• S
    powerpc/p3060qds: Add support for P3060QDS board · 96cc017c
    Shengzhou Liu 提交于
    The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
    The P3060 Processor combines six e500mc Power Architecture processor cores with
    high-performance datapath acceleration architecture(DPAA), CoreNet fabric
    infrastructure, as well as network and peripheral interfaces.
    
    P3060QDS Board Overview:
    Memory subsystem:
      - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
      - 128M Bytes NOR flash single-chip memory
      - 16M Bytes SPI flash
      - 8K Bytes AT24C64 I2C EEPROM
    Ethernet:
      - 4x1G + 4x1G/2.5G Ethernet controllers
      - 2xRGMII + 1xMII, three VSC8641 PHYs on board
      - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
    PCIe: Two PCI Express 2.0 controllers/ports
    USB:  Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
    I2C:  Four I2C controllers
    UART: Supports up to four UARTs
    RapidIO: Supports two serial RapidIO ports
    Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
    Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
    96cc017c
corenet32_smp_defconfig 3.8 KB