sata_rcar.c 23.5 KB
Newer Older
V
Vladimir Barinov 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
/*
 * Renesas R-Car SATA driver
 *
 * Author: Vladimir Barinov <source@cogentembedded.com>
 * Copyright (C) 2013 Cogent Embedded, Inc.
 * Copyright (C) 2013 Renesas Solutions Corp.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
20
#include <linux/err.h>
V
Vladimir Barinov 已提交
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123

#define DRV_NAME "sata_rcar"

/* SH-Navi2G/ATAPI-ATA compatible task registers */
#define DATA_REG			0x100
#define SDEVCON_REG			0x138

/* SH-Navi2G/ATAPI module compatible control registers */
#define ATAPI_CONTROL1_REG		0x180
#define ATAPI_STATUS_REG		0x184
#define ATAPI_INT_ENABLE_REG		0x188
#define ATAPI_DTB_ADR_REG		0x198
#define ATAPI_DMA_START_ADR_REG		0x19C
#define ATAPI_DMA_TRANS_CNT_REG		0x1A0
#define ATAPI_CONTROL2_REG		0x1A4
#define ATAPI_SIG_ST_REG		0x1B0
#define ATAPI_BYTE_SWAP_REG		0x1BC

/* ATAPI control 1 register (ATAPI_CONTROL1) bits */
#define ATAPI_CONTROL1_ISM		BIT(16)
#define ATAPI_CONTROL1_DTA32M		BIT(11)
#define ATAPI_CONTROL1_RESET		BIT(7)
#define ATAPI_CONTROL1_DESE		BIT(3)
#define ATAPI_CONTROL1_RW		BIT(2)
#define ATAPI_CONTROL1_STOP		BIT(1)
#define ATAPI_CONTROL1_START		BIT(0)

/* ATAPI status register (ATAPI_STATUS) bits */
#define ATAPI_STATUS_SATAINT		BIT(11)
#define ATAPI_STATUS_DNEND		BIT(6)
#define ATAPI_STATUS_DEVTRM		BIT(5)
#define ATAPI_STATUS_DEVINT		BIT(4)
#define ATAPI_STATUS_ERR		BIT(2)
#define ATAPI_STATUS_NEND		BIT(1)
#define ATAPI_STATUS_ACT		BIT(0)

/* Interrupt enable register (ATAPI_INT_ENABLE) bits */
#define ATAPI_INT_ENABLE_SATAINT	BIT(11)
#define ATAPI_INT_ENABLE_DNEND		BIT(6)
#define ATAPI_INT_ENABLE_DEVTRM		BIT(5)
#define ATAPI_INT_ENABLE_DEVINT		BIT(4)
#define ATAPI_INT_ENABLE_ERR		BIT(2)
#define ATAPI_INT_ENABLE_NEND		BIT(1)
#define ATAPI_INT_ENABLE_ACT		BIT(0)

/* Access control registers for physical layer control register */
#define SATAPHYADDR_REG			0x200
#define SATAPHYWDATA_REG		0x204
#define SATAPHYACCEN_REG		0x208
#define SATAPHYRESET_REG		0x20C
#define SATAPHYRDATA_REG		0x210
#define SATAPHYACK_REG			0x214

/* Physical layer control address command register (SATAPHYADDR) bits */
#define SATAPHYADDR_PHYRATEMODE		BIT(10)
#define SATAPHYADDR_PHYCMD_READ		BIT(9)
#define SATAPHYADDR_PHYCMD_WRITE	BIT(8)

/* Physical layer control enable register (SATAPHYACCEN) bits */
#define SATAPHYACCEN_PHYLANE		BIT(0)

/* Physical layer control reset register (SATAPHYRESET) bits */
#define SATAPHYRESET_PHYRST		BIT(1)
#define SATAPHYRESET_PHYSRES		BIT(0)

/* Physical layer control acknowledge register (SATAPHYACK) bits */
#define SATAPHYACK_PHYACK		BIT(0)

/* Serial-ATA HOST control registers */
#define BISTCONF_REG			0x102C
#define SDATA_REG			0x1100
#define SSDEVCON_REG			0x1204

#define SCRSSTS_REG			0x1400
#define SCRSERR_REG			0x1404
#define SCRSCON_REG			0x1408
#define SCRSACT_REG			0x140C

