board-bockw.c 8.9 KB
Newer Older
1 2 3 4 5
/*
 * Bock-W board support
 *
 * Copyright (C) 2013  Renesas Solutions Corp.
 * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
6
 * Copyright (C) 2013  Cogent Embedded, Inc.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

22 23
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
24
#include <linux/mmc/sh_mobile_sdhi.h>
25
#include <linux/mmc/sh_mmcif.h>
26
#include <linux/mtd/partitions.h>
27
#include <linux/pinctrl/machine.h>
28
#include <linux/platform_data/usb-rcar-phy.h>
29
#include <linux/platform_device.h>
30 31
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
32
#include <linux/smsc911x.h>
33 34
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
35
#include <media/soc_camera.h>
36
#include <mach/common.h>
37
#include <mach/irqs.h>
38 39 40
#include <mach/r8a7778.h>
#include <asm/mach/arch.h>

41 42 43 44 45 46 47 48
/*
 *	CN9(Upper side) SCIF/RCAN selection
 *
 *		1,4	3,6
 * SW40		SCIF	RCAN
 * SW41		SCIF	RCAN
 */

49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
/*
 * MMC (CN26) pin
 *
 * SW6	(D2)	3 pin
 * SW7	(D5)	ON
 * SW8	(D3)	3 pin
 * SW10	(D4)	1 pin
 * SW12	(CLK)	1 pin
 * SW13	(D6)	3 pin
 * SW14	(CMD)	ON
 * SW15	(D6)	1 pin
 * SW16	(D0)	ON
 * SW17	(D1)	ON
 * SW18	(D7)	3 pin
 * SW19	(MMC)	1 pin
 */

66 67 68 69 70 71
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
	REGULATOR_SUPPLY("vddvario", "smsc911x"),
	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};

72
static struct smsc911x_platform_config smsc911x_data __initdata = {
73 74 75 76 77 78
	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
	.flags		= SMSC911X_USE_32BIT,
	.phy_interface	= PHY_INTERFACE_MODE_MII,
};

79
static struct resource smsc911x_resources[] __initdata = {
80 81 82 83
	DEFINE_RES_MEM(0x18300000, 0x1000),
	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};

84
/* USB */
85 86 87 88 89
static struct resource usb_phy_resources[] __initdata = {
	DEFINE_RES_MEM(0xffe70800, 0x100),
	DEFINE_RES_MEM(0xffe76000, 0x100),
};

90 91
static struct rcar_phy_platform_data usb_phy_platform_data __initdata;

92
/* SDHI */
93
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
94 95 96 97 98
	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
};

99 100 101 102 103
static struct resource sdhi0_resources[] __initdata = {
	DEFINE_RES_MEM(0xFFE4C000, 0x100),
	DEFINE_RES_IRQ(gic_iid(0x77)),
};

104 105 106 107 108 109 110 111 112 113 114 115 116
static struct sh_eth_plat_data ether_platform_data __initdata = {
	.phy		= 0x01,
	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
	.phy_interface	= PHY_INTERFACE_MODE_RMII,
	/*
	 * Although the LINK signal is available on the board, it's connected to
	 * the link/activity LED output of the PHY, thus the link disappears and
	 * reappears after each packet.  We'd be better off ignoring such signal
	 * and getting the link state from the PHY indirectly.
	 */
	.no_ether_link	= 1,
};

117 118 119 120 121 122 123
/* I2C */
static struct i2c_board_info i2c0_devices[] = {
	{
		I2C_BOARD_INFO("rx8581", 0x51),
	},
};

124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
/* HSPI*/
static struct mtd_partition m25p80_spi_flash_partitions[] = {
	{
		.name	= "data(spi)",
		.size	= 0x0100000,
		.offset	= 0,
	},
};

static struct flash_platform_data spi_flash_data = {
	.name		= "m25p80",
	.type		= "s25fl008k",
	.parts		= m25p80_spi_flash_partitions,
	.nr_parts	= ARRAY_SIZE(m25p80_spi_flash_partitions),
};

static struct spi_board_info spi_board_info[] __initdata = {
	{
		.modalias	= "m25p80",
		.max_speed_hz	= 104000000,
		.chip_select	= 0,
		.bus_num	= 0,
		.mode		= SPI_MODE_0,
		.platform_data	= &spi_flash_data,
	},
};

151
/* MMC */
152 153 154 155 156
static struct resource mmc_resources[] __initdata = {
	DEFINE_RES_MEM(0xffe4e000, 0x100),
	DEFINE_RES_IRQ(gic_iid(0x5d)),
};

157
static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
158 159 160 161 162 163 164
	.sup_pclk	= 0,
	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
	.caps		= MMC_CAP_4_BIT_DATA |
			  MMC_CAP_8_BIT_DATA |
			  MMC_CAP_NEEDS_POLL,
};

165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183
static struct rcar_vin_platform_data vin_platform_data __initdata = {
	.flags	= RCAR_VIN_BT656,
};

/* In the default configuration both decoders reside on I2C bus 0 */
#define BOCKW_CAMERA(idx)						\
static struct i2c_board_info camera##idx##_info = {			\
	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
};									\
									\
static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
	.bus_id		= idx,						\
	.i2c_adapter_id	= 0,						\
	.board_info	= &camera##idx##_info,				\
}

