core.c 27.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
/*
 * Copyright (c) 2005-2011 Atheros Communications Inc.
 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <linux/module.h>
#include <linux/firmware.h>

#include "core.h"
#include "mac.h"
#include "htc.h"
#include "hif.h"
#include "wmi.h"
#include "bmi.h"
#include "debug.h"
#include "htt.h"
K
Kalle Valo 已提交
29
#include "testmode.h"
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

unsigned int ath10k_debug_mask;
static bool uart_print;
static unsigned int ath10k_p2p;
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param(uart_print, bool, 0644);
module_param_named(p2p, ath10k_p2p, uint, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");

static const struct ath10k_hw_params ath10k_hw_params_list[] = {
	{
		.id = QCA988X_HW_2_0_VERSION,
		.name = "qca988x hw2.0",
		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
		.fw = {
			.dir = QCA988X_HW_2_0_FW_DIR,
			.fw = QCA988X_HW_2_0_FW_FILE,
			.otp = QCA988X_HW_2_0_OTP_FILE,
			.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
		},
	},
};

static void ath10k_send_suspend_complete(struct ath10k *ar)
{
57
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n");
58

59
	complete(&ar->target_suspend);
60 61 62 63 64 65 66 67 68 69 70
}

static int ath10k_init_configure_target(struct ath10k *ar)
{
	u32 param_host;
	int ret;

	/* tell target which HTC version it is used*/
	ret = ath10k_bmi_write32(ar, hi_app_host_interest,
				 HTC_PROTOCOL_VERSION);
	if (ret) {
71
		ath10k_err(ar, "settings HTC version failed\n");
72 73 74 75 76 77
		return ret;
	}

	/* set the firmware mode to STA/IBSS/AP */
	ret = ath10k_bmi_read32(ar, hi_option_flag, &param_host);
	if (ret) {
78
		ath10k_err(ar, "setting firmware mode (1/2) failed\n");
79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
		return ret;
	}

	/* TODO following parameters need to be re-visited. */
	/* num_device */
	param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT);
	/* Firmware mode */
	/* FIXME: Why FW_MODE_AP ??.*/
	param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT);
	/* mac_addr_method */
	param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT);
	/* firmware_bridge */
	param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT);
	/* fwsubmode */
	param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT);

	ret = ath10k_bmi_write32(ar, hi_option_flag, param_host);
	if (ret) {
97
		ath10k_err(ar, "setting firmware mode (2/2) failed\n");
98 99 100 101 102 103
		return ret;
	}

	/* We do all byte-swapping on the host */
	ret = ath10k_bmi_write32(ar, hi_be, 0);
	if (ret) {
104
		ath10k_err(ar, "setting host CPU BE mode failed\n");
105 106 107 108 109 110 111
		return ret;
	}

	/* FW descriptor/Data swap flags */
	ret = ath10k_bmi_write32(ar, hi_fw_swap, 0);

	if (ret) {
112
		ath10k_err(ar, "setting FW data/desc swap flags failed\n");
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
		return ret;
	}

	return 0;
}

static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar,
						   const char *dir,
						   const char *file)
{
	char filename[100];
	const struct firmware *fw;
	int ret;

	if (file == NULL)
		return ERR_PTR(-ENOENT);

	if (dir == NULL)
		dir = ".";

	snprintf(filename, sizeof(filename), "%s/%s", dir, file);
	ret = request_firmware(&fw, filename, ar->dev);
	if (ret)
		return ERR_PTR(ret);

	return fw;
}

141
static int ath10k_push_board_ext_data(struct ath10k *ar)
142 143 144 145 146 147 148 149
{
	u32 board_data_size = QCA988X_BOARD_DATA_SZ;
	u32 board_ext_data_size = QCA988X_BOARD_EXT_DATA_SZ;
	u32 board_ext_data_addr;
	int ret;

	ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr);
	if (ret) {
150 151
		ath10k_err(ar, "could not read board ext data addr (%d)\n",
			   ret);
152 153 154
		return ret;
	}

155
	ath10k_dbg(ar, ATH10K_DBG_BOOT,
156
		   "boot push board extended data addr 0x%x\n",
157 158 159 160 161
		   board_ext_data_addr);

	if (board_ext_data_addr == 0)
		return 0;

162
	if (ar->board_len != (board_data_size + board_ext_data_size)) {
163
		ath10k_err(ar, "invalid board (ext) data sizes %zu != %d+%d\n",
164
			   ar->board_len, board_data_size, board_ext_data_size);
165 166 167 168
		return -EINVAL;
	}

	ret = ath10k_bmi_write_memory(ar, board_ext_data_addr,
169
				      ar->board_data + board_data_size,
170 171
				      board_ext_data_size);
	if (ret) {
172
		ath10k_err(ar, "could not write board ext data (%d)\n", ret);
173 174 175 176 177 178
		return ret;
	}

	ret = ath10k_bmi_write32(ar, hi_board_ext_data_config,
				 (board_ext_data_size << 16) | 1);
	if (ret) {
179 180
		ath10k_err(ar, "could not write board ext data bit (%d)\n",
			   ret);
181 182 183 184 185 186 187 188 189 190 191 192
		return ret;
	}

	return 0;
}

static int ath10k_download_board_data(struct ath10k *ar)
{
	u32 board_data_size = QCA988X_BOARD_DATA_SZ;
	u32 address;
	int ret;