#define SATAINTSTAT_REG			0x1508
#define SATAINTMASK_REG			0x150C

/* SATA INT status register (SATAINTSTAT) bits */
#define SATAINTSTAT_SERR		BIT(3)
#define SATAINTSTAT_ATA			BIT(0)

/* SATA INT mask register (SATAINTSTAT) bits */
#define SATAINTMASK_SERRMSK		BIT(3)
#define SATAINTMASK_ERRMSK		BIT(2)
#define SATAINTMASK_ERRCRTMSK		BIT(1)
#define SATAINTMASK_ATAMSK		BIT(0)

#define SATA_RCAR_INT_MASK		(SATAINTMASK_SERRMSK | \
					 SATAINTMASK_ATAMSK)

/* Physical Layer Control Registers */
#define SATAPCTLR1_REG			0x43
#define SATAPCTLR2_REG			0x52
#define SATAPCTLR3_REG			0x5A
#define SATAPCTLR4_REG			0x60

/* Descriptor table word 0 bit (when DTA32M = 1) */
#define SATA_RCAR_DTEND			BIT(0)

124 125
#define SATA_RCAR_DMA_BOUNDARY		0x1FFFFFFEUL

V
Vladimir Barinov 已提交
126 127 128 129 130 131 132
struct sata_rcar_priv {
	void __iomem *base;
	struct clk *clk;
};

static void sata_rcar_phy_initialize(struct sata_rcar_priv *priv)
{
133 134
	void __iomem *base = priv->base;

V
Vladimir Barinov 已提交
135
	/* idle state */
136
	iowrite32(0, base + SATAPHYADDR_REG);
V
Vladimir Barinov 已提交
137
	/* reset */
138
	iowrite32(SATAPHYRESET_PHYRST, base + SATAPHYRESET_REG);
V
Vladimir Barinov 已提交
139 140
	udelay(10);
	/* deassert reset */
141
	iowrite32(0, base + SATAPHYRESET_REG);
V
Vladimir Barinov 已提交
142 143 144 145 146
}

static void sata_rcar_phy_write(struct sata_rcar_priv *priv, u16 reg, u32 val,
				int group)
{
147
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
148 149 150
	int timeout;

	/* deassert reset */
151
	iowrite32(0, base + SATAPHYRESET_REG);
V
Vladimir Barinov 已提交
152
	/* lane 1 */
153
	iowrite32(SATAPHYACCEN_PHYLANE, base + SATAPHYACCEN_REG);
V
Vladimir Barinov 已提交
154
	/* write phy register value */
155
	iowrite32(val, base + SATAPHYWDATA_REG);
V
Vladimir Barinov 已提交
156 157 158 159
	/* set register group */
	if (group)
		reg |= SATAPHYADDR_PHYRATEMODE;
	/* write command */
160
	iowrite32(SATAPHYADDR_PHYCMD_WRITE | reg, base + SATAPHYADDR_REG);
V
Vladimir Barinov 已提交
161 162
	/* wait for ack */
	for (timeout = 0; timeout < 100; timeout++) {
163
		val = ioread32(base + SATAPHYACK_REG);
V
Vladimir Barinov 已提交
164 165 166 167 168 169
		if (val & SATAPHYACK_PHYACK)
			break;
	}
	if (timeout >= 100)
		pr_err("%s timeout\n", __func__);
	/* idle state */
170
	iowrite32(0, base + SATAPHYADDR_REG);
V
Vladimir Barinov 已提交
171 172 173 174 175 176 177 178 179 180 181 182 183 184 185
}

static void sata_rcar_freeze(struct ata_port *ap)
{
	struct sata_rcar_priv *priv = ap->host->private_data;

	/* mask */
	iowrite32(0x7ff, priv->base + SATAINTMASK_REG);

	ata_sff_freeze(ap);
}

static void sata_rcar_thaw(struct ata_port *ap)
{
	struct sata_rcar_priv *priv = ap->host->private_data;
186
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
187 188

	/* ack */
189
	iowrite32(~SATA_RCAR_INT_MASK, base + SATAINTSTAT_REG);
V
Vladimir Barinov 已提交
190 191 192 193

	ata_sff_thaw(ap);

