Kconfig 39.3 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux Kernel Configuration"

config ARM
	bool
	default y
11
	select HAVE_AOUT
A
Adrian Bunk 已提交
12
	select HAVE_IDE
13
	select RTC_LIB
14
	select SYS_SUPPORTS_APM_EMULATION
M
Mathieu Desnoyers 已提交
15
	select HAVE_OPROFILE
J
Jason Wessel 已提交
16
	select HAVE_ARCH_KGDB
M
Mathieu Desnoyers 已提交
17
	select HAVE_KPROBES if (!XIP_KERNEL)
18
	select HAVE_KRETPROBES if (HAVE_KPROBES)
19
	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
20
	select HAVE_GENERIC_DMA_COHERENT
L
Linus Torvalds 已提交
21 22
	help
	  The ARM series is a line of low-power-consumption RISC chip designs
23
	  licensed by ARM Ltd and targeted at embedded applications and
L
Linus Torvalds 已提交
24
	  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
25
	  manufactured, but legacy ARM-based PC hardware remains popular in
L
Linus Torvalds 已提交
26 27 28
	  Europe.  There is an ARM Linux project with a web page at
	  <http://www.arm.linux.org.uk/>.

R
Russell King 已提交
29 30 31
config HAVE_PWM
	bool

32 33 34
config SYS_SUPPORTS_APM_EMULATION
	bool

D
David Brownell 已提交
35 36 37
config GENERIC_GPIO
	bool

38 39 40
config GENERIC_TIME
	bool

41 42 43
config GENERIC_CLOCKEVENTS
	bool

44 45 46 47 48
config GENERIC_CLOCKEVENTS_BROADCAST
	bool
	depends on GENERIC_CLOCKEVENTS
	default y if SMP && !LOCAL_TIMERS

49 50 51 52
config HAVE_TCM
	bool
	select GENERIC_ALLOCATOR

A
Al Viro 已提交
53 54 55
config NO_IOPORT
	bool

L
Linus Torvalds 已提交
56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81
config EISA
	bool
	---help---
	  The Extended Industry Standard Architecture (EISA) bus was
	  developed as an open alternative to the IBM MicroChannel bus.

	  The EISA bus provided some of the features of the IBM MicroChannel
	  bus while maintaining backward compatibility with cards made for
	  the older ISA bus.  The EISA bus saw limited use between 1988 and
	  1995 when it was made obsolete by the PCI bus.

	  Say Y here if you are building a kernel for an EISA-based machine.

	  Otherwise, say N.

config SBUS
	bool

config MCA
	bool
	help
	  MicroChannel Architecture is found in some IBM PS/2 machines and
	  laptops.  It is a bus system similar to PCI or ISA. See
	  <file:Documentation/mca.txt> (and especially the web page given
	  there) before attempting to build an MCA bus kernel.

82 83 84 85
config GENERIC_HARDIRQS
	bool
	default y

86 87 88 89
config STACKTRACE_SUPPORT
	bool
	default y

N
Nicolas Pitre 已提交
90 91 92 93 94
config HAVE_LATENCYTOP_SUPPORT
	bool
	depends on !SMP
	default y

95 96 97 98
config LOCKDEP_SUPPORT
	bool
	default y

R
Russell King 已提交
99 100 101 102
config TRACE_IRQFLAGS_SUPPORT
	bool
	default y

103 104 105 106 107 108 109 110
config HARDIRQS_SW_RESEND
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

N
Nick Piggin 已提交
111 112 113 114 115
config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPT

L
Linus Torvalds 已提交
116 117 118 119 120 121 122
config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

123 124 125 126 127 128
config ARCH_HAS_ILOG2_U32
	bool

config ARCH_HAS_ILOG2_U64
	bool

129 130 131 132 133 134 135
config ARCH_HAS_CPUFREQ
	bool
	help
	  Internal node to signify that the ARCH has CPUFREQ support
	  and that the relevant menu configurations are displayed for
	  it.

