• C
    mtd: rawnand: qcom: fix memory corruption that causes panic · 1e235ec0
    Christian Lamparter 提交于
    commit 81d9bdf59092e4755fc4307c93c4589ef0fe2e0f upstream.
    
    This patch fixes a memory corruption that occurred in the
    qcom-nandc driver since it was converted to nand_scan().
    
    On boot, an affected device will panic from a NPE at a weird place:
    | Unable to handle kernel NULL pointer dereference at virtual address 0
    | pgd = (ptrval)
    | [00000000] *pgd=00000000
    | Internal error: Oops: 80000005 [#1] SMP ARM
    | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0
    | Hardware name: Generic DT based system
    | PC is at   (null)
    | LR is at nand_block_isbad+0x90/0xa4
    | pc : [<00000000>]    lr : [<c0592240>]    psr: 80000013
    | sp : cf839d40  ip : 00000000  fp : cfae9e20
    | r10: cf815810  r9 : 00000000  r8 : 00000000
    | r7 : 00000000  r6 : 00000000  r5 : 00000001  r4 : cf815810
    | r3 : 00000000  r2 : cfae9810  r1 : ffffffff  r0 : cf815810
    | Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    | Control: 10c5387d  Table: 8020406a  DAC: 00000051
    | Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
    | [<c0592240>] (nand_block_isbad) from [<c0580a94>]
    | [<c0580a94>] (allocate_partition) from [<c05811e4>]
    | [<c05811e4>] (add_mtd_partitions) from [<c0581164>]
    | [<c0581164>] (parse_mtd_partitions) from [<c057def4>]
    | [<c057def4>] (mtd_device_parse_register) from [<c059d274>]
    | [<c059d274>] (qcom_nandc_probe) from [<c0567f00>]
    
    The problem is that the nand_scan()'s qcom_nand_attach_chip callback
    is updating the nandc->max_cwperpage from 1 to 4. This causes the
    sg_init_table of clear_bam_transaction() in the driver's
    qcom_nandc_block_bad() to memset much more than what was initially
    allocated by alloc_bam_transaction().
    
    This patch restores the old behavior by reallocating the shared bam
    transaction alloc_bam_transaction() after the chip was identified,
    but before mtd_device_parse_register() (which is an alias for
    mtd_device_register() - see panic) gets called. This fixes the
    corruption and the driver is working again.
    
    Cc: stable@vger.kernel.org
    Fixes: 6a3cec64 ("mtd: rawnand: qcom: convert driver to nand_scan()")
    Signed-off-by: NChristian Lamparter <chunkeey@gmail.com>
    Acked-by: NMiquel Raynal <miquel.raynal@bootlin.com>
    Signed-off-by: NBoris Brezillon <bbrezillon@kernel.org>
    Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
    1e235ec0
qcom_nandc.c 83.2 KB