提交 002945f0 编写于 作者: L Laxman Dewangan 提交者: Chanwoo Choi

extcon: palmas: enable ID_GND and ID_FLOAT detection always

When integrating driver with Tegra platform, it is found that
the ID pins get detected only once after booting system and
further removal and re-insert does not detect the ID pin.

Fixing this issue with enabling interrupt on ID_GND and ID_FLOAT
always  and clearing the status on LATCH register which actually
occurred.

Also if interrupt occurs with line status as zero then based on
previous status, set the cable state.

Add debug prints to display the cable state when any cable
insertion/removal happen.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Acked-by: NGraeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
上级 43e3f388
......@@ -57,6 +57,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
extcon_set_cable_state(&palmas_usb->edev, "USB", true);
dev_info(palmas_usb->dev, "USB cable is attached\n");
} else {
dev_dbg(palmas_usb->dev,
"Spurious connect event detected\n");
......@@ -65,6 +66,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(&palmas_usb->edev, "USB", false);
dev_info(palmas_usb->dev, "USB cable is detached\n");
} else {
dev_dbg(palmas_usb->dev,
"Spurious disconnect event detected\n");
......@@ -83,29 +85,24 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
PALMAS_USB_ID_INT_LATCH_SET, &set);
if (set & PALMAS_USB_ID_INT_SRC_ID_GND) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_EN_HI_SET,
PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT);
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_EN_HI_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
} else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_EN_HI_SET,
PALMAS_USB_ID_INT_EN_HI_SET_ID_GND);
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_EN_HI_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
}
return IRQ_HANDLED;
......@@ -122,7 +119,8 @@ static void palmas_enable_irq(struct palmas_usb *palmas_usb)
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_EN_HI_SET,
PALMAS_USB_ID_INT_EN_HI_SET_ID_GND);
PALMAS_USB_ID_INT_EN_HI_SET_ID_GND |
PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT);
palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册