	/* unmask */
194
	iowrite32(0x7ff & ~SATA_RCAR_INT_MASK, base + SATAINTMASK_REG);
V
Vladimir Barinov 已提交
195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482
}

static void sata_rcar_ioread16_rep(void __iomem *reg, void *buffer, int count)
{
	u16 *ptr = buffer;

	while (count--) {
		u16 data = ioread32(reg);

		*ptr++ = data;
	}
}

static void sata_rcar_iowrite16_rep(void __iomem *reg, void *buffer, int count)
{
	const u16 *ptr = buffer;

	while (count--)
		iowrite32(*ptr++, reg);
}

static u8 sata_rcar_check_status(struct ata_port *ap)
{
	return ioread32(ap->ioaddr.status_addr);
}

static u8 sata_rcar_check_altstatus(struct ata_port *ap)
{
	return ioread32(ap->ioaddr.altstatus_addr);
}

static void sata_rcar_set_devctl(struct ata_port *ap, u8 ctl)
{
	iowrite32(ctl, ap->ioaddr.ctl_addr);
}

static void sata_rcar_dev_select(struct ata_port *ap, unsigned int device)
{
	iowrite32(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
	ata_sff_pause(ap);	/* needed; also flushes, for mmio */
}

static unsigned int sata_rcar_ata_devchk(struct ata_port *ap,
					 unsigned int device)
{
	struct ata_ioports *ioaddr = &ap->ioaddr;
	u8 nsect, lbal;

	sata_rcar_dev_select(ap, device);

	iowrite32(0x55, ioaddr->nsect_addr);
	iowrite32(0xaa, ioaddr->lbal_addr);

	iowrite32(0xaa, ioaddr->nsect_addr);
	iowrite32(0x55, ioaddr->lbal_addr);

	iowrite32(0x55, ioaddr->nsect_addr);
	iowrite32(0xaa, ioaddr->lbal_addr);

	nsect = ioread32(ioaddr->nsect_addr);
	lbal  = ioread32(ioaddr->lbal_addr);

	if (nsect == 0x55 && lbal == 0xaa)
		return 1;	/* found a device */

	return 0;		/* nothing found */
}

static int sata_rcar_wait_after_reset(struct ata_link *link,
				      unsigned long deadline)
{
	struct ata_port *ap = link->ap;

	ata_msleep(ap, ATA_WAIT_AFTER_RESET);

	return ata_sff_wait_ready(link, deadline);
}

static int sata_rcar_bus_softreset(struct ata_port *ap, unsigned long deadline)
{
	struct ata_ioports *ioaddr = &ap->ioaddr;

	DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);

	/* software reset.  causes dev0 to be selected */
	iowrite32(ap->ctl, ioaddr->ctl_addr);
	udelay(20);
	iowrite32(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
	udelay(20);
	iowrite32(ap->ctl, ioaddr->ctl_addr);
	ap->last_ctl = ap->ctl;

	/* wait the port to become ready */
	return sata_rcar_wait_after_reset(&ap->link, deadline);
}

static int sata_rcar_softreset(struct ata_link *link, unsigned int *classes,
			       unsigned long deadline)
{
	struct ata_port *ap = link->ap;
	unsigned int devmask = 0;
	int rc;
	u8 err;

	/* determine if device 0 is present */
	if (sata_rcar_ata_devchk(ap, 0))
		devmask |= 1 << 0;

	/* issue bus reset */
	DPRINTK("about to softreset, devmask=%x\n", devmask);
	rc = sata_rcar_bus_softreset(ap, deadline);
	/* if link is occupied, -ENODEV too is an error */
	if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
		ata_link_err(link, "SRST failed (errno=%d)\n", rc);
		return rc;
	}

	/* determine by signature whether we have ATA or ATAPI devices */
	classes[0] = ata_sff_dev_classify(&link->device[0], devmask, &err);

	DPRINTK("classes[0]=%u\n", classes[0]);
	return 0;
}

static void sata_rcar_tf_load(struct ata_port *ap,
			      const struct ata_taskfile *tf)
{
	struct ata_ioports *ioaddr = &ap->ioaddr;
	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;

	if (tf->ctl != ap->last_ctl) {
		iowrite32(tf->ctl, ioaddr->ctl_addr);
		ap->last_ctl = tf->ctl;
		ata_wait_idle(ap);
	}