193
	ret = ath10k_push_board_ext_data(ar);
194
	if (ret) {
195
		ath10k_err(ar, "could not push board ext data (%d)\n", ret);
196 197 198 199 200
		goto exit;
	}

	ret = ath10k_bmi_read32(ar, hi_board_data, &address);
	if (ret) {
201
		ath10k_err(ar, "could not read board data addr (%d)\n", ret);
202 203 204
		goto exit;
	}

205 206 207
	ret = ath10k_bmi_write_memory(ar, address, ar->board_data,
				      min_t(u32, board_data_size,
					    ar->board_len));
208
	if (ret) {
209
		ath10k_err(ar, "could not write board data (%d)\n", ret);
210 211 212 213 214
		goto exit;
	}

	ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1);
	if (ret) {
215
		ath10k_err(ar, "could not write board data bit (%d)\n", ret);
216 217 218 219 220 221 222 223 224
		goto exit;
	}

exit:
	return ret;
}

static int ath10k_download_and_run_otp(struct ath10k *ar)
{
225
	u32 result, address = ar->hw_params.patch_load_addr;
226 227 228 229
	int ret;

	/* OTP is optional */

K
Kalle Valo 已提交
230
	if (!ar->otp_data || !ar->otp_len) {
231
		ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %p otp_len %zd)!\n",
232
			    ar->otp_data, ar->otp_len);
233
		return 0;
K
Kalle Valo 已提交
234 235
	}

236
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n",
K
Kalle Valo 已提交
237
		   address, ar->otp_len);
238

239
	ret = ath10k_bmi_fast_download(ar, address, ar->otp_data, ar->otp_len);
240
	if (ret) {
241
		ath10k_err(ar, "could not write otp (%d)\n", ret);
K
Kalle Valo 已提交
242
		return ret;
243 244
	}

245
	ret = ath10k_bmi_execute(ar, address, 0, &result);
246
	if (ret) {
247
		ath10k_err(ar, "could not execute otp (%d)\n", ret);
K
Kalle Valo 已提交
248
		return ret;
249 250
	}

251
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
K
Kalle Valo 已提交
252 253

	if (result != 0) {
254
		ath10k_err(ar, "otp calibration failed: %d", result);
K
Kalle Valo 已提交
255 256 257 258
		return -EINVAL;
	}

	return 0;
259 260
}

K
Kalle Valo 已提交
261
static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode)
262
{
K
Kalle Valo 已提交
263 264 265
	u32 address, data_len;
	const char *mode_name;
	const void *data;
266 267 268 269
	int ret;

	address = ar->hw_params.patch_load_addr;

K
Kalle Valo 已提交
270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290
	switch (mode) {
	case ATH10K_FIRMWARE_MODE_NORMAL:
		data = ar->firmware_data;
		data_len = ar->firmware_len;
		mode_name = "normal";
		break;
	case ATH10K_FIRMWARE_MODE_UTF:
		data = ar->testmode.utf->data;
		data_len = ar->testmode.utf->size;
		mode_name = "utf";
		break;
	default:
		ath10k_err(ar, "unknown firmware mode: %d\n", mode);
		return -EINVAL;
	}

	ath10k_dbg(ar, ATH10K_DBG_BOOT,
		   "boot uploading firmware image %p len %d mode %s\n",
		   data, data_len, mode_name);

	ret = ath10k_bmi_fast_download(ar, address, data, data_len);
291
	if (ret) {
K
Kalle Valo 已提交
292 293 294
		ath10k_err(ar, "failed to download %s firmware: %d\n",
			   mode_name, ret);
		return ret;
295 296
	}

297 298 299 300 301
	return ret;
}

static void ath10k_core_free_firmware_files(struct ath10k *ar)
{
302 303
	if (ar->board && !IS_ERR(ar->board))
		release_firmware(ar->board);
304 305 306 307 308 309 310

	if (ar->otp && !IS_ERR(ar->otp))
		release_firmware(ar->otp);

	if (ar->firmware && !IS_ERR(ar->firmware))
		release_firmware(ar->firmware);

311
	ar->board = NULL;
312 313 314
	ar->board_data = NULL;
	ar->board_len = 0;

315
	ar->otp = NULL;
316 317 318
	ar->otp_data = NULL;
	ar->otp_len = 0;

