Using the PLL in master mode requires using an external connection
between one of the GPIO pins (configured as PLL/4 output) and the
SCK pin. It also requires the external clock to be fed to some other
GPIO pin instead of the SCK pin.

This is described for the PCM5122 chip in the answers to the forum post
"PCM5122 DAC as I2S master troubles with PLL mode" at the TI E2E
community pages (1). The clocking functionality is also much better
described in the datasheet for the chip PCM5242, which seems to be
register compatible with PCM512x and PCM514x (which both have severely
lacking datasheets).

(1) http://e2e.ti.com/support/data_converters/audio_converters/f/64/t/267830Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NMark Brown <broonie@kernel.org>