axp20x.c 6.8 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258
/*
 * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
 *
 * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
 * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
 * as well as 4 configurable GPIOs.
 *
 * Author: Carlo Caione <carlo@caione.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/mfd/axp20x.h>
#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>

#define AXP20X_OFF	0x80

static const struct regmap_range axp20x_writeable_ranges[] = {
	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
	regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
};

static const struct regmap_range axp20x_volatile_ranges[] = {
	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
};

static const struct regmap_access_table axp20x_writeable_table = {
	.yes_ranges	= axp20x_writeable_ranges,
	.n_yes_ranges	= ARRAY_SIZE(axp20x_writeable_ranges),
};

static const struct regmap_access_table axp20x_volatile_table = {
	.yes_ranges	= axp20x_volatile_ranges,
	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
};

static struct resource axp20x_pek_resources[] = {
	{
		.name	= "PEK_DBR",
		.start	= AXP20X_IRQ_PEK_RIS_EDGE,
		.end	= AXP20X_IRQ_PEK_RIS_EDGE,
		.flags	= IORESOURCE_IRQ,
	}, {
		.name	= "PEK_DBF",
		.start	= AXP20X_IRQ_PEK_FAL_EDGE,
		.end	= AXP20X_IRQ_PEK_FAL_EDGE,
		.flags	= IORESOURCE_IRQ,
	},
};

static const struct regmap_config axp20x_regmap_config = {
	.reg_bits	= 8,
	.val_bits	= 8,
	.wr_table	= &axp20x_writeable_table,
	.volatile_table	= &axp20x_volatile_table,
	.max_register	= AXP20X_FG_RES,
	.cache_type	= REGCACHE_RBTREE,
};

#define AXP20X_IRQ(_irq, _off, _mask) \
	[AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }

static const struct regmap_irq axp20x_regmap_irqs[] = {
	AXP20X_IRQ(ACIN_OVER_V,		0, 7),
	AXP20X_IRQ(ACIN_PLUGIN,		0, 6),
	AXP20X_IRQ(ACIN_REMOVAL,	0, 5),
	AXP20X_IRQ(VBUS_OVER_V,		0, 4),
	AXP20X_IRQ(VBUS_PLUGIN,		0, 3),
	AXP20X_IRQ(VBUS_REMOVAL,	0, 2),
	AXP20X_IRQ(VBUS_V_LOW,		0, 1),
	AXP20X_IRQ(BATT_PLUGIN,		1, 7),
	AXP20X_IRQ(BATT_REMOVAL,	1, 6),
	AXP20X_IRQ(BATT_ENT_ACT_MODE,	1, 5),
	AXP20X_IRQ(BATT_EXIT_ACT_MODE,	1, 4),
	AXP20X_IRQ(CHARG,		1, 3),
	AXP20X_IRQ(CHARG_DONE,		1, 2),
	AXP20X_IRQ(BATT_TEMP_HIGH,	1, 1),
	AXP20X_IRQ(BATT_TEMP_LOW,	1, 0),
	AXP20X_IRQ(DIE_TEMP_HIGH,	2, 7),
	AXP20X_IRQ(CHARG_I_LOW,		2, 6),
	AXP20X_IRQ(DCDC1_V_LONG,	2, 5),
	AXP20X_IRQ(DCDC2_V_LONG,	2, 4),
	AXP20X_IRQ(DCDC3_V_LONG,	2, 3),
	AXP20X_IRQ(PEK_SHORT,		2, 1),
	AXP20X_IRQ(PEK_LONG,		2, 0),
	AXP20X_IRQ(N_OE_PWR_ON,		3, 7),
	AXP20X_IRQ(N_OE_PWR_OFF,	3, 6),
	AXP20X_IRQ(VBUS_VALID,		3, 5),
	AXP20X_IRQ(VBUS_NOT_VALID,	3, 4),
	AXP20X_IRQ(VBUS_SESS_VALID,	3, 3),
	AXP20X_IRQ(VBUS_SESS_END,	3, 2),
	AXP20X_IRQ(LOW_PWR_LVL1,	3, 1),
	AXP20X_IRQ(LOW_PWR_LVL2,	3, 0),
	AXP20X_IRQ(TIMER,		4, 7),
	AXP20X_IRQ(PEK_RIS_EDGE,	4, 6),
	AXP20X_IRQ(PEK_FAL_EDGE,	4, 5),
	AXP20X_IRQ(GPIO3_INPUT,		4, 3),
	AXP20X_IRQ(GPIO2_INPUT,		4, 2),
	AXP20X_IRQ(GPIO1_INPUT,		4, 1),
	AXP20X_IRQ(GPIO0_INPUT,		4, 0),
};

