twl6040-vibra.c 10.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
/*
 * twl6040-vibra.c - TWL6040 Vibrator driver
 *
 * Author:      Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
 * Author:      Misael Lopez Cruz <misael.lopez@ti.com>
 *
 * Copyright:   (C) 2011 Texas Instruments, Inc.
 *
 * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
 *				Felipe Balbi <felipe.balbi@nokia.com>
 *				Jari Vanhala <ext-javi.vanhala@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */
#include <linux/module.h>
#include <linux/platform_device.h>
30
#include <linux/of.h>
31
#include <linux/workqueue.h>
32
#include <linux/input.h>
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
#include <linux/mfd/twl6040.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>

#define EFFECT_DIR_180_DEG	0x8000

/* Recommended modulation index 85% */
#define TWL6040_VIBRA_MOD	85

#define TWL6040_NUM_SUPPLIES 2

struct vibra_info {
	struct device *dev;
	struct input_dev *input_dev;
	struct workqueue_struct *workqueue;
	struct work_struct play_work;
50

51
	int irq;
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

	bool enabled;
	int weak_speed;
	int strong_speed;
	int direction;

	unsigned int vibldrv_res;
	unsigned int vibrdrv_res;
	unsigned int viblmotor_res;
	unsigned int vibrmotor_res;

	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];

	struct twl6040 *twl6040;
};

static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
{
	struct vibra_info *info = data;
	struct twl6040 *twl6040 = info->twl6040;
	u8 status;

	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
	if (status & TWL6040_VIBLOCDET) {
		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
78
				   TWL6040_VIBENA);
79 80 81 82
	}
	if (status & TWL6040_VIBROCDET) {
		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
83
				   TWL6040_VIBENA);
84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
	}

	return IRQ_HANDLED;
}

static void twl6040_vibra_enable(struct vibra_info *info)
{
	struct twl6040 *twl6040 = info->twl6040;
	int ret;

	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
	if (ret) {
		dev_err(info->dev, "failed to enable regulators %d\n", ret);
		return;
	}

	twl6040_power(info->twl6040, 1);
101
	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
102 103 104 105 106 107
		/*
		 * ERRATA: Disable overcurrent protection for at least
		 * 3ms when enabling vibrator drivers to avoid false
		 * overcurrent detection
		 */
		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
108
				  TWL6040_VIBENA | TWL6040_VIBCTRL);
109
		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
110
				  TWL6040_VIBENA | TWL6040_VIBCTRL);
111 112 113 114
		usleep_range(3000, 3500);
	}

	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
115
			  TWL6040_VIBENA);
116
	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
117
			  TWL6040_VIBENA);
118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201

	info->enabled = true;
}

static void twl6040_vibra_disable(struct vibra_info *info)
{
	struct twl6040 *twl6040 = info->twl6040;

	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
	twl6040_power(info->twl6040, 0);

	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);

	info->enabled = false;
}

static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
			     int speed, int direction)
{
	int vpk, max_code;
	u8 vibdat;

	/* output swing */
	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
		(100 * (vibdrv_res + motor_res));

	/* 50mV per VIBDAT code step */
	max_code = vpk / 50;
	if (max_code > TWL6040_VIBDAT_MAX)
		max_code = TWL6040_VIBDAT_MAX;

	/* scale speed to max allowed code */
	vibdat = (u8)((speed * max_code) / USHRT_MAX);

	/* 2's complement for direction > 180 degrees */
	vibdat *= direction;

	return vibdat;
}

static void twl6040_vibra_set_effect(struct vibra_info *info)
{
	struct twl6040 *twl6040 = info->twl6040;
	u8 vibdatl, vibdatr;
	int volt;

	/* weak motor */
	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
				     info->viblmotor_res,
				     info->weak_speed, info->direction);

	/* strong motor */
	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
				     info->vibrmotor_res,
				     info->strong_speed, info->direction);

	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
}

static void vibra_play_work(struct work_struct *work)
{
	struct vibra_info *info = container_of(work,
				struct vibra_info, play_work);

	if (info->weak_speed || info->strong_speed) {
		if (!info->enabled)
			twl6040_vibra_enable(info);

		twl6040_vibra_set_effect(info);
	} else if (info->enabled)
		twl6040_vibra_disable(info);

}

static int vibra_play(struct input_dev *input, void *data,
		      struct ff_effect *effect)
{
	struct vibra_info *info = input_get_drvdata(input);
	int ret;

202 203 204 205 206 207 208
	/* Do not allow effect, while the routing is set to use audio */
	ret = twl6040_get_vibralr_status(info->twl6040);
	if (ret & TWL6040_VIBSEL) {
		dev_info(&input->dev, "Vibra is configured for audio\n");
		return -EBUSY;
	}

