• L
    PCI: pciehp: Enable/disable exclusively from IRQ thread · 32a8cef2
    Lukas Wunner 提交于
    Besides the IRQ thread, there are several other places in the driver
    which enable or disable the slot:
    
    - pciehp_probe() enables the slot if it's occupied and the pciehp_force
      module parameter is used.
    
    - pciehp_resume() enables or disables the slot after system sleep.
    
    - pciehp_queue_pushbutton_work() enables or disables the slot after the
      5 second delay following an Attention Button press.
    
    - pciehp_sysfs_enable_slot() and pciehp_sysfs_disable_slot() enable or
      disable the slot on sysfs write.
    
    This requires locking and complicates pciehp's state machine.
    
    A simplification can be achieved by enabling and disabling the slot
    exclusively from the IRQ thread.
    
    Amend the functions listed above to request slot enable/disablement from
    the IRQ thread by either synthesizing a Presence Detect Changed event or,
    in the case of a disable user request (via sysfs or an Attention Button
    press), submitting a newly introduced force disable request.  The latter
    is needed because the slot shall be forced off despite being occupied.
    For this force disable request, avoid colliding with Slot Status register
    bits by using a bit number greater than 16.
    
    For synchronous execution of requests (on sysfs write), wait for the
    request to finish and retrieve the result.  There can only ever be one
    sysfs write in flight due to the locking in kernfs_fop_write(), hence
    there is no risk of returning the result of a different sysfs request to
    user space.
    
    The POWERON_STATE and POWEROFF_STATE is now no longer entered by the
    above-listed functions, but solely by the IRQ thread when it begins a
    power transition.  Afterwards, it moves to STATIC_STATE.  The same
    applies to canceling the Attention Button work, it likewise becomes an
    IRQ thread only operation.
    
    An immediate consequence is that the POWERON_STATE and POWEROFF_STATE is
    never observed by the IRQ thread itself, only by functions called in a
    different context, such as pciehp_sysfs_enable_slot().  So remove
    handling of these states from pciehp_handle_button_press() and
    pciehp_handle_link_change() which are exclusively called from the IRQ
    thread.
    Signed-off-by: NLukas Wunner <lukas@wunner.de>
    Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
    32a8cef2
pciehp_ctrl.c 10.1 KB