	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
		iowrite32(tf->hob_feature, ioaddr->feature_addr);
		iowrite32(tf->hob_nsect, ioaddr->nsect_addr);
		iowrite32(tf->hob_lbal, ioaddr->lbal_addr);
		iowrite32(tf->hob_lbam, ioaddr->lbam_addr);
		iowrite32(tf->hob_lbah, ioaddr->lbah_addr);
		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
			tf->hob_feature,
			tf->hob_nsect,
			tf->hob_lbal,
			tf->hob_lbam,
			tf->hob_lbah);
	}

	if (is_addr) {
		iowrite32(tf->feature, ioaddr->feature_addr);
		iowrite32(tf->nsect, ioaddr->nsect_addr);
		iowrite32(tf->lbal, ioaddr->lbal_addr);
		iowrite32(tf->lbam, ioaddr->lbam_addr);
		iowrite32(tf->lbah, ioaddr->lbah_addr);
		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
			tf->feature,
			tf->nsect,
			tf->lbal,
			tf->lbam,
			tf->lbah);
	}

	if (tf->flags & ATA_TFLAG_DEVICE) {
		iowrite32(tf->device, ioaddr->device_addr);
		VPRINTK("device 0x%X\n", tf->device);
	}

	ata_wait_idle(ap);
}

static void sata_rcar_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
	struct ata_ioports *ioaddr = &ap->ioaddr;

	tf->command = sata_rcar_check_status(ap);
	tf->feature = ioread32(ioaddr->error_addr);
	tf->nsect = ioread32(ioaddr->nsect_addr);
	tf->lbal = ioread32(ioaddr->lbal_addr);
	tf->lbam = ioread32(ioaddr->lbam_addr);
	tf->lbah = ioread32(ioaddr->lbah_addr);
	tf->device = ioread32(ioaddr->device_addr);

	if (tf->flags & ATA_TFLAG_LBA48) {
		iowrite32(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
		tf->hob_feature = ioread32(ioaddr->error_addr);
		tf->hob_nsect = ioread32(ioaddr->nsect_addr);
		tf->hob_lbal = ioread32(ioaddr->lbal_addr);
		tf->hob_lbam = ioread32(ioaddr->lbam_addr);
		tf->hob_lbah = ioread32(ioaddr->lbah_addr);
		iowrite32(tf->ctl, ioaddr->ctl_addr);
		ap->last_ctl = tf->ctl;
	}
}

static void sata_rcar_exec_command(struct ata_port *ap,
				   const struct ata_taskfile *tf)
{
	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);

	iowrite32(tf->command, ap->ioaddr.command_addr);
	ata_sff_pause(ap);
}

static unsigned int sata_rcar_data_xfer(struct ata_device *dev,
					      unsigned char *buf,
					      unsigned int buflen, int rw)
{
	struct ata_port *ap = dev->link->ap;
	void __iomem *data_addr = ap->ioaddr.data_addr;
	unsigned int words = buflen >> 1;

	/* Transfer multiple of 2 bytes */
	if (rw == READ)
		sata_rcar_ioread16_rep(data_addr, buf, words);
	else
		sata_rcar_iowrite16_rep(data_addr, buf, words);

	/* Transfer trailing byte, if any. */
	if (unlikely(buflen & 0x01)) {
		unsigned char pad[2] = { };

		/* Point buf to the tail of buffer */
		buf += buflen - 1;

		/*
		 * Use io*16_rep() accessors here as well to avoid pointlessly
		 * swapping bytes to and from on the big endian machines...
		 */
		if (rw == READ) {
			sata_rcar_ioread16_rep(data_addr, pad, 1);
			*buf = pad[0];
		} else {
			pad[0] = *buf;
			sata_rcar_iowrite16_rep(data_addr, pad, 1);
		}
		words++;
	}

	return words << 1;
}

static void sata_rcar_drain_fifo(struct ata_queued_cmd *qc)
{
	int count;
	struct ata_port *ap;

	/* We only need to flush incoming data when a command was running */
	if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
		return;

	ap = qc->ap;
	/* Drain up to 64K of data before we give up this recovery method */
	for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) &&
			count < 65536; count += 2)
		ioread32(ap->ioaddr.data_addr);