136 137 138 139
config GENERIC_HWEIGHT
	bool
	default y

L
Linus Torvalds 已提交
140 141 142 143
config GENERIC_CALIBRATE_DELAY
	bool
	default y

144 145 146
config ARCH_MAY_HAVE_PC_FDC
	bool

147 148 149
config ZONE_DMA
	bool

L
Linus Torvalds 已提交
150 151 152 153 154 155
config GENERIC_ISA_DMA
	bool

config FIQ
	bool

156 157 158
config ARCH_MTD_XIP
	bool

159 160 161
config GENERIC_HARDIRQS_NO__DO_IRQ
	def_bool y

162 163 164 165 166 167 168 169 170 171 172 173 174 175 176
if OPROFILE

config OPROFILE_ARMV6
	def_bool y
	depends on CPU_V6 && !SMP
	select OPROFILE_ARM11_CORE

config OPROFILE_MPCORE
	def_bool y
	depends on CPU_V6 && SMP
	select OPROFILE_ARM11_CORE

config OPROFILE_ARM11_CORE
	bool

177 178 179 180 181
config OPROFILE_ARMV7
	def_bool y
	depends on CPU_V7 && !SMP
	bool

182 183
endif

184 185
config VECTORS_BASE
	hex
186
	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
187 188 189 190 191
	default DRAM_BASE if REMAP_VECTORS_TO_RAM
	default 0x00000000
	help
	  The base address of exception vectors.

L
Linus Torvalds 已提交
192 193
source "init/Kconfig"

194 195
source "kernel/Kconfig.freezer"

L
Linus Torvalds 已提交
196 197
menu "System Type"

198 199 200 201 202 203 204
config MMU
	bool "MMU-based Paged Memory Management Support"
	default y
	help
	  Select if you want MMU-based virtualised addressing space
	  support by paged memory management. If unsure, say 'Y'.

L
Linus Torvalds 已提交
205 206
choice
	prompt "ARM system type"
207
	default ARCH_VERSATILE
L
Linus Torvalds 已提交
208

209 210
config ARCH_AAEC2000
	bool "Agilent AAEC-2000 based"
211
	select CPU_ARM920T
212
	select ARM_AMBA
213
	select HAVE_CLK
214 215 216 217 218 219
	help
	  This enables support for systems based on the Agilent AAEC-2000

config ARCH_INTEGRATOR
	bool "ARM Ltd. Integrator family"
	select ARM_AMBA
220
	select ARCH_HAS_CPUFREQ
221
	select HAVE_CLK
222
	select COMMON_CLKDEV
223 224 225 226 227 228 229
	select ICST525
	help
	  Support for ARM's Integrator platform.

config ARCH_REALVIEW
	bool "ARM Ltd. RealView family"
	select ARM_AMBA
230
	select HAVE_CLK
231
	select COMMON_CLKDEV
232
	select ICST307
233
	select GENERIC_TIME
234
	select GENERIC_CLOCKEVENTS
235
	select ARCH_WANT_OPTIONAL_GPIOLIB
236 237 238 239 240 241 242
	help
	  This enables support for ARM Ltd RealView boards.

config ARCH_VERSATILE
	bool "ARM Ltd. Versatile family"
	select ARM_AMBA
	select ARM_VIC
243
	select HAVE_CLK
244
	select COMMON_CLKDEV
245
	select ICST307
246
	select GENERIC_TIME
247
	select GENERIC_CLOCKEVENTS
248
	select ARCH_WANT_OPTIONAL_GPIOLIB
249 250 251
	help
	  This enables support for ARM Ltd Versatile board.

252 253
config ARCH_AT91
	bool "Atmel AT91"
D
David Brownell 已提交
254
	select GENERIC_GPIO
255
	select ARCH_REQUIRE_GPIOLIB
D
David Brownell 已提交
256
	select HAVE_CLK
257
	help
258 259
	  This enables support for systems based on the Atmel AT91RM9200,
	  AT91SAM9 and AT91CAP9 processors.
260

L
Linus Torvalds 已提交
261
config ARCH_CLPS711X
262
	bool "Cirrus Logic CLPS711x/EP721x-based"
263
	select CPU_ARM720T
264 265
	help
	  Support for Cirrus Logic 711x/721x based boards.
L
Linus Torvalds 已提交
266