static const struct of_device_id axp20x_of_match[] = {
	{ .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
	{ .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
	{ },
};
MODULE_DEVICE_TABLE(of, axp20x_of_match);

/*
 * This is useless for OF-enabled devices, but it is needed by I2C subsystem
 */
static const struct i2c_device_id axp20x_i2c_id[] = {
	{ },
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);

static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
	.name			= "axp20x_irq_chip",
	.status_base		= AXP20X_IRQ1_STATE,
	.ack_base		= AXP20X_IRQ1_STATE,
	.mask_base		= AXP20X_IRQ1_EN,
	.num_regs		= 5,
	.irqs			= axp20x_regmap_irqs,
	.num_irqs		= ARRAY_SIZE(axp20x_regmap_irqs),
	.mask_invert		= true,
	.init_ack_masked	= true,
};

static const char * const axp20x_supplies[] = {
	"acin",
	"vin2",
	"vin3",
	"ldo24in",
	"ldo3in",
	"ldo5in",
};

static struct mfd_cell axp20x_cells[] = {
	{
		.name			= "axp20x-pek",
		.num_resources		= ARRAY_SIZE(axp20x_pek_resources),
		.resources		= axp20x_pek_resources,
	}, {
		.name			= "axp20x-regulator",
		.parent_supplies	= axp20x_supplies,
		.num_parent_supplies	= ARRAY_SIZE(axp20x_supplies),
	},
};

static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
	regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
		     AXP20X_OFF);
}

static int axp20x_i2c_probe(struct i2c_client *i2c,
			 const struct i2c_device_id *id)
{
	struct axp20x_dev *axp20x;
	const struct of_device_id *of_id;
	int ret;

	axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
	if (!axp20x)
		return -ENOMEM;

	of_id = of_match_device(axp20x_of_match, &i2c->dev);
	if (!of_id) {
		dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
		return -ENODEV;
	}
	axp20x->variant = (long) of_id->data;

	axp20x->i2c_client = i2c;
	axp20x->dev = &i2c->dev;
	dev_set_drvdata(axp20x->dev, axp20x);

	axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
	if (IS_ERR(axp20x->regmap)) {
		ret = PTR_ERR(axp20x->regmap);
		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
		return ret;
	}

	ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
				  IRQF_ONESHOT | IRQF_SHARED, -1,
				  &axp20x_regmap_irq_chip,
				  &axp20x->regmap_irqc);
	if (ret) {
		dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
		return ret;
	}

	ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
			      ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);

	if (ret) {
		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
		regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
		return ret;
	}

	if (!pm_power_off) {
		axp20x_pm_power_off = axp20x;
		pm_power_off = axp20x_power_off;
	}

	dev_info(&i2c->dev, "AXP20X driver loaded\n");

	return 0;
}

static int axp20x_i2c_remove(struct i2c_client *i2c)
{
	struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);

	if (axp20x == axp20x_pm_power_off) {
		axp20x_pm_power_off = NULL;
		pm_power_off = NULL;
	}

	mfd_remove_devices(axp20x->dev);
	regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);

	return 0;
}

static struct i2c_driver axp20x_i2c_driver = {
	.driver = {
		.name	= "axp20x",
		.owner	= THIS_MODULE,
		.of_match_table	= of_match_ptr(axp20x_of_match),
	},
	.probe		= axp20x_i2c_probe,
	.remove		= axp20x_i2c_remove,
	.id_table	= axp20x_i2c_id,
};

module_i2c_driver(axp20x_i2c_driver);

MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_LICENSE("GPL");