ad5686.c 9.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11
/*
 * AD5686R, AD5685R, AD5684R Digital to analog converters  driver
 *
 * Copyright 2011 Analog Devices Inc.
 *
 * Licensed under the GPL-2.
 */

#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/device.h>
12
#include <linux/module.h>
13 14 15 16 17 18
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/regulator/consumer.h>

19 20
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
21 22 23 24 25 26

#define AD5686_DAC_CHANNELS			4

#define AD5686_ADDR(x)				((x) << 16)
#define AD5686_CMD(x)				((x) << 20)

27
#define AD5686_ADDR_DAC(chan)		(0x1 << (chan))
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
#define AD5686_ADDR_ALL_DAC			0xF

#define AD5686_CMD_NOOP				0x0
#define AD5686_CMD_WRITE_INPUT_N		0x1
#define AD5686_CMD_UPDATE_DAC_N			0x2
#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N	0x3
#define AD5686_CMD_POWERDOWN_DAC		0x4
#define AD5686_CMD_LDAC_MASK			0x5
#define AD5686_CMD_RESET			0x6
#define AD5686_CMD_INTERNAL_REFER_SETUP		0x7
#define AD5686_CMD_DAISY_CHAIN_ENABLE		0x8
#define AD5686_CMD_READBACK_ENABLE		0x9

#define AD5686_LDAC_PWRDN_NONE			0x0
#define AD5686_LDAC_PWRDN_1K			0x1
#define AD5686_LDAC_PWRDN_100K			0x2
#define AD5686_LDAC_PWRDN_3STATE		0x3

/**
 * struct ad5686_chip_info - chip specific information
 * @int_vref_mv:	AD5620/40/60: the internal reference voltage
 * @channel:		channel specification
*/

struct ad5686_chip_info {
	u16				int_vref_mv;
	struct iio_chan_spec		channel[AD5686_DAC_CHANNELS];
};

/**
 * struct ad5446_state - driver instance specific data
 * @spi:		spi_device
 * @chip_info:		chip model specific constants, available modes etc
 * @reg:		supply regulator
 * @vref_mv:		actual reference voltage used
 * @pwr_down_mask:	power down mask
 * @pwr_down_mode:	current power down mode
 * @data:		spi transfer buffers
 */

struct ad5686_state {
	struct spi_device		*spi;
	const struct ad5686_chip_info	*chip_info;
	struct regulator		*reg;
	unsigned short			vref_mv;
	unsigned			pwr_down_mask;
	unsigned			pwr_down_mode;
	/*
	 * DMA (thus cache coherency maintenance) requires the
	 * transfer buffers to live in their own cache lines.
	 */

	union {
		u32 d32;
		u8 d8[4];
	} data[3] ____cacheline_aligned;
};

/**
 * ad5686_supported_device_ids:
 */

enum ad5686_supported_device_ids {
	ID_AD5684,
	ID_AD5685,
	ID_AD5686,
};
static int ad5686_spi_write(struct ad5686_state *st,
			     u8 cmd, u8 addr, u16 val, u8 shift)
{
	val <<= shift;

	st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
			      AD5686_ADDR(addr) |
			      val);

	return spi_write(st->spi, &st->data[0].d8[1], 3);
}

static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
{
	struct spi_transfer t[] = {
		{
			.tx_buf = &st->data[0].d8[1],
			.len = 3,
			.cs_change = 1,
		}, {
			.tx_buf = &st->data[1].d8[1],
			.rx_buf = &st->data[2].d8[1],
			.len = 3,
		},
	};
	int ret;

	st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) |
			      AD5686_ADDR(addr));
	st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP));

126
	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
127 128 129 130 131 132
	if (ret < 0)
		return ret;

	return be32_to_cpu(st->data[2].d32);
}

133 134 135 136 137 138 139 140
static const char * const ad5686_powerdown_modes[] = {
	"1kohm_to_gnd",
	"100kohm_to_gnd",
	"three_state"
};

static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev,
	const struct iio_chan_spec *chan)
141 142 143
{
	struct ad5686_state *st = iio_priv(indio_dev);

144
	return ((st->pwr_down_mode >> (chan->channel * 2)) & 0x3) - 1;
145 146
}

147 148
static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev,
	const struct iio_chan_spec *chan, unsigned int mode)
149 150 151
{
	struct ad5686_state *st = iio_priv(indio_dev);