319
	ar->firmware = NULL;
320 321
	ar->firmware_data = NULL;
	ar->firmware_len = 0;
322 323
}

324
static int ath10k_core_fetch_firmware_api_1(struct ath10k *ar)
325 326 327 328
{
	int ret = 0;

	if (ar->hw_params.fw.fw == NULL) {
329
		ath10k_err(ar, "firmware file not defined\n");
330 331 332 333
		return -EINVAL;
	}

	if (ar->hw_params.fw.board == NULL) {
334
		ath10k_err(ar, "board data file not defined");
335 336 337
		return -EINVAL;
	}

338 339 340 341 342
	ar->board = ath10k_fetch_fw_file(ar,
					 ar->hw_params.fw.dir,
					 ar->hw_params.fw.board);
	if (IS_ERR(ar->board)) {
		ret = PTR_ERR(ar->board);
343
		ath10k_err(ar, "could not fetch board data (%d)\n", ret);
344 345 346
		goto err;
	}

347 348 349
	ar->board_data = ar->board->data;
	ar->board_len = ar->board->size;

350 351 352 353 354
	ar->firmware = ath10k_fetch_fw_file(ar,
					    ar->hw_params.fw.dir,
					    ar->hw_params.fw.fw);
	if (IS_ERR(ar->firmware)) {
		ret = PTR_ERR(ar->firmware);
355
		ath10k_err(ar, "could not fetch firmware (%d)\n", ret);
356 357 358
		goto err;
	}

359 360 361
	ar->firmware_data = ar->firmware->data;
	ar->firmware_len = ar->firmware->size;

362 363 364 365 366 367 368 369 370
	/* OTP may be undefined. If so, don't fetch it at all */
	if (ar->hw_params.fw.otp == NULL)
		return 0;

	ar->otp = ath10k_fetch_fw_file(ar,
				       ar->hw_params.fw.dir,
				       ar->hw_params.fw.otp);
	if (IS_ERR(ar->otp)) {
		ret = PTR_ERR(ar->otp);
371
		ath10k_err(ar, "could not fetch otp (%d)\n", ret);
372 373 374
		goto err;
	}

375 376 377
	ar->otp_data = ar->otp->data;
	ar->otp_len = ar->otp->size;

378 379 380 381
	return 0;

err:
	ath10k_core_free_firmware_files(ar);
382 383 384
	return ret;
}

385 386 387 388 389 390 391 392 393 394 395
static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
{
	size_t magic_len, len, ie_len;
	int ie_id, i, index, bit, ret;
	struct ath10k_fw_ie *hdr;
	const u8 *data;
	__le32 *timestamp;

	/* first fetch the firmware file (firmware-*.bin) */
	ar->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, name);
	if (IS_ERR(ar->firmware)) {
396
		ath10k_err(ar, "could not fetch firmware file '%s/%s': %ld\n",
397
			   ar->hw_params.fw.dir, name, PTR_ERR(ar->firmware));
398 399 400 401 402 403 404 405 406 407
		return PTR_ERR(ar->firmware);
	}

	data = ar->firmware->data;
	len = ar->firmware->size;

	/* magic also includes the null byte, check that as well */
	magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1;

	if (len < magic_len) {
408
		ath10k_err(ar, "firmware file '%s/%s' too small to contain magic: %zu\n",
409
			   ar->hw_params.fw.dir, name, len);
410 411
		ret = -EINVAL;
		goto err;
412 413 414
	}

	if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) {
415
		ath10k_err(ar, "invalid firmware magic\n");
416 417
		ret = -EINVAL;
		goto err;
418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436
	}

	/* jump over the padding */
	magic_len = ALIGN(magic_len, 4);

	len -= magic_len;
	data += magic_len;

	/* loop elements */
	while (len > sizeof(struct ath10k_fw_ie)) {
		hdr = (struct ath10k_fw_ie *)data;

		ie_id = le32_to_cpu(hdr->id);
		ie_len = le32_to_cpu(hdr->len);

		len -= sizeof(*hdr);
		data += sizeof(*hdr);

		if (len < ie_len) {
437
			ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n",
438
				   ie_id, len, ie_len);
439 440
			ret = -EINVAL;
			goto err;
441 442 443 444 445 446 447 448 449 450
		}

		switch (ie_id) {
		case ATH10K_FW_IE_FW_VERSION:
			if (ie_len > sizeof(ar->hw->wiphy->fw_version) - 1)
				break;

			memcpy(ar->hw->wiphy->fw_version, data, ie_len);
			ar->hw->wiphy->fw_version[ie_len] = '\0';

451
			ath10k_dbg(ar, ATH10K_DBG_BOOT,
452 453 454 455 456 457 458 459 460
				   "found fw version %s\n",
				    ar->hw->wiphy->fw_version);
			break;
		case ATH10K_FW_IE_TIMESTAMP:
			if (ie_len != sizeof(u32))
				break;

			timestamp = (__le32 *)data;