209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231
	info->weak_speed = effect->u.rumble.weak_magnitude;
	info->strong_speed = effect->u.rumble.strong_magnitude;
	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;

	ret = queue_work(info->workqueue, &info->play_work);
	if (!ret) {
		dev_info(&input->dev, "work is already on queue\n");
		return ret;
	}

	return 0;
}

static void twl6040_vibra_close(struct input_dev *input)
{
	struct vibra_info *info = input_get_drvdata(input);

	cancel_work_sync(&info->play_work);

	if (info->enabled)
		twl6040_vibra_disable(info);
}

232
static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
233 234 235 236
{
	struct platform_device *pdev = to_platform_device(dev);
	struct vibra_info *info = platform_get_drvdata(pdev);

237
	cancel_work_sync(&info->play_work);
238 239 240 241 242 243 244 245 246

	if (info->enabled)
		twl6040_vibra_disable(info);

	return 0;
}

static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);

B
Bill Pemberton 已提交
247
static int twl6040_vibra_probe(struct platform_device *pdev)
248
{
249
	struct device *twl6040_core_dev = pdev->dev.parent;
250
	struct device_node *twl6040_core_node;
251
	struct vibra_info *info;
252 253
	int vddvibl_uV = 0;
	int vddvibr_uV = 0;
254
	int error;
255

256 257
	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
						 "vibra");
258 259
	if (!twl6040_core_node) {
		dev_err(&pdev->dev, "parent of node is missing?\n");
260 261 262
		return -EINVAL;
	}

263
	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
264
	if (!info) {
265
		of_node_put(twl6040_core_node);
266 267 268 269 270
		dev_err(&pdev->dev, "couldn't allocate memory\n");
		return -ENOMEM;
	}

	info->dev = &pdev->dev;
271

272
	info->twl6040 = dev_get_drvdata(pdev->dev.parent);
273 274 275 276 277 278 279 280 281 282 283

	of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
			     &info->vibldrv_res);
	of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
			     &info->vibrdrv_res);
	of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
			     &info->viblmotor_res);
	of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
			     &info->vibrmotor_res);
	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
284

285 286
	of_node_put(twl6040_core_node);

287 288 289
	if ((!info->vibldrv_res && !info->viblmotor_res) ||
	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
290
		return -EINVAL;
291 292
	}

293 294 295
	info->irq = platform_get_irq(pdev, 0);
	if (info->irq < 0) {
		dev_err(info->dev, "invalid irq\n");
296
		return -EINVAL;
297 298
	}

299
	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
300 301
					  twl6040_vib_irq_handler,
					  IRQF_ONESHOT,
302 303 304 305
					  "twl6040_irq_vib", info);
	if (error) {
		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
		return error;
306 307 308 309
	}

	info->supplies[0].supply = "vddvibl";
	info->supplies[1].supply = "vddvibr";
310 311 312 313
	/*
	 * When booted with Device tree the regulators are attached to the
	 * parent device (twl6040 MFD core)
	 */
314 315 316 317 318 319
	error = devm_regulator_bulk_get(twl6040_core_dev,
					ARRAY_SIZE(info->supplies),
					info->supplies);
	if (error) {
		dev_err(info->dev, "couldn't get regulators %d\n", error);
		return error;
320 321
	}

322
	if (vddvibl_uV) {
323 324 325
		error = regulator_set_voltage(info->supplies[0].consumer,
					      vddvibl_uV, vddvibl_uV);
		if (error) {
326
			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
327 328
				error);
			return error;
329 330 331
		}
	}

332
	if (vddvibr_uV) {
333 334 335
		error = regulator_set_voltage(info->supplies[1].consumer,
					      vddvibr_uV, vddvibr_uV);
		if (error) {
336
			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
337 338
				error);
			return error;
339 340 341 342 343
		}
	}

	INIT_WORK(&info->play_work, vibra_play_work);

344 345
	info->input_dev = devm_input_allocate_device(&pdev->dev);
	if (!info->input_dev) {
346
		dev_err(info->dev, "couldn't allocate input device\n");
347
		return -ENOMEM;
348 349 350 351 352 353 354 355 356 357
	}

	input_set_drvdata(info->input_dev, info);

	info->input_dev->name = "twl6040:vibrator";
	info->input_dev->id.version = 1;
	info->input_dev->dev.parent = pdev->dev.parent;
	info->input_dev->close = twl6040_vibra_close;
	__set_bit(FF_RUMBLE, info->input_dev->ffbit);

358 359
	error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
	if (error) {
360
		dev_err(info->dev, "couldn't register vibrator to FF\n");
361
		return error;
362 363
	}

364 365
	error = input_register_device(info->input_dev);
	if (error) {
366
		dev_err(info->dev, "couldn't register input device\n");
367
		return error;
368 369 370 371
	}

	platform_set_drvdata(pdev, info);

372 373 374 375 376 377 378 379 380 381
	return 0;
}

static struct platform_driver twl6040_vibra_driver = {
	.probe		= twl6040_vibra_probe,
	.driver		= {
		.name	= "twl6040-vibra",
		.pm	= &twl6040_vibra_pm_ops,
	},
};
382
module_platform_driver(twl6040_vibra_driver);
383 384 385 386 387 388

MODULE_ALIAS("platform:twl6040-vibra");
MODULE_DESCRIPTION("TWL6040 Vibra driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");