267 268 269 270 271 272 273 274
config ARCH_GEMINI
	bool "Cortina Systems Gemini"
	select CPU_FA526
	select GENERIC_GPIO
	select ARCH_REQUIRE_GPIOLIB
	help
	  Support for the Cortina Systems Gemini family SoCs

L
Linus Torvalds 已提交
275 276
config ARCH_EBSA110
	bool "EBSA-110"
277
	select CPU_SA110
278
	select ISA
279
	select NO_IOPORT
L
Linus Torvalds 已提交
280 281
	help
	  This is an evaluation board for the StrongARM processor available
282
	  from Digital. It has limited hardware on-board, including an
L
Linus Torvalds 已提交
283 284 285
	  Ethernet interface, two PCMCIA sockets, two serial ports and a
	  parallel port.

286 287
config ARCH_EP93XX
	bool "EP93xx-based"
288
	select CPU_ARM920T
289 290
	select ARM_AMBA
	select ARM_VIC
291
	select GENERIC_GPIO
292
	select HAVE_CLK
293
	select COMMON_CLKDEV
M
Michael Buesch 已提交
294
	select ARCH_REQUIRE_GPIOLIB
295
	select ARCH_HAS_HOLES_MEMORYMODEL
296 297 298
	help
	  This enables support for the Cirrus EP93xx series of CPUs.

L
Linus Torvalds 已提交
299 300
config ARCH_FOOTBRIDGE
	bool "FootBridge"
301
	select CPU_SA110
L
Linus Torvalds 已提交
302
	select FOOTBRIDGE
303 304 305
	help
	  Support for systems based on the DC21285 companion chip
	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
L
Linus Torvalds 已提交
306

307 308 309 310 311 312 313
config ARCH_MXC
	bool "Freescale MXC/iMX-based"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select ARCH_MTD_XIP
	select GENERIC_GPIO
	select ARCH_REQUIRE_GPIOLIB
314
	select HAVE_CLK
315 316 317
	help
	  Support for Freescale MXC/iMX-based family of processors

318 319 320 321 322 323 324 325 326 327 328 329 330
config ARCH_STMP3XXX
	bool "Freescale STMP3xxx"
	select CPU_ARM926T
	select HAVE_CLK
	select COMMON_CLKDEV
	select ARCH_REQUIRE_GPIOLIB
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select GENERIC_GPIO
	select USB_ARCH_HAS_EHCI
	help
	  Support for systems based on the Freescale 3xxx CPUs.

331 332
config ARCH_NETX
	bool "Hilscher NetX based"
333
	select CPU_ARM926T
334
	select ARM_VIC
335
	select GENERIC_CLOCKEVENTS
U
Uwe Kleine-König 已提交
336
	select GENERIC_TIME
337
	help
338 339 340 341
	  This enables support for systems based on the Hilscher NetX Soc

config ARCH_H720X
	bool "Hynix HMS720x-based"
342
	select CPU_ARM720T
343 344 345 346
	select ISA_DMA_API
	help
	  This enables support for systems based on the Hynix HMS720x

347 348 349 350 351 352 353 354 355
config ARCH_NOMADIK
	bool "STMicroelectronics Nomadik"
	select ARM_AMBA
	select ARM_VIC
	select CPU_ARM926T
	select HAVE_CLK
	select COMMON_CLKDEV
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
356 357
	select GENERIC_GPIO
	select ARCH_REQUIRE_GPIOLIB
358 359 360
	help
	  Support for the Nomadik platform by ST-Ericsson

361 362 363
config ARCH_IOP13XX
	bool "IOP13xx-based"
	depends on MMU
364
	select CPU_XSC3
365 366 367
	select PLAT_IOP
	select PCI
	select ARCH_SUPPORTS_MSI
368
	select VMSPLIT_1G
369 370 371
	help
	  Support for Intel's IOP13XX (XScale) family of processors.

