-
由 Quentin Schulz 提交于
The Allwinner SoCs all have an ADC that can also act as a touchscreen controller and a thermal sensor. This patch adds the ADC driver which is based on the MFD for the same SoCs ADC. This also registers the thermal adc channel in the iio map array so iio_hwmon could use it without modifying the Device Tree. This registers the driver in the thermal framework. The thermal sensor requires the IP to be in touchscreen mode to return correct values. Therefore, if the user is continuously reading the ADC channel(s), the thermal framework in which the thermal sensor is registered will switch the IP in touchscreen mode to get a temperature value and requires a delay of 100ms (because of the mode switching), then the ADC will switch back to ADC mode and requires also a delay of 100ms. If the ADC readings are critical to user and the SoC temperature is not, this driver is capable of not registering the thermal sensor in the thermal framework and thus, "quicken" the ADC readings. This driver probes on three different platform_device_id to take into account slight differences (registers bit and temperature computation) between Allwinner SoCs ADCs. Signed-off-by: NQuentin Schulz <quentin.schulz@free-electrons.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NJonathan Cameron <jic23@kernel.org> Acked-for-MFD-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
d1caa990