461
			ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw timestamp %d\n",
462 463 464
				   le32_to_cpup(timestamp));
			break;
		case ATH10K_FW_IE_FEATURES:
465
			ath10k_dbg(ar, ATH10K_DBG_BOOT,
466 467 468 469 470 471 472 473 474 475
				   "found firmware features ie (%zd B)\n",
				   ie_len);

			for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) {
				index = i / 8;
				bit = i % 8;

				if (index == ie_len)
					break;

476
				if (data[index] & (1 << bit)) {
477
					ath10k_dbg(ar, ATH10K_DBG_BOOT,
478 479
						   "Enabling feature bit: %i\n",
						   i);
480
					__set_bit(i, ar->fw_features);
481
				}
482 483
			}

484
			ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "",
485 486 487 488
					ar->fw_features,
					sizeof(ar->fw_features));
			break;
		case ATH10K_FW_IE_FW_IMAGE:
489
			ath10k_dbg(ar, ATH10K_DBG_BOOT,
490 491 492 493 494 495 496 497
				   "found fw image ie (%zd B)\n",
				   ie_len);

			ar->firmware_data = data;
			ar->firmware_len = ie_len;

			break;
		case ATH10K_FW_IE_OTP_IMAGE:
498
			ath10k_dbg(ar, ATH10K_DBG_BOOT,
499 500 501 502 503 504 505 506
				   "found otp image ie (%zd B)\n",
				   ie_len);

			ar->otp_data = data;
			ar->otp_len = ie_len;

			break;
		default:
507
			ath10k_warn(ar, "Unknown FW IE: %u\n",
508 509 510 511 512 513 514 515 516
				    le32_to_cpu(hdr->id));
			break;
		}

		/* jump over the padding */
		ie_len = ALIGN(ie_len, 4);

		len -= ie_len;
		data += ie_len;
517
	}
518 519

	if (!ar->firmware_data || !ar->firmware_len) {
520
		ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n",
521
			    ar->hw_params.fw.dir, name);
522 523 524 525
		ret = -ENOMEDIUM;
		goto err;
	}

526 527
	if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, ar->fw_features) &&
	    !test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) {
528
		ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well");
529 530 531 532
		ret = -EINVAL;
		goto err;
	}

533 534
	/* now fetch the board file */
	if (ar->hw_params.fw.board == NULL) {
535
		ath10k_err(ar, "board data file not defined");
536 537 538 539 540 541 542 543 544
		ret = -EINVAL;
		goto err;
	}

	ar->board = ath10k_fetch_fw_file(ar,
					 ar->hw_params.fw.dir,
					 ar->hw_params.fw.board);
	if (IS_ERR(ar->board)) {
		ret = PTR_ERR(ar->board);
545
		ath10k_err(ar, "could not fetch board data '%s/%s' (%d)\n",
546 547
			   ar->hw_params.fw.dir, ar->hw_params.fw.board,
			   ret);
548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564
		goto err;
	}

	ar->board_data = ar->board->data;
	ar->board_len = ar->board->size;

	return 0;

err:
	ath10k_core_free_firmware_files(ar);
	return ret;
}

static int ath10k_core_fetch_firmware_files(struct ath10k *ar)
{
	int ret;

565
	ar->fw_api = 3;
566
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
567 568 569 570 571

	ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API3_FILE);
	if (ret == 0)
		goto success;

572
	ar->fw_api = 2;
573
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
574

575
	ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API2_FILE);
576 577 578 579
	if (ret == 0)
		goto success;

	ar->fw_api = 1;
580
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
581 582 583 584 585

	ret = ath10k_core_fetch_firmware_api_1(ar);
	if (ret)
		return ret;

586
success:
587
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api);
588 589 590 591

	return 0;
}

K
Kalle Valo 已提交
592 593
static int ath10k_init_download_firmware(struct ath10k *ar,
					 enum ath10k_firmware_mode mode)
594 595 596 597
{
	int ret;

	ret = ath10k_download_board_data(ar);
598
	if (ret) {
599
		ath10k_err(ar, "failed to download board data: %d\n", ret);
600
		return ret;
601
	}
602 603

	ret = ath10k_download_and_run_otp(ar);
604
	if (ret) {
605
		ath10k_err(ar, "failed to run otp: %d\n", ret);
606
		return ret;
607
	}
608

K
Kalle Valo 已提交
609
	ret = ath10k_download_fw(ar, mode);
610
	if (ret) {
611
		ath10k_err(ar, "failed to download firmware: %d\n", ret);
612
		return ret;
613
	}
614 615 616 617 618 619 620 621 622 623 624 625 626 627

	return ret;
}

static int ath10k_init_uart(struct ath10k *ar)
{
	int ret;