	/* Can become DEBUG later */
	if (count)
		ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count);
}

static int sata_rcar_scr_read(struct ata_link *link, unsigned int sc_reg,
			      u32 *val)
{
	if (sc_reg > SCR_ACTIVE)
		return -EINVAL;

	*val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg << 2));
	return 0;
}

static int sata_rcar_scr_write(struct ata_link *link, unsigned int sc_reg,
			       u32 val)
{
	if (sc_reg > SCR_ACTIVE)
		return -EINVAL;

	iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg << 2));
	return 0;
}

static void sata_rcar_bmdma_fill_sg(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_bmdma_prd *prd = ap->bmdma_prd;
	struct scatterlist *sg;
483
	unsigned int si;
V
Vladimir Barinov 已提交
484 485

	for_each_sg(qc->sg, sg, qc->n_elem, si) {
486
		u32 addr, sg_len;
V
Vladimir Barinov 已提交
487 488 489 490 491 492 493 494

		/*
		 * Note: h/w doesn't support 64-bit, so we unconditionally
		 * truncate dma_addr_t to u32.
		 */
		addr = (u32)sg_dma_address(sg);
		sg_len = sg_dma_len(sg);

495 496 497
		prd[si].addr = cpu_to_le32(addr);
		prd[si].flags_len = cpu_to_le32(sg_len);
		VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
V
Vladimir Barinov 已提交
498 499 500
	}

	/* end-of-table flag */
501
	prd[si - 1].addr |= cpu_to_le32(SATA_RCAR_DTEND);
V
Vladimir Barinov 已提交
502 503 504 505 506 507 508 509 510 511 512 513 514 515 516
}

static void sata_rcar_qc_prep(struct ata_queued_cmd *qc)
{
	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
		return;

	sata_rcar_bmdma_fill_sg(qc);
}

static void sata_rcar_bmdma_setup(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	unsigned int rw = qc->tf.flags & ATA_TFLAG_WRITE;
	struct sata_rcar_priv *priv = ap->host->private_data;
517 518
	void __iomem *base = priv->base;
	u32 dmactl;
V
Vladimir Barinov 已提交
519 520 521

	/* load PRD table addr. */
	mb();   /* make sure PRD table writes are visible to controller */
522
	iowrite32(ap->bmdma_prd_dma, base + ATAPI_DTB_ADR_REG);
V
Vladimir Barinov 已提交
523 524

	/* specify data direction, triple-check start bit is clear */
525
	dmactl = ioread32(base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
526 527 528 529 530 531 532
	dmactl &= ~(ATAPI_CONTROL1_RW | ATAPI_CONTROL1_STOP);
	if (dmactl & ATAPI_CONTROL1_START) {
		dmactl &= ~ATAPI_CONTROL1_START;
		dmactl |= ATAPI_CONTROL1_STOP;
	}
	if (!rw)
		dmactl |= ATAPI_CONTROL1_RW;
533
	iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
534 535 536 537 538 539 540 541 542

	/* issue r/w command */
	ap->ops->sff_exec_command(ap, &qc->tf);
}

static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct sata_rcar_priv *priv = ap->host->private_data;
543 544
	void __iomem *base = priv->base;
	u32 dmactl;
V
Vladimir Barinov 已提交
545 546

	/* start host DMA transaction */
547
	dmactl = ioread32(base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
548
	dmactl |= ATAPI_CONTROL1_START;
549
	iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
550 551 552 553 554 555
}

static void sata_rcar_bmdma_stop(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct sata_rcar_priv *priv = ap->host->private_data;
556
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
557 558 559
	u32 dmactl;

	/* force termination of DMA transfer if active */
560
	dmactl = ioread32(base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
561 562 563
	if (dmactl & ATAPI_CONTROL1_START) {
		dmactl &= ~ATAPI_CONTROL1_START;
		dmactl |= ATAPI_CONTROL1_STOP;
564
		iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
565 566 567 568 569 570 571 572 573 574
	}

