au1xxx-ide.c 18.6 KB
Newer Older
P
Pete Popov 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
/*
 * linux/drivers/ide/mips/au1xxx-ide.c  version 01.30.00        Aug. 02 2005
 *
 * BRIEF MODULE DESCRIPTION
 * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
 *
 * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any later
 * version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
 *       Interface and Linux Device Driver" Application Note.
 */
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
J
Jordan Crouse 已提交
36 37
#include <linux/platform_device.h>

P
Pete Popov 已提交
38 39 40 41 42 43
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/sysdev.h>

#include <linux/dma-mapping.h>

J
Jordan Crouse 已提交
44 45
#include "ide-timing.h"

P
Pete Popov 已提交
46 47 48 49 50 51 52 53
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>

#include <asm/mach-au1x00/au1xxx_ide.h>

#define DRV_NAME	"au1200-ide"
#define DRV_VERSION	"1.0"
J
Jordan Crouse 已提交
54
#define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
P
Pete Popov 已提交
55

J
Jordan Crouse 已提交
56 57
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE	1
P
Pete Popov 已提交
58

J
Jordan Crouse 已提交
59 60
static _auide_hwif auide_hwif;
static int dbdma_init_done;
P
Pete Popov 已提交
61 62 63

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)

J
Jordan Crouse 已提交
64
void auide_insw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
65
{
J
Jordan Crouse 已提交
66 67 68
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
69

J
Jordan Crouse 已提交
70 71 72 73 74 75 76 77 78 79
	if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
			   DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->rx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
80 81
}

J
Jordan Crouse 已提交
82
void auide_outsw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
83
{
J
Jordan Crouse 已提交
84 85 86
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
87

J
Jordan Crouse 已提交
88 89 90 91 92 93 94 95 96 97
	if(!put_source_flags(ahwif->tx_chan, (void*)addr,
			     count << 1, DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->tx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
98 99 100 101
}

#endif

102
static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
P
Pete Popov 已提交
103
{
104
	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
J
Jordan Crouse 已提交
105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161

	/* set pio mode! */
	switch(pio) {
	case 0:
		mem_sttime = SBC_IDE_TIMING(PIO0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
		break;

	case 1:
		mem_sttime = SBC_IDE_TIMING(PIO1);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
		break;

	case 2:
		mem_sttime = SBC_IDE_TIMING(PIO2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
		break;

	case 3:
		mem_sttime = SBC_IDE_TIMING(PIO3);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;

		break;

	case 4:
		mem_sttime = SBC_IDE_TIMING(PIO4);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
		break;
	}

	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
162 163
}

164
static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
P
Pete Popov 已提交
165
{
166
	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
P
Pete Popov 已提交
167

J
Jordan Crouse 已提交
168
	switch(speed) {
P
Pete Popov 已提交
169
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199
	case XFER_MW_DMA_2:
		mem_sttime = SBC_IDE_TIMING(MDMA2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;

		break;
	case XFER_MW_DMA_1:
		mem_sttime = SBC_IDE_TIMING(MDMA1);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;

		break;
	case XFER_MW_DMA_0:
		mem_sttime = SBC_IDE_TIMING(MDMA0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;

		break;
P
Pete Popov 已提交
200
#endif
J
Jordan Crouse 已提交
201
	}
202

J
Jordan Crouse 已提交
203 204
	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
205 206 207 208 209 210
}

/*
 * Multi-Word DMA + DbDMA functions
 */

J
Jordan Crouse 已提交
211
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
P
Pete Popov 已提交
212 213 214

static int auide_build_sglist(ide_drive_t *drive,  struct request *rq)
{
J
Jordan Crouse 已提交
215 216 217
	ide_hwif_t *hwif = drive->hwif;
	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg = hwif->sg_table;
P
Pete Popov 已提交
218

J
Jordan Crouse 已提交
219
	ide_map_sg(drive, rq);
P
Pete Popov 已提交
220

J
Jordan Crouse 已提交
221 222 223 224
	if (rq_data_dir(rq) == READ)
		hwif->sg_dma_direction = DMA_FROM_DEVICE;
	else
		hwif->sg_dma_direction = DMA_TO_DEVICE;
P
Pete Popov 已提交
225

J
Jordan Crouse 已提交
226 227
	return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
			  hwif->sg_dma_direction);
P
Pete Popov 已提交
228 229 230 231
}

static int auide_build_dmatable(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276
	int i, iswrite, count = 0;
	ide_hwif_t *hwif = HWIF(drive);

	struct request *rq = HWGROUP(drive)->rq;