	/*
	 * Explicitly setting UART prints to zero as target turns it on
	 * based on scratch registers.
	 */
	ret = ath10k_bmi_write32(ar, hi_serial_enable, 0);
	if (ret) {
628
		ath10k_warn(ar, "could not disable UART prints (%d)\n", ret);
629 630 631
		return ret;
	}

632
	if (!uart_print)
633 634 635 636
		return 0;

	ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7);
	if (ret) {
637
		ath10k_warn(ar, "could not enable UART prints (%d)\n", ret);
638 639 640 641 642
		return ret;
	}

	ret = ath10k_bmi_write32(ar, hi_serial_enable, 1);
	if (ret) {
643
		ath10k_warn(ar, "could not enable UART prints (%d)\n", ret);
644 645 646
		return ret;
	}

647 648 649
	/* Set the UART baud rate to 19200. */
	ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200);
	if (ret) {
650
		ath10k_warn(ar, "could not set the baud rate (%d)\n", ret);
651 652 653
		return ret;
	}

654
	ath10k_info(ar, "UART prints enabled\n");
655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670
	return 0;
}

static int ath10k_init_hw_params(struct ath10k *ar)
{
	const struct ath10k_hw_params *uninitialized_var(hw_params);
	int i;

	for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) {
		hw_params = &ath10k_hw_params_list[i];

		if (hw_params->id == ar->target_version)
			break;
	}

	if (i == ARRAY_SIZE(ath10k_hw_params_list)) {
671
		ath10k_err(ar, "Unsupported hardware version: 0x%x\n",
672 673 674 675 676 677
			   ar->target_version);
		return -EINVAL;
	}

	ar->hw_params = *hw_params;

678
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n",
679
		   ar->hw_params.name, ar->target_version);
680 681 682 683

	return 0;
}

684 685 686 687 688 689 690 691 692
static void ath10k_core_restart(struct work_struct *work)
{
	struct ath10k *ar = container_of(work, struct ath10k, restart_work);

	mutex_lock(&ar->conf_mutex);

	switch (ar->state) {
	case ATH10K_STATE_ON:
		ar->state = ATH10K_STATE_RESTARTING;
693
		ath10k_hif_stop(ar);
694
		ath10k_scan_finish(ar);
695 696 697
		ieee80211_restart_hw(ar->hw);
		break;
	case ATH10K_STATE_OFF:
698 699
		/* this can happen if driver is being unloaded
		 * or if the crash happens during FW probing */
700
		ath10k_warn(ar, "cannot restart a device that hasn't been started\n");
701 702
		break;
	case ATH10K_STATE_RESTARTING:
703 704
		/* hw restart might be requested from multiple places */
		break;
705 706 707 708
	case ATH10K_STATE_RESTARTED:
		ar->state = ATH10K_STATE_WEDGED;
		/* fall through */
	case ATH10K_STATE_WEDGED:
709
		ath10k_warn(ar, "device is wedged, will not restart\n");
710
		break;
K
Kalle Valo 已提交
711 712 713
	case ATH10K_STATE_UTF:
		ath10k_warn(ar, "firmware restart in UTF mode not supported\n");
		break;
714 715 716 717 718
	}

	mutex_unlock(&ar->conf_mutex);
}

K
Kalle Valo 已提交
719
int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
720 721 722
{
	int status;

723 724
	lockdep_assert_held(&ar->conf_mutex);

725 726
	ath10k_bmi_start(ar);

727 728 729 730 731
	if (ath10k_init_configure_target(ar)) {
		status = -EINVAL;
		goto err;
	}

K
Kalle Valo 已提交
732
	status = ath10k_init_download_firmware(ar, mode);
733 734 735 736 737 738 739
	if (status)
		goto err;

	status = ath10k_init_uart(ar);
	if (status)
		goto err;

740 741
	ar->htc.htc_ops.target_send_suspend_complete =
		ath10k_send_suspend_complete;
742

743 744
	status = ath10k_htc_init(ar);
	if (status) {
745
		ath10k_err(ar, "could not init HTC (%d)\n", status);
746 747 748 749 750
		goto err;
	}

	status = ath10k_bmi_done(ar);
	if (status)
751
		goto err;
752 753 754

	status = ath10k_wmi_attach(ar);
	if (status) {
755
		ath10k_err(ar, "WMI attach failed: %d\n", status);
756
		goto err;
757 758
	}

M
Michal Kazior 已提交
759 760
	status = ath10k_htt_init(ar);
	if (status) {
761
		ath10k_err(ar, "failed to init htt: %d\n", status);
M
Michal Kazior 已提交
762 763 764 765 766
		goto err_wmi_detach;
	}

	status = ath10k_htt_tx_alloc(&ar->htt);
	if (status) {
767
		ath10k_err(ar, "failed to alloc htt tx: %d\n", status);
M
Michal Kazior 已提交
768 769 770 771 772
		goto err_wmi_detach;
	}

	status = ath10k_htt_rx_alloc(&ar->htt);
	if (status) {
773
		ath10k_err(ar, "failed to alloc htt rx: %d\n", status);
M
Michal Kazior 已提交
774 775 776
		goto err_htt_tx_detach;
	}