	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
	ata_sff_dma_pause(ap);
}

static u8 sata_rcar_bmdma_status(struct ata_port *ap)
{
	struct sata_rcar_priv *priv = ap->host->private_data;
	u8 host_stat = 0;
575
	u32 status;
V
Vladimir Barinov 已提交
576 577 578 579 580 581 582 583 584 585 586

	status = ioread32(priv->base + ATAPI_STATUS_REG);
	if (status & ATAPI_STATUS_DEVINT)
		host_stat |= ATA_DMA_INTR;
	if (status & ATAPI_STATUS_ACT)
		host_stat |= ATA_DMA_ACTIVE;

	return host_stat;
}

static struct scsi_host_template sata_rcar_sht = {
587 588 589 590 591 592 593 594
	ATA_BASE_SHT(DRV_NAME),
	/*
	 * This controller allows transfer chunks up to 512MB which cross 64KB
	 * boundaries, therefore the DMA limits are more relaxed than standard
	 * ATA SFF.
	 */
	.sg_tablesize		= ATA_MAX_PRD,
	.dma_boundary		= SATA_RCAR_DMA_BOUNDARY,
V
Vladimir Barinov 已提交
595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675
};

static struct ata_port_operations sata_rcar_port_ops = {
	.inherits		= &ata_bmdma_port_ops,

	.freeze			= sata_rcar_freeze,
	.thaw			= sata_rcar_thaw,
	.softreset		= sata_rcar_softreset,

	.scr_read		= sata_rcar_scr_read,
	.scr_write		= sata_rcar_scr_write,

	.sff_dev_select		= sata_rcar_dev_select,
	.sff_set_devctl		= sata_rcar_set_devctl,
	.sff_check_status	= sata_rcar_check_status,
	.sff_check_altstatus	= sata_rcar_check_altstatus,
	.sff_tf_load		= sata_rcar_tf_load,
	.sff_tf_read		= sata_rcar_tf_read,
	.sff_exec_command	= sata_rcar_exec_command,
	.sff_data_xfer		= sata_rcar_data_xfer,
	.sff_drain_fifo		= sata_rcar_drain_fifo,

	.qc_prep		= sata_rcar_qc_prep,

	.bmdma_setup		= sata_rcar_bmdma_setup,
	.bmdma_start		= sata_rcar_bmdma_start,
	.bmdma_stop		= sata_rcar_bmdma_stop,
	.bmdma_status		= sata_rcar_bmdma_status,
};

static int sata_rcar_serr_interrupt(struct ata_port *ap)
{
	struct sata_rcar_priv *priv = ap->host->private_data;
	struct ata_eh_info *ehi = &ap->link.eh_info;
	int freeze = 0;
	int handled = 0;
	u32 serror;

	serror = ioread32(priv->base + SCRSERR_REG);
	if (!serror)
		return 0;

	DPRINTK("SError @host_intr: 0x%x\n", serror);

	/* first, analyze and record host port events */
	ata_ehi_clear_desc(ehi);

	if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) {
		/* Setup a soft-reset EH action */
		ata_ehi_hotplugged(ehi);
		ata_ehi_push_desc(ehi, "%s", "hotplug");

		freeze = serror & SERR_COMM_WAKE ? 0 : 1;
		handled = 1;
	}

	/* freeze or abort */
	if (freeze)
		ata_port_freeze(ap);
	else
		ata_port_abort(ap);

	return handled;
}

static int sata_rcar_ata_interrupt(struct ata_port *ap)
{
	struct ata_queued_cmd *qc;
	int handled = 0;

	qc = ata_qc_from_tag(ap, ap->link.active_tag);
	if (qc)
		handled |= ata_bmdma_port_intr(ap, qc);

	return handled;
}

static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance)
{
	struct ata_host *host = dev_instance;
	struct sata_rcar_priv *priv = host->private_data;
676
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
677
	unsigned int handled = 0;
678
	struct ata_port *ap;
V
Vladimir Barinov 已提交
679 680 681 682 683
	u32 sataintstat;
	unsigned long flags;

	spin_lock_irqsave(&host->lock, flags);