372 373
config ARCH_IOP32X
	bool "IOP32x-based"
374
	depends on MMU
375
	select CPU_XSCALE
376
	select PLAT_IOP
377
	select PCI
378
	select GENERIC_GPIO
379
	select ARCH_REQUIRE_GPIOLIB
380
	help
381 382 383 384 385 386
	  Support for Intel's 80219 and IOP32X (XScale) family of
	  processors.

config ARCH_IOP33X
	bool "IOP33x-based"
	depends on MMU
387
	select CPU_XSCALE
388
	select PLAT_IOP
389
	select PCI
390
	select GENERIC_GPIO
391
	select ARCH_REQUIRE_GPIOLIB
392 393
	help
	  Support for Intel's IOP33X (XScale) family of processors.
L
Linus Torvalds 已提交
394

395 396
config ARCH_IXP23XX
 	bool "IXP23XX-based"
397
	depends on MMU
398
	select CPU_XSC3
399
 	select PCI
400
	help
401
	  Support for Intel's IXP23xx (XScale) family of processors.
L
Linus Torvalds 已提交
402 403 404

config ARCH_IXP2000
	bool "IXP2400/2800-based"
405
	depends on MMU
406
	select CPU_XSCALE
407
	select PCI
408 409
	help
	  Support for Intel's IXP2400/2800 (XScale) family of processors.
L
Linus Torvalds 已提交
410

411 412
config ARCH_IXP4XX
	bool "IXP4xx-based"
413
	depends on MMU
414
	select CPU_XSCALE
415
	select GENERIC_GPIO
416 417
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
R
Russell King 已提交
418
	select DMABOUNCE if PCI
419
	help
420
	  Support for Intel's IXP4XX (XScale) family of processors.
421

L
Linus Torvalds 已提交
422 423
config ARCH_L7200
	bool "LinkUp-L7200"
424
	select CPU_ARM720T
L
Linus Torvalds 已提交
425 426 427 428 429 430 431 432 433 434 435
	select FIQ
	help
	  Say Y here if you intend to run this kernel on a LinkUp Systems
	  L7200 Software Development Board which uses an ARM720T processor.
	  Information on this board can be obtained at:

	  <http://www.linkupsys.com/>

	  If you have any questions or comments about the Linux kernel port
	  to this board, send e-mail to <sjhill@cotw.com>.

436 437
config ARCH_KIRKWOOD
	bool "Marvell Kirkwood"
438
	select CPU_FEROCEON
439
	select PCI
440
	select GENERIC_GPIO
441
	select ARCH_REQUIRE_GPIOLIB
442 443 444 445 446 447 448
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select PLAT_ORION
	help
	  Support for the following Marvell Kirkwood series SoCs:
	  88F6180, 88F6192 and 88F6281.

449 450
config ARCH_LOKI
	bool "Marvell Loki (88RC8480)"
451
	select CPU_FEROCEON
452 453 454 455 456 457
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select PLAT_ORION
	help
	  Support for the Marvell Loki (88RC8480) SoC.

458 459
config ARCH_MV78XX0
	bool "Marvell MV78xx0"
460
	select CPU_FEROCEON
461
	select PCI
462
	select GENERIC_GPIO
463
	select ARCH_REQUIRE_GPIOLIB
464 465 466 467 468 469 470
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select PLAT_ORION
	help
	  Support for the following Marvell MV78xx0 series SoCs:
	  MV781x0, MV782x0.

471
config ARCH_ORION5X
472 473
	bool "Marvell Orion"
	depends on MMU
474
	select CPU_FEROCEON
T
Tzachi Perelstein 已提交
475
	select PCI
T
Tzachi Perelstein 已提交
476
	select GENERIC_GPIO
477
	select ARCH_REQUIRE_GPIOLIB
478 479
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
L
Lennert Buytenhek 已提交
480
	select PLAT_ORION
481
	help
482
	  Support for the following Marvell Orion 5x series SoCs:
483
	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
484
	  Orion-2 (5281), Orion-1-90 (6183).
485

486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524
config ARCH_MMP
	bool "Marvell PXA168/910"
	depends on MMU
	select GENERIC_GPIO
	select ARCH_REQUIRE_GPIOLIB
	select HAVE_CLK
	select COMMON_CLKDEV
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select TICK_ONESHOT
	select PLAT_PXA
	help
	  Support for Marvell's PXA168/910 processor line.

config ARCH_KS8695
	bool "Micrel/Kendin KS8695"
	select CPU_ARM922T
	select GENERIC_GPIO
        select ARCH_REQUIRE_GPIOLIB
	help
	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
	  System-on-Chip devices.

config ARCH_NS9XXX
	bool "NetSilicon NS9xxx"
	select CPU_ARM926T
	select GENERIC_GPIO
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select HAVE_CLK
	help
	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
	  System.