	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg;

	iswrite = (rq_data_dir(rq) == WRITE);
	/* Save for interrupt context */
	ahwif->drive = drive;

	/* Build sglist */
	hwif->sg_nents = i = auide_build_sglist(drive, rq);

	if (!i)
		return 0;

	/* fill the descriptors */
	sg = hwif->sg_table;
	while (i && sg_dma_len(sg)) {
		u32 cur_addr;
		u32 cur_len;

		cur_addr = sg_dma_address(sg);
		cur_len = sg_dma_len(sg);

		while (cur_len) {
			u32 flags = DDMA_FLAGS_NOIE;
			unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;

			if (++count >= PRD_ENTRIES) {
				printk(KERN_WARNING "%s: DMA table too small\n",
				       drive->name);
				goto use_pio_instead;
			}

			/* Lets enable intr for the last descriptor only */
			if (1==i)
				flags = DDMA_FLAGS_IE;
			else
				flags = DDMA_FLAGS_NOIE;

			if (iswrite) {
				if(!put_source_flags(ahwif->tx_chan, 
J
Jens Axboe 已提交
277
						     (void*) sg_virt(sg),
J
Jordan Crouse 已提交
278 279 280
						     tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
281
				}
J
Jordan Crouse 已提交
282
			} else 
P
Pete Popov 已提交
283
			{
J
Jordan Crouse 已提交
284
				if(!put_dest_flags(ahwif->rx_chan, 
J
Jens Axboe 已提交
285
						   (void*) sg_virt(sg),
J
Jordan Crouse 已提交
286 287 288
						   tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
289
				}
J
Jordan Crouse 已提交
290
			}
P
Pete Popov 已提交
291

J
Jordan Crouse 已提交
292 293 294
			cur_addr += tc;
			cur_len -= tc;
		}
J
Jens Axboe 已提交
295
		sg = sg_next(sg);
J
Jordan Crouse 已提交
296 297
		i--;
	}
P
Pete Popov 已提交
298

J
Jordan Crouse 已提交
299 300
	if (count)
		return 1;
P
Pete Popov 已提交
301

J
Jordan Crouse 已提交
302 303 304 305 306
 use_pio_instead:
	dma_unmap_sg(ahwif->dev,
		     hwif->sg_table,
		     hwif->sg_nents,
		     hwif->sg_dma_direction);
P
Pete Popov 已提交
307

J
Jordan Crouse 已提交
308
	return 0; /* revert to PIO for this request */
P
Pete Popov 已提交
309 310 311 312
}

static int auide_dma_end(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
313 314
	ide_hwif_t *hwif = HWIF(drive);
	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
P
Pete Popov 已提交
315

J
Jordan Crouse 已提交
316 317 318 319 320
	if (hwif->sg_nents) {
		dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
			     hwif->sg_dma_direction);
		hwif->sg_nents = 0;
	}
P
Pete Popov 已提交
321

J
Jordan Crouse 已提交
322
	return 0;
P
Pete Popov 已提交
323 324 325 326 327 328 329 330 331
}

static void auide_dma_start(ide_drive_t *drive )
{
}


static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
J
Jordan Crouse 已提交
332 333 334
	/* issue cmd to drive */
	ide_execute_command(drive, command, &ide_dma_intr,
			    (2*WAIT_CMD), NULL);
P
Pete Popov 已提交
335 336 337
}

static int auide_dma_setup(ide_drive_t *drive)
J
Jordan Crouse 已提交
338 339
{       	
	struct request *rq = HWGROUP(drive)->rq;
P
Pete Popov 已提交
340

J
Jordan Crouse 已提交
341 342 343 344
	if (!auide_build_dmatable(drive)) {
		ide_map_sg(drive, rq);
		return 1;
	}
P
Pete Popov 已提交
345

J
Jordan Crouse 已提交
346 347
	drive->waiting_for_dma = 1;
	return 0;
P
Pete Popov 已提交
348 349
}

350
static u8 auide_mdma_filter(ide_drive_t *drive)
P
Pete Popov 已提交
351
{
352 353 354 355 356 357 358 359
	/*
	 * FIXME: ->white_list and ->black_list are based on completely bogus
	 * ->ide_dma_check implementation which didn't set neither the host
	 * controller timings nor the device for the desired transfer mode.
	 *
	 * They should be either removed or 0x00 MWDMA mask should be
	 * returned for devices on the ->black_list.
	 */
J
Jordan Crouse 已提交
360

