• R
    media: venus: hfi: fix error handling in hfi_sys_init_done() · 3e7caae5
    Rob Clark 提交于
    Not entirely sure what triggers it, but with venus build as kernel
    module and in initrd, we hit this crash:
    
      Unable to handle kernel paging request at virtual address ffff80003c039000
      pgd = ffff00000a14f000
      [ffff80003c039000] *pgd=00000000bd9f7003, *pud=00000000bd9f6003, *pmd=00000000bd9f0003, *pte=0000000000000000
      Internal error: Oops: 96000007 [#1] SMP
      Modules linked in: qcom_wcnss_pil(E+) crc32_ce(E) qcom_common(E) venus_core(E+) remoteproc(E) snd_soc_msm8916_digital(E) virtio_ring(E) cdc_ether(E) snd_soc_lpass_apq8016(E) snd_soc_lpass_cpu(E) snd_soc_apq8016_sbc(E) snd_soc_lpass_platform(E) v4l2_mem2mem(E) virtio(E) snd_soc_core(E) ac97_bus(E) snd_pcm_dmaengine(E) snd_seq(E) leds_gpio(E) videobuf2_v4l2(E) videobuf2_core(E) snd_seq_device(E) snd_pcm(E) videodev(E) media(E) nvmem_qfprom(E) msm(E) snd_timer(E) snd(E) soundcore(E) spi_qup(E) mdt_loader(E) qcom_tsens(E) qcom_spmi_temp_alarm(E) nvmem_core(E) msm_rng(E) uas(E) usb_storage(E) dm9601(E) usbnet(E) mii(E) mmc_block(E) adv7511(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) qcom_spmi_vadc(E) qcom_vadc_common(PE) industrialio(E) pinctrl_spmi_mpp(E)
       pinctrl_spmi_gpio(E) rtc_pm8xxx(E) clk_smd_rpm(E) sdhci_msm(E) sdhci_pltfm(E) qcom_smd_regulator(E) drm(E) smd_rpm(E) qcom_spmi_pmic(E) regmap_spmi(E) ci_hdrc_msm(E) ci_hdrc(E) usb3503(E) extcon_usb_gpio(E) phy_msm_usb(E) udc_core(E) qcom_hwspinlock(E) extcon_core(E) ehci_msm(E) i2c_qup(E) sdhci(E) mmc_core(E) spmi_pmic_arb(E) spmi(E) qcom_smd(E) smsm(E) rpmsg_core(E) smp2p(E) smem(E) hwspinlock_core(E) gpio_keys(E)
      CPU: 2 PID: 551 Comm: irq/150-venus Tainted: P            E   4.12.0+ #1625
      Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc2-00144-ga97bdbdf72-dirty 07/08/2017
      task: ffff800037338000 task.stack: ffff800038e00000
      PC is at hfi_sys_init_done+0x64/0x140 [venus_core]
      LR is at hfi_process_msg_packet+0xcc/0x1e8 [venus_core]
      pc : [<ffff00000118b384>] lr : [<ffff00000118c11c>] pstate: 20400145
      sp : ffff800038e03c60
      x29: ffff800038e03c60 x28: 0000000000000000
      x27: 00000000000df018 x26: ffff00000118f4d0
      x25: 0000000000020003 x24: ffff80003a8d3010
      x23: ffff00000118f760 x22: ffff800037b40028
      x21: ffff8000382981f0 x20: ffff800037b40028
      x19: ffff80003c039000 x18: 0000000000000020
      x17: 0000000000000000 x16: ffff800037338000
      x15: ffffffffffffffff x14: 0000001000000014
      x13: 0000000100001007 x12: 0000000100000020
      x11: 0000100e00000000 x10: 0000000000000001
      x9 : 0000000200000000 x8 : 0000001400000001
      x7 : 0000000000001010 x6 : 0000000000000148
      x5 : 0000000000001009 x4 : ffff80003c039000
      x3 : 00000000cd770abb x2 : 0000000000000042
      x1 : 0000000000000788 x0 : 0000000000000002
      Process irq/150-venus (pid: 551, stack limit = 0xffff800038e00000)
      Call trace:
      [<ffff00000118b384>] hfi_sys_init_done+0x64/0x140 [venus_core]
      [<ffff00000118c11c>] hfi_process_msg_packet+0xcc/0x1e8 [venus_core]
      [<ffff00000118a2b4>] venus_isr_thread+0x1b4/0x208 [venus_core]
      [<ffff00000118e750>] hfi_isr_thread+0x28/0x38 [venus_core]
      [<ffff000008161550>] irq_thread_fn+0x30/0x70
      [<ffff0000081617fc>] irq_thread+0x14c/0x1c8
      [<ffff000008105e68>] kthread+0x138/0x140
      [<ffff000008083590>] ret_from_fork+0x10/0x40
      Code: 52820125 52820207 7a431820 54000249 (b9400263)
      ---[ end trace c963460f20a984b6 ]---
    
    The problem is that in the error case, we've incremented the data ptr
    but not decremented rem_bytes, and keep reading (presumably garbage)
    until eventually we go beyond the end of the buffer.
    
    Instead, on first error, we should probably just bail out.  Other
    option is to increment read_bytes by sizeof(u32) before the switch,
    rather than only accounting for the ptype header in the non-error
    case.  Note that in this case it is HFI_ERR_SYS_INVALID_PARAMETER,
    ie. an unrecognized/unsupported parameter, so interpreting the next
    word as a property type would be bogus.  The other error cases are
    due to truncated buffer, so there isn't likely to be anything valid
    to interpret in the remainder of the buffer.  So just bailing seems
    like a reasonable solution.
    Signed-off-by: NRob Clark <robdclark@gmail.com>
    Reviewed-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
    Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
    Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
    3e7caae5
hfi_msgs.c 26.2 KB