M
Michal Kazior 已提交
777 778
	status = ath10k_hif_start(ar);
	if (status) {
779
		ath10k_err(ar, "could not start HIF: %d\n", status);
M
Michal Kazior 已提交
780
		goto err_htt_rx_detach;
M
Michal Kazior 已提交
781 782 783 784
	}

	status = ath10k_htc_wait_target(&ar->htc);
	if (status) {
785
		ath10k_err(ar, "failed to connect to HTC: %d\n", status);
M
Michal Kazior 已提交
786 787
		goto err_hif_stop;
	}
788

K
Kalle Valo 已提交
789 790 791 792 793 794
	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
		status = ath10k_htt_connect(&ar->htt);
		if (status) {
			ath10k_err(ar, "failed to connect htt (%d)\n", status);
			goto err_hif_stop;
		}
795 796
	}

M
Michal Kazior 已提交
797 798
	status = ath10k_wmi_connect(ar);
	if (status) {
799
		ath10k_err(ar, "could not connect wmi: %d\n", status);
M
Michal Kazior 已提交
800 801 802 803 804
		goto err_hif_stop;
	}

	status = ath10k_htc_start(&ar->htc);
	if (status) {
805
		ath10k_err(ar, "failed to start htc: %d\n", status);
M
Michal Kazior 已提交
806 807 808
		goto err_hif_stop;
	}

K
Kalle Valo 已提交
809 810 811 812 813 814 815
	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
		status = ath10k_wmi_wait_for_service_ready(ar);
		if (status <= 0) {
			ath10k_warn(ar, "wmi service ready event not received");
			status = -ETIMEDOUT;
			goto err_hif_stop;
		}
M
Michal Kazior 已提交
816
	}
817

818
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
819
		   ar->hw->wiphy->fw_version);
820 821 822

	status = ath10k_wmi_cmd_init(ar);
	if (status) {
823 824
		ath10k_err(ar, "could not send WMI init command (%d)\n",
			   status);
M
Michal Kazior 已提交
825
		goto err_hif_stop;
826 827 828 829
	}

	status = ath10k_wmi_wait_for_unified_ready(ar);
	if (status <= 0) {
830
		ath10k_err(ar, "wmi unified ready event not received\n");
831
		status = -ETIMEDOUT;
M
Michal Kazior 已提交
832
		goto err_hif_stop;
833 834
	}

K
Kalle Valo 已提交
835 836 837 838 839 840 841
	/* we don't care about HTT in UTF mode */
	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
		status = ath10k_htt_setup(&ar->htt);
		if (status) {
			ath10k_err(ar, "failed to setup htt: %d\n", status);
			goto err_hif_stop;
		}
M
Michal Kazior 已提交
842
	}
843

844 845
	status = ath10k_debug_start(ar);
	if (status)
M
Michal Kazior 已提交
846
		goto err_hif_stop;
847

848
	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
B
Ben Greear 已提交
849
		ar->free_vdev_map = (1LL << TARGET_10X_NUM_VDEVS) - 1;
850
	else
B
Ben Greear 已提交
851
		ar->free_vdev_map = (1LL << TARGET_NUM_VDEVS) - 1;
852

M
Michal Kazior 已提交
853
	INIT_LIST_HEAD(&ar->arvifs);
854

855 856
	return 0;

M
Michal Kazior 已提交
857 858
err_hif_stop:
	ath10k_hif_stop(ar);
M
Michal Kazior 已提交
859 860 861 862
err_htt_rx_detach:
	ath10k_htt_rx_free(&ar->htt);
err_htt_tx_detach:
	ath10k_htt_tx_free(&ar->htt);
863 864 865 866 867
err_wmi_detach:
	ath10k_wmi_detach(ar);
err:
	return status;
}
868
EXPORT_SYMBOL(ath10k_core_start);
869

870 871 872 873 874 875 876 877
int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
{
	int ret;

	reinit_completion(&ar->target_suspend);

	ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt);
	if (ret) {
878
		ath10k_warn(ar, "could not suspend target (%d)\n", ret);
879 880 881 882 883 884
		return ret;
	}

	ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);

	if (ret == 0) {
885
		ath10k_warn(ar, "suspend timed out - target pause event never came\n");
886 887 888 889 890 891
		return -ETIMEDOUT;
	}

	return 0;
}

892 893
void ath10k_core_stop(struct ath10k *ar)
{
894 895
	lockdep_assert_held(&ar->conf_mutex);