361
	if (dbdma_init_done == 0) {
J
Jordan Crouse 已提交
362 363 364 365 366 367 368 369
		auide_hwif.white_list = ide_in_drive_list(drive->id,
							  dma_white_list);
		auide_hwif.black_list = ide_in_drive_list(drive->id,
							  dma_black_list);
		auide_hwif.drive = drive;
		auide_ddma_init(&auide_hwif);
		dbdma_init_done = 1;
	}
P
Pete Popov 已提交
370

J
Jordan Crouse 已提交
371
	/* Is the drive in our DMA black list? */
372
	if (auide_hwif.black_list)
J
Jordan Crouse 已提交
373
		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
374
				    drive->name, drive->id->model);
J
Jordan Crouse 已提交
375

376 377 378
	return drive->hwif->mwdma_mask;
}

P
Pete Popov 已提交
379
static int auide_dma_test_irq(ide_drive_t *drive)
J
Jordan Crouse 已提交
380 381 382
{	
	if (drive->waiting_for_dma == 0)
		printk(KERN_WARNING "%s: ide_dma_test_irq \
P
Pete Popov 已提交
383 384
                                     called while not waiting\n", drive->name);

J
Jordan Crouse 已提交
385 386
	/* If dbdma didn't execute the STOP command yet, the
	 * active bit is still set
P
Pete Popov 已提交
387
	 */
J
Jordan Crouse 已提交
388 389 390
	drive->waiting_for_dma++;
	if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
		printk(KERN_WARNING "%s: timeout waiting for ddma to \
P
Pete Popov 已提交
391
                                     complete\n", drive->name);
J
Jordan Crouse 已提交
392 393 394 395
		return 1;
	}
	udelay(10);
	return 0;
P
Pete Popov 已提交
396 397
}

398
static void auide_dma_host_set(ide_drive_t *drive, int on)
P
Pete Popov 已提交
399 400 401
{
}

402
static void auide_dma_lost_irq(ide_drive_t *drive)
P
Pete Popov 已提交
403
{
J
Jordan Crouse 已提交
404
	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
P
Pete Popov 已提交
405 406
}

407
static void auide_ddma_tx_callback(int irq, void *param)
P
Pete Popov 已提交
408
{
J
Jordan Crouse 已提交
409 410
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
P
Pete Popov 已提交
411 412
}

413
static void auide_ddma_rx_callback(int irq, void *param)
P
Pete Popov 已提交
414
{
J
Jordan Crouse 已提交
415 416 417 418 419
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
}

#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
P
Pete Popov 已提交
420

J
Jordan Crouse 已提交
421 422 423 424 425 426 427 428 429
static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
{
	dev->dev_id          = dev_id;
	dev->dev_physaddr    = (u32)AU1XXX_ATA_PHYS_ADDR;
	dev->dev_intlevel    = 0;
	dev->dev_intpolarity = 0;
	dev->dev_tsize       = tsize;
	dev->dev_devwidth    = devwidth;
	dev->dev_flags       = flags;
P
Pete Popov 已提交
430
}
J
Jordan Crouse 已提交
431 432
  
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
P
Pete Popov 已提交
433

434
static void auide_dma_timeout(ide_drive_t *drive)
P
Pete Popov 已提交
435
{
436
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
437

J
Jordan Crouse 已提交
438
	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
P
Pete Popov 已提交
439

440 441
	if (hwif->ide_dma_test_irq(drive))
		return;
P
Pete Popov 已提交
442

443
	hwif->ide_dma_end(drive);
P
Pete Popov 已提交
444
}
J
Jordan Crouse 已提交
445
					
P
Pete Popov 已提交
446

J
Jordan Crouse 已提交
447 448 449 450 451
static int auide_ddma_init(_auide_hwif *auide) {
	
	dbdev_tab_t source_dev_tab, target_dev_tab;
	u32 dev_id, tsize, devwidth, flags;
	ide_hwif_t *hwif = auide->hwif;
P
Pete Popov 已提交
452

J
Jordan Crouse 已提交
453
	dev_id   = AU1XXX_ATA_DDMA_REQ;
P
Pete Popov 已提交
454

J
Jordan Crouse 已提交
455 456 457 458 459 460 461 462 463 464 465
	if (auide->white_list || auide->black_list) {
		tsize    = 8;
		devwidth = 32;
	}
	else { 
		tsize    = 1;
		devwidth = 16;
		
		printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model);
		printk(KERN_ERR "            please read 'Documentation/mips/AU1xxx_IDE.README'");
	}
P
Pete Popov 已提交
466