BOCKW_CAMERA(0);
BOCKW_CAMERA(1);

184
static const struct pinctrl_map bockw_pinctrl_map[] = {
185
	/* Ether */
186
	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
187
				  "ether_rmii", "ether"),
188 189 190
	/* HSPI0 */
	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
				  "hspi0_a", "hspi0"),
191 192 193 194 195
	/* MMC */
	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
				  "mmc_data8", "mmc"),
	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
				  "mmc_ctrl", "mmc"),
196 197 198 199 200
	/* SCIF0 */
	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
				  "scif0_data_a", "scif0"),
	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
				  "scif0_ctrl", "scif0"),
201
	/* USB */
202 203 204 205
	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
				  "usb0", "usb0"),
	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
				  "usb1", "usb1"),
206 207
	/* SDHI0 */
	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
208 209 210 211 212 213 214
				  "sdhi0_data4", "sdhi0"),
	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
				  "sdhi0_ctrl", "sdhi0"),
	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
				  "sdhi0_cd", "sdhi0"),
	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
				  "sdhi0_wp", "sdhi0"),
215 216 217 218 219 220 221 222 223 224
	/* VIN0 */
	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
				  "vin0_clk", "vin0"),
	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
				  "vin0_data8", "vin0"),
	/* VIN1 */
	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
				  "vin1_clk", "vin1"),
	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
				  "vin1_data8", "vin1"),
225 226
};

227
#define FPGA	0x18200000
228
#define IRQ0MR	0x30
229 230
#define PFC	0xfffc0000
#define PUPR4	0x110
231 232
static void __init bockw_init(void)
{
233
	void __iomem *base;
234

235
	r8a7778_clock_init();
236
	r8a7778_init_irq_extpin(1);
237
	r8a7778_add_standard_devices();
238
	r8a7778_add_ether_device(&ether_platform_data);
239 240 241 242 243 244 245 246 247 248
	r8a7778_add_vin_device(0, &vin_platform_data);
	/* VIN1 has a pin conflict with Ether */
	if (!IS_ENABLED(CONFIG_SH_ETH))
		r8a7778_add_vin_device(1, &vin_platform_data);
	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
				      &iclink0_ml86v7667,
				      sizeof(iclink0_ml86v7667));
	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
				      &iclink1_ml86v7667,
				      sizeof(iclink1_ml86v7667));
249

250 251
	i2c_register_board_info(0, i2c0_devices,
				ARRAY_SIZE(i2c0_devices));
252 253
	spi_register_board_info(spi_board_info,
				ARRAY_SIZE(spi_board_info));
254 255 256 257
	pinctrl_register_mappings(bockw_pinctrl_map,
				  ARRAY_SIZE(bockw_pinctrl_map));
	r8a7778_pinmux_init();

258 259 260 261 262
	platform_device_register_resndata(
		&platform_bus, "sh_mmcif", -1,
		mmc_resources, ARRAY_SIZE(mmc_resources),
		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));

263 264 265 266 267 268 269 270
	platform_device_register_resndata(
		&platform_bus, "rcar_usb_phy", -1,
		usb_phy_resources,
		ARRAY_SIZE(usb_phy_resources),
		&usb_phy_platform_data,
		sizeof(struct rcar_phy_platform_data));


271
	/* for SMSC */
272 273
	base = ioremap_nocache(FPGA, SZ_1M);
	if (base) {
274 275 276 277 278 279 280
		/*
		 * CAUTION
		 *
		 * IRQ0/1 is cascaded interrupt from FPGA.
		 * it should be cared in the future
		 * Now, it is assuming IRQ0 was used only from SMSC.
		 */
281
		u16 val = ioread16(base + IRQ0MR);
282
		val &= ~(1 << 4); /* enable SMSC911x */
283 284
		iowrite16(val, base + IRQ0MR);
		iounmap(base);
285

286 287
		regulator_register_fixed(0, dummy_supplies,
					 ARRAY_SIZE(dummy_supplies));
288 289 290 291 292 293

		platform_device_register_resndata(
			&platform_bus, "smsc911x", -1,
			smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
			&smsc911x_data, sizeof(smsc911x_data));
	}
294 295 296 297 298 299 300 301 302 303 304 305

	/* for SDHI */
	base = ioremap_nocache(PFC, 0x200);
	if (base) {
		/*
		 * FIXME
		 *
		 * SDHI CD/WP pin needs pull-up
		 */
		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
		iounmap(base);

306 307 308 309
		platform_device_register_resndata(
			&platform_bus, "sh_mobile_sdhi", 0,
			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
			&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
310
	}
311 312 313 314 315 316 317 318 319 320 321 322
}

static const char *bockw_boards_compat_dt[] __initdata = {
	"renesas,bockw",
	NULL,
};

DT_MACHINE_START(BOCKW_DT, "bockw")
	.init_early	= r8a7778_init_delay,
	.init_irq	= r8a7778_init_irq_dt,
	.init_machine	= bockw_init,
	.dt_compat	= bockw_boards_compat_dt,
323
	.init_late      = r8a7778_init_late,
324
MACHINE_END