896
	/* try to suspend target */
K
Kalle Valo 已提交
897 898
	if (ar->state != ATH10K_STATE_RESTARTING &&
	    ar->state != ATH10K_STATE_UTF)
899 900
		ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);

901
	ath10k_debug_stop(ar);
M
Michal Kazior 已提交
902 903 904
	ath10k_hif_stop(ar);
	ath10k_htt_tx_free(&ar->htt);
	ath10k_htt_rx_free(&ar->htt);
905 906
	ath10k_wmi_detach(ar);
}
907 908 909 910 911 912 913 914
EXPORT_SYMBOL(ath10k_core_stop);

/* mac80211 manages fw/hw initialization through start/stop hooks. However in
 * order to know what hw capabilities should be advertised to mac80211 it is
 * necessary to load the firmware (and tear it down immediately since start
 * hook will try to init it again) before registering */
static int ath10k_core_probe_fw(struct ath10k *ar)
{
915 916
	struct bmi_target_info target_info;
	int ret = 0;
917 918 919

	ret = ath10k_hif_power_up(ar);
	if (ret) {
920
		ath10k_err(ar, "could not start pci hif (%d)\n", ret);
921 922 923
		return ret;
	}

924 925 926
	memset(&target_info, 0, sizeof(target_info));
	ret = ath10k_bmi_get_target_info(ar, &target_info);
	if (ret) {
927
		ath10k_err(ar, "could not get target info (%d)\n", ret);
928 929 930 931 932 933 934 935 936
		ath10k_hif_power_down(ar);
		return ret;
	}

	ar->target_version = target_info.version;
	ar->hw->wiphy->hw_version = target_info.version;

	ret = ath10k_init_hw_params(ar);
	if (ret) {
937
		ath10k_err(ar, "could not get hw params (%d)\n", ret);
938 939 940 941 942 943
		ath10k_hif_power_down(ar);
		return ret;
	}

	ret = ath10k_core_fetch_firmware_files(ar);
	if (ret) {
944
		ath10k_err(ar, "could not fetch firmware files (%d)\n", ret);
945 946 947 948
		ath10k_hif_power_down(ar);
		return ret;
	}

949 950
	mutex_lock(&ar->conf_mutex);

K
Kalle Valo 已提交
951
	ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
952
	if (ret) {
953
		ath10k_err(ar, "could not init core (%d)\n", ret);
954
		ath10k_core_free_firmware_files(ar);
955
		ath10k_hif_power_down(ar);
956
		mutex_unlock(&ar->conf_mutex);
957 958 959
		return ret;
	}

M
Michal Kazior 已提交
960
	ath10k_print_driver_info(ar);
961
	ath10k_core_stop(ar);
962 963 964

	mutex_unlock(&ar->conf_mutex);

965 966 967
	ath10k_hif_power_down(ar);
	return 0;
}
968

969 970 971 972
static int ath10k_core_check_chip_id(struct ath10k *ar)
{
	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);

973
	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
974 975
		   ar->chip_id, hw_revision);

976 977 978 979 980
	/* Check that we are not using hw1.0 (some of them have same pci id
	 * as hw2.0) before doing anything else as ath10k crashes horribly
	 * due to missing hw1.0 workarounds. */
	switch (hw_revision) {
	case QCA988X_HW_1_0_CHIP_ID_REV:
981
		ath10k_err(ar, "ERROR: qca988x hw1.0 is not supported\n");
982 983 984 985 986 987 988
		return -EOPNOTSUPP;

	case QCA988X_HW_2_0_CHIP_ID_REV:
		/* known hardware revision, continue normally */
		return 0;

	default:
989
		ath10k_warn(ar, "Warning: hardware revision unknown (0x%x), expect problems\n",
990 991 992 993 994 995 996
			    ar->chip_id);
		return 0;
	}

	return 0;
}

997
static void ath10k_core_register_work(struct work_struct *work)
998
{
999
	struct ath10k *ar = container_of(work, struct ath10k, register_work);
1000 1001
	int status;

1002 1003
	status = ath10k_core_probe_fw(ar);
	if (status) {
1004
		ath10k_err(ar, "could not probe fw (%d)\n", status);
1005
		goto err;
1006
	}
1007

1008
	status = ath10k_mac_register(ar);
1009
	if (status) {
1010
		ath10k_err(ar, "could not register to mac80211 (%d)\n", status);
1011
		goto err_release_fw;
1012
	}
1013

1014
	status = ath10k_debug_register(ar);
1015
	if (status) {
1016
		ath10k_err(ar, "unable to initialize debugfs\n");
1017 1018 1019
		goto err_unregister_mac;
	}

1020 1021
	status = ath10k_spectral_create(ar);
	if (status) {
1022
		ath10k_err(ar, "failed to initialize spectral\n");
1023 1024 1025
		goto err_debug_destroy;
	}

1026 1027
	set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
	return;
1028