J
Jordan Crouse 已提交
467 468
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
P
Pete Popov 已提交
469
#else
J
Jordan Crouse 已提交
470
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
471 472
#endif

J
Jordan Crouse 已提交
473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* We also need to add a target device for the DMA */
	auide_init_dbdma_dev( &target_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      tsize, devwidth, DEV_FLAGS_ANYUSE);
	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
 
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
						 auide->tx_dev_id,
						 auide_ddma_tx_callback,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 auide->target_dev_id,
						 auide_ddma_rx_callback,
						 (void*)auide);

	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
						PRD_ENTRIES * PRD_BYTES,        /* 1 Page */
						&hwif->dmatable_dma, GFP_KERNEL);
	
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 
	return 0;
} 
P
Pete Popov 已提交
516
#else
J
Jordan Crouse 已提交
517 518 519 520 521
 
static int auide_ddma_init( _auide_hwif *auide )
{
	dbdev_tab_t source_dev_tab;
	int flags;
P
Pete Popov 已提交
522

J
Jordan Crouse 已提交
523 524 525 526
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
#else
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
527 528
#endif

J
Jordan Crouse 已提交
529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
						 auide->tx_dev_id,
						 NULL,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 DSCR_CMD0_ALWAYS,
						 NULL,
						 (void*)auide);
 
	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 	
	return 0;
P
Pete Popov 已提交
561
}
J
Jordan Crouse 已提交
562
#endif
P
Pete Popov 已提交
563 564 565

static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
{
J
Jordan Crouse 已提交
566 567 568 569 570 571 572 573 574 575
	int i;
	unsigned long *ata_regs = hw->io_ports;

	/* FIXME? */
	for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
		*ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET);
	}

	/* set the Alternative Status register */
	*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
P
Pete Popov 已提交
576 577 578 579 580
}

static int au_ide_probe(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
J
Jordan Crouse 已提交
581 582
	_auide_hwif *ahwif = &auide_hwif;
	ide_hwif_t *hwif;
P
Pete Popov 已提交
583 584
	struct resource *res;
	int ret = 0;
585
	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
586
	hw_regs_t hw;
P
Pete Popov 已提交
587 588

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
J
Jordan Crouse 已提交
589
	char *mode = "MWDMA2";
P
Pete Popov 已提交
590
#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
J
Jordan Crouse 已提交
591
	char *mode = "PIO+DDMA(offload)";
P
Pete Popov 已提交
592 593
#endif

J
Jordan Crouse 已提交
594 595
	memset(&auide_hwif, 0, sizeof(_auide_hwif));
	auide_hwif.dev                  = 0;
P
Pete Popov 已提交
596 597 598 599 600 601 602 603 604

	ahwif->dev = dev;
	ahwif->irq = platform_get_irq(pdev, 0);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (res == NULL) {
		pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
605 606 607 608 609
		goto out;
	}
	if (ahwif->irq < 0) {
		pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
P
Pete Popov 已提交
610 611 612
		goto out;
	}

J
Jordan Crouse 已提交
613
	if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
P
Pete Popov 已提交
614
		pr_debug("%s: request_mem_region failed\n", DRV_NAME);
J
Jordan Crouse 已提交
615
		ret =  -EBUSY;
P
Pete Popov 已提交
616
		goto out;
J
Jordan Crouse 已提交
617
	}
P
Pete Popov 已提交
618 619 620 621 622 623 624

	ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
	if (ahwif->regbase == 0) {
		ret = -ENOMEM;
		goto out;
	}

J
Jordan Crouse 已提交
625 626 627
	/* FIXME:  This might possibly break PCMCIA IDE devices */

	hwif                            = &ide_hwifs[pdev->id];
P
Pete Popov 已提交
628

629 630
	memset(&hw, 0, sizeof(hw));
	auide_setup_ports(&hw, ahwif);
631 632 633 634
	hw.irq = ahwif->irq;
	hw.chipset = ide_au1xxx;

	ide_init_port_hw(hwif, &hw);
P
Pete Popov 已提交
635

J
Jordan Crouse 已提交
636
	hwif->ultra_mask                = 0x0;  /* Disable Ultra DMA */
P
Pete Popov 已提交
637
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
638 639
	hwif->mwdma_mask                = 0x07; /* Multimode-2 DMA  */
	hwif->swdma_mask                = 0x00;
P
Pete Popov 已提交
640
#else
J
Jordan Crouse 已提交
641 642 643 644
	hwif->mwdma_mask                = 0x0;
	hwif->swdma_mask                = 0x0;
#endif