684
	sataintstat = ioread32(base + SATAINTSTAT_REG);
V
Vladimir Barinov 已提交
685 686 687
	if (!sataintstat)
		goto done;
	/* ack */
688
	iowrite32(sataintstat & ~SATA_RCAR_INT_MASK, base + SATAINTSTAT_REG);
V
Vladimir Barinov 已提交
689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708

	ap = host->ports[0];

	if (sataintstat & SATAINTSTAT_ATA)
		handled |= sata_rcar_ata_interrupt(ap);

	if (sataintstat & SATAINTSTAT_SERR)
		handled |= sata_rcar_serr_interrupt(ap);

done:
	spin_unlock_irqrestore(&host->lock, flags);

	return IRQ_RETVAL(handled);
}

static void sata_rcar_setup_port(struct ata_host *host)
{
	struct ata_port *ap = host->ports[0];
	struct ata_ioports *ioaddr = &ap->ioaddr;
	struct sata_rcar_priv *priv = host->private_data;
709
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
710 711 712 713 714 715

	ap->ops		= &sata_rcar_port_ops;
	ap->pio_mask	= ATA_PIO4;
	ap->udma_mask	= ATA_UDMA6;
	ap->flags	|= ATA_FLAG_SATA;

716 717 718
	ioaddr->cmd_addr = base + SDATA_REG;
	ioaddr->ctl_addr = base + SSDEVCON_REG;
	ioaddr->scr_addr = base + SCRSSTS_REG;
V
Vladimir Barinov 已提交
719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735
	ioaddr->altstatus_addr = ioaddr->ctl_addr;

	ioaddr->data_addr	= ioaddr->cmd_addr + (ATA_REG_DATA << 2);
	ioaddr->error_addr	= ioaddr->cmd_addr + (ATA_REG_ERR << 2);
	ioaddr->feature_addr	= ioaddr->cmd_addr + (ATA_REG_FEATURE << 2);
	ioaddr->nsect_addr	= ioaddr->cmd_addr + (ATA_REG_NSECT << 2);
	ioaddr->lbal_addr	= ioaddr->cmd_addr + (ATA_REG_LBAL << 2);
	ioaddr->lbam_addr	= ioaddr->cmd_addr + (ATA_REG_LBAM << 2);
	ioaddr->lbah_addr	= ioaddr->cmd_addr + (ATA_REG_LBAH << 2);
	ioaddr->device_addr	= ioaddr->cmd_addr + (ATA_REG_DEVICE << 2);
	ioaddr->status_addr	= ioaddr->cmd_addr + (ATA_REG_STATUS << 2);
	ioaddr->command_addr	= ioaddr->cmd_addr + (ATA_REG_CMD << 2);
}

static void sata_rcar_init_controller(struct ata_host *host)
{
	struct sata_rcar_priv *priv = host->private_data;
736
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
737 738 739 740 741 742 743 744 745 746 747 748
	u32 val;

	/* reset and setup phy */
	sata_rcar_phy_initialize(priv);
	sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0);
	sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1);
	sata_rcar_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0);
	sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0);
	sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1);
	sata_rcar_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0);

	/* SATA-IP reset state */
749
	val = ioread32(base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
750
	val |= ATAPI_CONTROL1_RESET;
751
	iowrite32(val, base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
752 753

	/* ISM mode, PRD mode, DTEND flag at bit 0 */
754
	val = ioread32(base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
755 756 757
	val |= ATAPI_CONTROL1_ISM;
	val |= ATAPI_CONTROL1_DESE;
	val |= ATAPI_CONTROL1_DTA32M;
758
	iowrite32(val, base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
759 760

	/* Release the SATA-IP from the reset state */
761
	val = ioread32(base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
762
	val &= ~ATAPI_CONTROL1_RESET;
763
	iowrite32(val, base + ATAPI_CONTROL1_REG);
V
Vladimir Barinov 已提交
764 765

	/* ack and mask */
766 767
	iowrite32(0, base + SATAINTSTAT_REG);
	iowrite32(0x7ff, base + SATAINTMASK_REG);
V
Vladimir Barinov 已提交
768
	/* enable interrupts */
769
	iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
V
Vladimir Barinov 已提交
770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808
}

static int sata_rcar_probe(struct platform_device *pdev)
{
	struct ata_host *host;
	struct sata_rcar_priv *priv;
	struct resource *mem;
	int irq;
	int ret = 0;

