED(MT312)
#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL)
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
{
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
......@@ -155,55 +155,34 @@ static struct mt312_config skystar23_samsung_tbdu18132_config = {
.demod_address = 0x0e,
};
static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
.len = sizeof(buf) };
struct flexcop_device *fc = fe->dvb->priv;
div = (params->frequency + (125/2)) / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = (div >> 0) & 0xff;
buf[2] = 0x84 | ((div >> 10) & 0x60);
buf[3] = 0x80;
if (params->frequency < 1550000)
buf[3] |= 0x02;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
static int skystar2_rev23_attach(struct flexcop_device *fc,
struct i2c_adapter *i2c)
{
struct dvb_frontend_ops *ops;
fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
if (fc->fe != NULL) {
struct dvb_frontend_ops *ops = &fc->fe->ops;
ops->tuner_ops.set_params =
skystar23_samsung_tbdu18132_tuner_set_params;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
ops->diseqc_send_burst = flexcop_diseqc_send_burst;
ops->set_tone = flexcop_set_tone;
ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
return 1;
}
return 0;
if (!fc->fe)
return 0;
if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
DVB_PLL_SAMSUNG_TBDU18132))
return 0;
ops = &fc->fe->ops;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
ops->diseqc_send_burst = flexcop_diseqc_send_burst;
ops->set_tone = flexcop_set_tone;
ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
return 1;
}
#else
#define skystar2_rev23_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.6 */
#if FE_SUPPORTED(STV0299)
#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL)
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
......@@ -232,31 +211,6 @@ static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
return 0;
}
static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = {
.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
struct flexcop_device *fc = fe->dvb->priv;
div = params->frequency / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = 0x84; /* 0xC4 */
buf[3] = 0x08;
if (params->frequency < 1500000)
buf[3] |= 0x10;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
static u8 samsung_tbmu24112_inittab[] = {
0x01, 0x15,
0x02, 0x30,
......@@ -318,15 +272,18 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
struct i2c_adapter *i2c)
{
fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
if (fc->fe != NULL) {
struct dvb_frontend_ops *ops = &fc->fe->ops;
ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
return 1;
}
return 0;
if (!fc->fe)
return 0;
if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
DVB_PLL_SAMSUNG_TBMU24112))
return 0;
fc->fe->ops.set_voltage = flexcop_set_voltage;
fc->fe_sleep = fc->fe->ops.sleep;
fc->fe->ops.sleep = flexcop_sleep;
return 1;
}
#else
#define skystar2_rev26_attach NULL
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册