152 153
	st->pwr_down_mode &= ~(0x3 << (chan->channel * 2));
	st->pwr_down_mode |= ((mode + 1) << (chan->channel * 2));
154

155
	return 0;
156 157
}

158 159 160 161 162 163 164 165 166
static const struct iio_enum ad5686_powerdown_mode_enum = {
	.items = ad5686_powerdown_modes,
	.num_items = ARRAY_SIZE(ad5686_powerdown_modes),
	.get = ad5686_get_powerdown_mode,
	.set = ad5686_set_powerdown_mode,
};

static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev,
	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
167 168 169 170
{
	struct ad5686_state *st = iio_priv(indio_dev);

	return sprintf(buf, "%d\n", !!(st->pwr_down_mask &
171
			(0x3 << (chan->channel * 2))));
172 173
}

174 175 176
static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
	 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
	 size_t len)
177 178 179 180 181 182 183 184 185
{
	bool readin;
	int ret;
	struct ad5686_state *st = iio_priv(indio_dev);

	ret = strtobool(buf, &readin);
	if (ret)
		return ret;

186
	if (readin)
187
		st->pwr_down_mask |= (0x3 << (chan->channel * 2));
188
	else
189
		st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207

	ret = ad5686_spi_write(st, AD5686_CMD_POWERDOWN_DAC, 0,
			       st->pwr_down_mask & st->pwr_down_mode, 0);

	return ret ? ret : len;
}

static int ad5686_read_raw(struct iio_dev *indio_dev,
			   struct iio_chan_spec const *chan,
			   int *val,
			   int *val2,
			   long m)
{
	struct ad5686_state *st = iio_priv(indio_dev);
	unsigned long scale_uv;
	int ret;

	switch (m) {
208
	case IIO_CHAN_INFO_RAW:
209 210 211 212 213 214 215 216
		mutex_lock(&indio_dev->mlock);
		ret = ad5686_spi_read(st, chan->address);
		mutex_unlock(&indio_dev->mlock);
		if (ret < 0)
			return ret;
		*val = ret;
		return IIO_VAL_INT;
		break;
217
	case IIO_CHAN_INFO_SCALE:
218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237
		scale_uv = (st->vref_mv * 100000)
			>> (chan->scan_type.realbits);
		*val =  scale_uv / 100000;
		*val2 = (scale_uv % 100000) * 10;
		return IIO_VAL_INT_PLUS_MICRO;

	}
	return -EINVAL;
}

static int ad5686_write_raw(struct iio_dev *indio_dev,
			       struct iio_chan_spec const *chan,
			       int val,
			       int val2,
			       long mask)
{
	struct ad5686_state *st = iio_priv(indio_dev);
	int ret;

	switch (mask) {
238
	case IIO_CHAN_INFO_RAW:
239
		if (val > (1 << chan->scan_type.realbits) || val < 0)
240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262
			return -EINVAL;

		mutex_lock(&indio_dev->mlock);
		ret = ad5686_spi_write(st,
				 AD5686_CMD_WRITE_INPUT_N_UPDATE_N,
				 chan->address,
				 val,
				 chan->scan_type.shift);
		mutex_unlock(&indio_dev->mlock);
		break;
	default:
		ret = -EINVAL;
	}

	return ret;
}

static const struct iio_info ad5686_info = {
	.read_raw = ad5686_read_raw,
	.write_raw = ad5686_write_raw,
	.driver_module = THIS_MODULE,
};

263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310
static const struct iio_chan_spec_ext_info ad5686_ext_info[] = {
	{
		.name = "powerdown",
		.read = ad5686_read_dac_powerdown,
		.write = ad5686_write_dac_powerdown,
	},
	IIO_ENUM("powerdown_mode", false, &ad5686_powerdown_mode_enum),
	IIO_ENUM_AVAILABLE("powerdown_mode", &ad5686_powerdown_mode_enum),
	{ },
};