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (mem == NULL)
		return -EINVAL;

	irq = platform_get_irq(pdev, 0);
	if (irq <= 0)
		return -EINVAL;

	priv = devm_kzalloc(&pdev->dev, sizeof(struct sata_rcar_priv),
			   GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	priv->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(priv->clk)) {
		dev_err(&pdev->dev, "failed to get access to sata clock\n");
		return PTR_ERR(priv->clk);
	}
	clk_enable(priv->clk);

	host = ata_host_alloc(&pdev->dev, 1);
	if (!host) {
		dev_err(&pdev->dev, "ata_host_alloc failed\n");
		ret = -ENOMEM;
		goto cleanup;
	}

	host->private_data = priv;

809 810 811
	priv->base = devm_ioremap_resource(&pdev->dev, mem);
	if (IS_ERR(priv->base)) {
		ret = PTR_ERR(priv->base);
V
Vladimir Barinov 已提交
812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833
		goto cleanup;
	}

	/* setup port */
	sata_rcar_setup_port(host);

	/* initialize host controller */
	sata_rcar_init_controller(host);

	ret = ata_host_activate(host, irq, sata_rcar_interrupt, 0,
				&sata_rcar_sht);
	if (!ret)
		return 0;

cleanup:
	clk_disable(priv->clk);

	return ret;
}

static int sata_rcar_remove(struct platform_device *pdev)
{
834
	struct ata_host *host = platform_get_drvdata(pdev);
V
Vladimir Barinov 已提交
835
	struct sata_rcar_priv *priv = host->private_data;
836
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
837 838 839 840

	ata_host_detach(host);

	/* disable interrupts */
841
	iowrite32(0, base + ATAPI_INT_ENABLE_REG);
V
Vladimir Barinov 已提交
842
	/* ack and mask */
843 844
	iowrite32(0, base + SATAINTSTAT_REG);
	iowrite32(0x7ff, base + SATAINTMASK_REG);
V
Vladimir Barinov 已提交
845 846 847 848 849 850 851 852 853 854 855

	clk_disable(priv->clk);

	return 0;
}

#ifdef CONFIG_PM
static int sata_rcar_suspend(struct device *dev)
{
	struct ata_host *host = dev_get_drvdata(dev);
	struct sata_rcar_priv *priv = host->private_data;
856
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
857 858 859 860 861
	int ret;

	ret = ata_host_suspend(host, PMSG_SUSPEND);
	if (!ret) {
		/* disable interrupts */
862
		iowrite32(0, base + ATAPI_INT_ENABLE_REG);
V
Vladimir Barinov 已提交
863
		/* mask */
864
		iowrite32(0x7ff, base + SATAINTMASK_REG);
V
Vladimir Barinov 已提交
865 866 867 868 869 870 871 872 873 874 875

		clk_disable(priv->clk);
	}

	return ret;
}

static int sata_rcar_resume(struct device *dev)
{
	struct ata_host *host = dev_get_drvdata(dev);
	struct sata_rcar_priv *priv = host->private_data;
876
	void __iomem *base = priv->base;
V
Vladimir Barinov 已提交
877 878 879 880

	clk_enable(priv->clk);

	/* ack and mask */
881 882
	iowrite32(0, base + SATAINTSTAT_REG);
	iowrite32(0x7ff, base + SATAINTMASK_REG);
V
Vladimir Barinov 已提交
883
	/* enable interrupts */
884
	iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
V
Vladimir Barinov 已提交
885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920

	ata_host_resume(host);

	return 0;
}

static const struct dev_pm_ops sata_rcar_pm_ops = {
	.suspend	= sata_rcar_suspend,
	.resume		= sata_rcar_resume,
};
#endif

static struct of_device_id sata_rcar_match[] = {
	{ .compatible = "renesas,rcar-sata", },
	{},
};
MODULE_DEVICE_TABLE(of, sata_rcar_match);

static struct platform_driver sata_rcar_driver = {
	.probe		= sata_rcar_probe,
	.remove		= sata_rcar_remove,
	.driver = {
		.name		= DRV_NAME,
		.owner		= THIS_MODULE,
		.of_match_table	= sata_rcar_match,
#ifdef CONFIG_PM
		.pm		= &sata_rcar_pm_ops,
#endif
	},
};

module_platform_driver(sata_rcar_driver);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Vladimir Barinov");
MODULE_DESCRIPTION("Renesas R-Car SATA controller low level driver");