	  <http://www.digi.com/products/microprocessors/index.jsp>

config ARCH_W90X900
	bool "Nuvoton W90X900 CPU"
	select CPU_ARM926T
525 526
	select ARCH_REQUIRE_GPIOLIB
	select GENERIC_GPIO
527
	select HAVE_CLK
528
	select COMMON_CLKDEV
529 530
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
531
	help
532 533 534 535 536 537 538
	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
	  At present, the w90x900 has been renamed nuc900, regarding
	  the ARM series product line, you can login the following
	  link address to know more.

	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
539

540 541
config ARCH_PNX4008
	bool "Philips Nexperia PNX4008 Mobile"
542
	select CPU_ARM926T
543
	select HAVE_CLK
544 545 546
	help
	  This enables support for Philips PNX4008 mobile platform.

L
Linus Torvalds 已提交
547
config ARCH_PXA
E
eric miao 已提交
548
	bool "PXA2xx/PXA3xx-based"
549
	depends on MMU
550
	select ARCH_MTD_XIP
551
	select ARCH_HAS_CPUFREQ
D
David Brownell 已提交
552
	select GENERIC_GPIO
553
	select HAVE_CLK
554
	select COMMON_CLKDEV
M
Michael Buesch 已提交
555
	select ARCH_REQUIRE_GPIOLIB
556
	select GENERIC_TIME
557
	select GENERIC_CLOCKEVENTS
558
	select TICK_ONESHOT
559
	select PLAT_PXA
560
	help
E
eric miao 已提交
561
	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
L
Linus Torvalds 已提交
562

563 564 565
config ARCH_MSM
	bool "Qualcomm MSM"
	select CPU_V6
566 567 568
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	help
569 570 571 572
	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
	  apps processor of the MSM7K and depends on a shared memory
	  interface to the ARM9 modem processor which runs the baseband stack
	  and controls some vital subsystems (clock and power control, etc).
573

L
Linus Torvalds 已提交
574 575 576 577 578
config ARCH_RPC
	bool "RiscPC"
	select ARCH_ACORN
	select FIQ
	select TIMER_ACORN
579
	select ARCH_MAY_HAVE_PC_FDC
580
	select HAVE_PATA_PLATFORM
581
	select ISA_DMA_API
A
Al Viro 已提交
582
	select NO_IOPORT
583
	select ARCH_SPARSEMEM_ENABLE
L
Linus Torvalds 已提交
584 585 586 587 588 589
	help
	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
	  CD-ROM interface, serial and parallel port, and the floppy drive.

config ARCH_SA1100
	bool "SA1100-based"
590
	select CPU_SA1100
591
	select ISA
592
	select ARCH_SPARSEMEM_ENABLE
593
	select ARCH_MTD_XIP
594
	select ARCH_HAS_CPUFREQ
D
David Brownell 已提交
595
	select GENERIC_GPIO
596
	select GENERIC_TIME
597
	select GENERIC_CLOCKEVENTS
598
	select HAVE_CLK
599
	select TICK_ONESHOT
M
Michael Buesch 已提交
600
	select ARCH_REQUIRE_GPIOLIB
601 602
	help
	  Support for StrongARM 11x0 based boards.
L
Linus Torvalds 已提交
603 604

config ARCH_S3C2410
605
	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
D
David Brownell 已提交
606
	select GENERIC_GPIO
B
Ben Dooks 已提交
607
	select ARCH_HAS_CPUFREQ
608
	select HAVE_CLK
L
Linus Torvalds 已提交
609 610 611
	help
	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
612
	  the Samsung SMDK2410 development board (and derivatives).
L
Linus Torvalds 已提交
613

