channel.c 4.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133
/*
 * Copyright (c) 2014 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include "ath9k.h"

/* Set/change channels.  If the channel is really being changed, it's done
 * by reseting the chip.  To accomplish this we must first cleanup any pending
 * DMA, then restart stuff.
 */
static int ath_set_channel(struct ath_softc *sc)
{
	struct ath_hw *ah = sc->sc_ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_hw *hw = sc->hw;
	struct ath9k_channel *hchan;
	struct cfg80211_chan_def *chandef = &sc->cur_chan->chandef;
	struct ieee80211_channel *chan = chandef->chan;
	int pos = chan->hw_value;
	int old_pos = -1;
	int r;

	if (test_bit(ATH_OP_INVALID, &common->op_flags))
		return -EIO;

	if (ah->curchan)
		old_pos = ah->curchan - &ah->channels[0];

	ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
		chan->center_freq, chandef->width);

	/* update survey stats for the old channel before switching */
	spin_lock_bh(&common->cc_lock);
	ath_update_survey_stats(sc);
	spin_unlock_bh(&common->cc_lock);

	ath9k_cmn_get_channel(hw, ah, chandef);

	/* If the operating channel changes, change the survey in-use flags
	 * along with it.
	 * Reset the survey data for the new channel, unless we're switching
	 * back to the operating channel from an off-channel operation.
	 */
	if (!sc->cur_chan->offchannel && sc->cur_survey != &sc->survey[pos]) {
		if (sc->cur_survey)
			sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;

		sc->cur_survey = &sc->survey[pos];

		memset(sc->cur_survey, 0, sizeof(struct survey_info));
		sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
	} else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
		memset(&sc->survey[pos], 0, sizeof(struct survey_info));
	}

	hchan = &sc->sc_ah->channels[pos];
	r = ath_reset_internal(sc, hchan);
	if (r)
		return r;

	/* The most recent snapshot of channel->noisefloor for the old
	 * channel is only available after the hardware reset. Copy it to
	 * the survey stats now.
	 */
	if (old_pos >= 0)
		ath_update_survey_nf(sc, old_pos);

	/* Enable radar pulse detection if on a DFS channel. Spectral
	 * scanning and radar detection can not be used concurrently.
	 */
	if (hw->conf.radar_enabled) {
		u32 rxfilter;

		/* set HW specific DFS configuration */
		ath9k_hw_set_radar_params(ah);
		rxfilter = ath9k_hw_getrxfilter(ah);
		rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
				ATH9K_RX_FILTER_PHYERR;
		ath9k_hw_setrxfilter(ah, rxfilter);
		ath_dbg(common, DFS, "DFS enabled at freq %d\n",
			chan->center_freq);
	} else {
		/* perform spectral scan if requested. */
		if (test_bit(ATH_OP_SCANNING, &common->op_flags) &&
			sc->spectral_mode == SPECTRAL_CHANSCAN)
			ath9k_spectral_scan_trigger(hw);
	}

	return 0;
}

void ath_chanctx_init(struct ath_softc *sc)
{
	struct ath_chanctx *ctx;
	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
	struct ieee80211_supported_band *sband;
	struct ieee80211_channel *chan;
	int i;

	sband = &common->sbands[IEEE80211_BAND_2GHZ];
	if (!sband->n_channels)
		sband = &common->sbands[IEEE80211_BAND_5GHZ];

	chan = &sband->channels[0];
	for (i = 0; i < ATH9K_NUM_CHANCTX; i++) {
		ctx = &sc->chanctx[i];
		cfg80211_chandef_create(&ctx->chandef, chan, NL80211_CHAN_HT20);
		INIT_LIST_HEAD(&ctx->vifs);
	}
	sc->cur_chan = &sc->chanctx[0];
}

int ath_chanctx_set_channel(struct ath_softc *sc, struct ath_chanctx *ctx,
			      struct cfg80211_chan_def *chandef)
{
	memcpy(&ctx->chandef, chandef, sizeof(ctx->chandef));
	if (ctx != sc->cur_chan)
		return 0;

	return ath_set_channel(sc);
}