B
Bartlomiej Zolnierkiewicz 已提交
645
	hwif->pio_mask = ATA_PIO4;
646
	hwif->host_flags = IDE_HFLAG_POST_SET_MODE;
B
Bartlomiej Zolnierkiewicz 已提交
647

J
Jordan Crouse 已提交
648 649 650 651 652
	hwif->drives[0].unmask          = 1;
	hwif->drives[1].unmask          = 1;

	/* hold should be on in all cases */
	hwif->hold                      = 1;
653 654

	hwif->mmio  = 1;
J
Jordan Crouse 已提交
655 656 657 658 659 660 661 662

	/* If the user has selected DDMA assisted copies,
	   then set up a few local I/O function entry points 
	*/

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA	
	hwif->INSW                      = auide_insw;
	hwif->OUTSW                     = auide_outsw;
P
Pete Popov 已提交
663
#endif
J
Jordan Crouse 已提交
664

665
	hwif->set_pio_mode		= &au1xxx_set_pio_mode;
666
	hwif->set_dma_mode		= &auide_set_dma_mode;
P
Pete Popov 已提交
667 668

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
669
	hwif->dma_timeout		= &auide_dma_timeout;
J
Jordan Crouse 已提交
670

671 672
	hwif->mdma_filter		= &auide_mdma_filter;

673
	hwif->dma_host_set		= &auide_dma_host_set;
J
Jordan Crouse 已提交
674 675 676 677 678
	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
	hwif->dma_start                 = &auide_dma_start;
	hwif->ide_dma_end               = &auide_dma_end;
	hwif->dma_setup                 = &auide_dma_setup;
	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
679
	hwif->dma_lost_irq		= &auide_dma_lost_irq;
680
#endif
J
Jordan Crouse 已提交
681 682 683 684 685
	hwif->channel                   = 0;
	hwif->select_data               = 0;    /* no chipset-specific code */
	hwif->config_data               = 0;    /* no chipset-specific code */

	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
686
	hwif->drives[1].autotune	= 1;
687

688 689
	hwif->drives[0].no_io_32bit	= 1;
	hwif->drives[1].no_io_32bit	= 1;
P
Pete Popov 已提交
690

J
Jordan Crouse 已提交
691 692
	auide_hwif.hwif                 = hwif;
	hwif->hwif_data                 = &auide_hwif;
P
Pete Popov 已提交
693

J
Jordan Crouse 已提交
694 695 696
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA           
	auide_ddma_init(&auide_hwif);
	dbdma_init_done = 1;
P
Pete Popov 已提交
697 698
#endif

699
	idx[0] = hwif->index;
700

701
	ide_device_add(idx);
702

P
Pete Popov 已提交
703 704
	dev_set_drvdata(dev, hwif);

J
Jordan Crouse 已提交
705
	printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
P
Pete Popov 已提交
706

J
Jordan Crouse 已提交
707 708
 out:
	return ret;
P
Pete Popov 已提交
709 710 711 712 713 714 715
}

static int au_ide_remove(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct resource *res;
	ide_hwif_t *hwif = dev_get_drvdata(dev);
J
Jordan Crouse 已提交
716
	_auide_hwif *ahwif = &auide_hwif;
P
Pete Popov 已提交
717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739

	ide_unregister(hwif - ide_hwifs);

	iounmap((void *)ahwif->regbase);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	release_mem_region(res->start, res->end - res->start);

	return 0;
}

static struct device_driver au1200_ide_driver = {
	.name		= "au1200-ide",
	.bus		= &platform_bus_type,
	.probe 		= au_ide_probe,
	.remove		= au_ide_remove,
};

static int __init au_ide_init(void)
{
	return driver_register(&au1200_ide_driver);
}

J
Jordan Crouse 已提交
740
static void __exit au_ide_exit(void)
P
Pete Popov 已提交
741 742 743 744 745 746 747 748 749
{
	driver_unregister(&au1200_ide_driver);
}

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AU1200 IDE driver");

module_init(au_ide_init);
module_exit(au_ide_exit);