1029 1030
err_debug_destroy:
	ath10k_debug_destroy(ar);
1031 1032
err_unregister_mac:
	ath10k_mac_unregister(ar);
1033 1034
err_release_fw:
	ath10k_core_free_firmware_files(ar);
1035
err:
1036 1037 1038
	/* TODO: It's probably a good idea to release device from the driver
	 * but calling device_release_driver() here will cause a deadlock.
	 */
1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049
	return;
}

int ath10k_core_register(struct ath10k *ar, u32 chip_id)
{
	int status;

	ar->chip_id = chip_id;

	status = ath10k_core_check_chip_id(ar);
	if (status) {
1050
		ath10k_err(ar, "Unsupported chip id 0x%08x\n", ar->chip_id);
1051 1052 1053 1054 1055 1056
		return status;
	}

	queue_work(ar->workqueue, &ar->register_work);

	return 0;
1057 1058 1059 1060 1061
}
EXPORT_SYMBOL(ath10k_core_register);

void ath10k_core_unregister(struct ath10k *ar)
{
1062 1063 1064 1065 1066
	cancel_work_sync(&ar->register_work);

	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
		return;

1067 1068 1069 1070 1071 1072
	/* Stop spectral before unregistering from mac80211 to remove the
	 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
	 * would be already be free'd recursively, leading to a double free.
	 */
	ath10k_spectral_destroy(ar);

1073 1074 1075 1076
	/* We must unregister from mac80211 before we stop HTC and HIF.
	 * Otherwise we will fail to submit commands to FW and mac80211 will be
	 * unhappy about callback failures. */
	ath10k_mac_unregister(ar);
1077

K
Kalle Valo 已提交
1078 1079
	ath10k_testmode_destroy(ar);

1080
	ath10k_core_free_firmware_files(ar);
1081

1082
	ath10k_debug_unregister(ar);
1083 1084 1085
}
EXPORT_SYMBOL(ath10k_core_unregister);

M
Michal Kazior 已提交
1086
struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
K
Kalle Valo 已提交
1087
				  enum ath10k_bus bus,
1088 1089 1090
				  const struct ath10k_hif_ops *hif_ops)
{
	struct ath10k *ar;
1091
	int ret;
1092

M
Michal Kazior 已提交
1093
	ar = ath10k_mac_create(priv_size);
1094 1095 1096 1097 1098 1099 1100 1101 1102 1103
	if (!ar)
		return NULL;

	ar->ath_common.priv = ar;
	ar->ath_common.hw = ar->hw;

	ar->p2p = !!ath10k_p2p;
	ar->dev = dev;

	ar->hif.ops = hif_ops;
K
Kalle Valo 已提交
1104
	ar->hif.bus = bus;
1105 1106 1107 1108 1109 1110 1111 1112 1113

	init_completion(&ar->scan.started);
	init_completion(&ar->scan.completed);
	init_completion(&ar->scan.on_channel);
	init_completion(&ar->target_suspend);

	init_completion(&ar->install_key_done);
	init_completion(&ar->vdev_setup_done);

1114
	INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work);
1115 1116 1117

	ar->workqueue = create_singlethread_workqueue("ath10k_wq");
	if (!ar->workqueue)
1118
		goto err_free_mac;
1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132

	mutex_init(&ar->conf_mutex);
	spin_lock_init(&ar->data_lock);

	INIT_LIST_HEAD(&ar->peers);
	init_waitqueue_head(&ar->peer_mapping_wq);

	init_completion(&ar->offchan_tx_completed);
	INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work);
	skb_queue_head_init(&ar->offchan_tx_queue);

	INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
	skb_queue_head_init(&ar->wmi_mgmt_tx_queue);

1133
	INIT_WORK(&ar->register_work, ath10k_core_register_work);
1134 1135
	INIT_WORK(&ar->restart_work, ath10k_core_restart);

1136 1137 1138 1139
	ret = ath10k_debug_create(ar);
	if (ret)
		goto err_free_wq;

1140 1141
	return ar;

1142 1143 1144 1145
err_free_wq:
	destroy_workqueue(ar->workqueue);

err_free_mac:
1146
	ath10k_mac_destroy(ar);
1147

1148 1149 1150 1151 1152 1153 1154 1155 1156
	return NULL;
}
EXPORT_SYMBOL(ath10k_core_create);

void ath10k_core_destroy(struct ath10k *ar)
{
	flush_workqueue(ar->workqueue);
	destroy_workqueue(ar->workqueue);

1157
	ath10k_debug_destroy(ar);
1158 1159 1160 1161
	ath10k_mac_destroy(ar);
}
EXPORT_SYMBOL(ath10k_core_destroy);

1162 1163 1164
MODULE_AUTHOR("Qualcomm Atheros");
MODULE_DESCRIPTION("Core module for QCA988X PCIe devices.");
MODULE_LICENSE("Dual BSD/GPL");