#define AD5868_CHANNEL(chan, bits, shift) {			\
		.type = IIO_VOLTAGE,				\
		.indexed = 1,					\
		.output = 1,					\
		.channel = chan,				\
		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
		IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
		.address = AD5686_ADDR_DAC(chan),			\
		.scan_type = IIO_ST('u', bits, 16, shift),	\
		.ext_info = ad5686_ext_info,			\
}

static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
	[ID_AD5684] = {
		.channel[0] = AD5868_CHANNEL(0, 12, 4),
		.channel[1] = AD5868_CHANNEL(1, 12, 4),
		.channel[2] = AD5868_CHANNEL(2, 12, 4),
		.channel[3] = AD5868_CHANNEL(3, 12, 4),
		.int_vref_mv = 2500,
	},
	[ID_AD5685] = {
		.channel[0] = AD5868_CHANNEL(0, 14, 2),
		.channel[1] = AD5868_CHANNEL(1, 14, 2),
		.channel[2] = AD5868_CHANNEL(2, 14, 2),
		.channel[3] = AD5868_CHANNEL(3, 14, 2),
		.int_vref_mv = 2500,
	},
	[ID_AD5686] = {
		.channel[0] = AD5868_CHANNEL(0, 16, 0),
		.channel[1] = AD5868_CHANNEL(1, 16, 0),
		.channel[2] = AD5868_CHANNEL(2, 16, 0),
		.channel[3] = AD5868_CHANNEL(3, 16, 0),
		.int_vref_mv = 2500,
	},
};


311
static int ad5686_probe(struct spi_device *spi)
312 313 314 315 316
{
	struct ad5686_state *st;
	struct iio_dev *indio_dev;
	int ret, regdone = 0, voltage_uv = 0;

317
	indio_dev = iio_device_alloc(sizeof(*st));
318 319 320 321 322 323 324 325 326 327 328 329
	if (indio_dev == NULL)
		return  -ENOMEM;

	st = iio_priv(indio_dev);
	spi_set_drvdata(spi, indio_dev);

	st->reg = regulator_get(&spi->dev, "vcc");
	if (!IS_ERR(st->reg)) {
		ret = regulator_enable(st->reg);
		if (ret)
			goto error_put_reg;

330 331 332 333 334
		ret = regulator_get_voltage(st->reg);
		if (ret < 0)
			goto error_disable_reg;

		voltage_uv = ret;
335 336 337 338 339 340 341 342 343 344 345 346
	}

	st->chip_info =
		&ad5686_chip_info_tbl[spi_get_device_id(spi)->driver_data];

	if (voltage_uv)
		st->vref_mv = voltage_uv / 1000;
	else
		st->vref_mv = st->chip_info->int_vref_mv;

	st->spi = spi;

347 348 349
	/* Set all the power down mode for all channels to 1K pulldown */
	st->pwr_down_mode = 0x55;

350 351 352 353 354 355 356 357 358 359 360 361 362
	indio_dev->dev.parent = &spi->dev;
	indio_dev->name = spi_get_device_id(spi)->name;
	indio_dev->info = &ad5686_info;
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->channels = st->chip_info->channel;
	indio_dev->num_channels = AD5686_DAC_CHANNELS;

	regdone = 1;
	ret = ad5686_spi_write(st, AD5686_CMD_INTERNAL_REFER_SETUP, 0,
				!!voltage_uv, 0);
	if (ret)
		goto error_disable_reg;

363 364 365 366
	ret = iio_device_register(indio_dev);
	if (ret)
		goto error_disable_reg;

367 368 369 370 371 372 373 374 375
	return 0;

error_disable_reg:
	if (!IS_ERR(st->reg))
		regulator_disable(st->reg);
error_put_reg:
	if (!IS_ERR(st->reg))
		regulator_put(st->reg);

376
	iio_device_free(indio_dev);
377 378 379 380

	return ret;
}

381
static int ad5686_remove(struct spi_device *spi)
382 383 384 385
{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);
	struct ad5686_state *st = iio_priv(indio_dev);

386
	iio_device_unregister(indio_dev);
387 388 389
	if (!IS_ERR(st->reg)) {
		regulator_disable(st->reg);
		regulator_put(st->reg);
390
	}
391
	iio_device_free(indio_dev);
392 393 394 395 396 397 398 399 400 401

	return 0;
}

static const struct spi_device_id ad5686_id[] = {
	{"ad5684", ID_AD5684},
	{"ad5685", ID_AD5685},
	{"ad5686", ID_AD5686},
	{}
};
402
MODULE_DEVICE_TABLE(spi, ad5686_id);
403 404 405 406 407 408 409

static struct spi_driver ad5686_driver = {
	.driver = {
		   .name = "ad5686",
		   .owner = THIS_MODULE,
		   },
	.probe = ad5686_probe,
410
	.remove = ad5686_remove,
411 412
	.id_table = ad5686_id,
};
413
module_spi_driver(ad5686_driver);
414 415 416 417

MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("Analog Devices AD5686/85/84 DAC");
MODULE_LICENSE("GPL v2");