B
Ben Dooks 已提交
614 615 616 617
config ARCH_S3C64XX
	bool "Samsung S3C64XX"
	select GENERIC_GPIO
	select HAVE_CLK
618
	select ARCH_HAS_CPUFREQ
B
Ben Dooks 已提交
619 620 621
	help
	  Samsung S3C64XX series based systems

622 623 624 625 626 627 628 629
config ARCH_S5PC1XX
	bool "Samsung S5PC1XX"
	select GENERIC_GPIO
	select HAVE_CLK
	select CPU_V7
	help
	  Samsung S5PC1XX series based systems

L
Linus Torvalds 已提交
630 631
config ARCH_SHARK
	bool "Shark"
632
	select CPU_SA110
633 634
	select ISA
	select ISA_DMA
635
	select ZONE_DMA
636
	select PCI
637 638 639
	help
	  Support for the StrongARM based Digital DNARD machine, also known
	  as "Shark" (<http://www.shark-linux.de/shark.html>).
L
Linus Torvalds 已提交
640 641 642

config ARCH_LH7A40X
	bool "Sharp LH7A40X"
643
	select CPU_ARM922T
644 645
	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
L
Linus Torvalds 已提交
646 647 648 649 650 651
	help
	  Say Y here for systems based on one of the Sharp LH7A40X
	  System on a Chip processors.  These CPUs include an ARM922T
	  core with a wide array of integrated devices for
	  hand-held and low-power applications.

652 653 654 655
config ARCH_U300
	bool "ST-Ericsson U300 Series"
	depends on MMU
	select CPU_ARM926T
656
	select HAVE_TCM
657 658 659 660 661 662 663 664 665 666
	select ARM_AMBA
	select ARM_VIC
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select HAVE_CLK
	select COMMON_CLKDEV
	select GENERIC_GPIO
	help
	  Support for ST-Ericsson U300 series mobile platforms.

667 668
config ARCH_DAVINCI
	bool "TI DaVinci"
669
	select CPU_ARM926T
670 671
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
672
	select GENERIC_GPIO
673
	select ARCH_REQUIRE_GPIOLIB
674
	select HAVE_CLK
675
	select ZONE_DMA
676
	select HAVE_IDE
677
	select COMMON_CLKDEV
D
David Brownell 已提交
678
	select GENERIC_ALLOCATOR
679 680 681
	help
	  Support for TI's DaVinci platform.

682 683 684
config ARCH_OMAP
	bool "TI OMAP"
	select GENERIC_GPIO
685
	select HAVE_CLK
M
Michael Buesch 已提交
686
	select ARCH_REQUIRE_GPIOLIB
687
	select ARCH_HAS_CPUFREQ
688
	select GENERIC_TIME
689
	select GENERIC_CLOCKEVENTS
690 691 692
	help
	  Support for TI's OMAP platform (OMAP1 and OMAP2).

693 694 695 696 697 698 699 700 701 702 703 704
config ARCH_BCMRING
	bool "Broadcom BCMRING"
	depends on MMU
	select CPU_V6
	select ARM_AMBA
	select COMMON_CLKDEV
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	select ARCH_WANT_OPTIONAL_GPIOLIB
	help
	  Support for Broadcom's BCMRing platform.

L
Linus Torvalds 已提交
705 706 707 708
endchoice

source "arch/arm/mach-clps711x/Kconfig"

709 710
source "arch/arm/mach-ep93xx/Kconfig"

L
Linus Torvalds 已提交
711 712
source "arch/arm/mach-footbridge/Kconfig"

713 714
source "arch/arm/mach-gemini/Kconfig"

L
Linus Torvalds 已提交
715 716
source "arch/arm/mach-integrator/Kconfig"

717 718 719
source "arch/arm/mach-iop32x/Kconfig"

source "arch/arm/mach-iop33x/Kconfig"
L
Linus Torvalds 已提交
720

721 722
source "arch/arm/mach-iop13xx/Kconfig"

L
Linus Torvalds 已提交
723 724 725 726
source "arch/arm/mach-ixp4xx/Kconfig"

source "arch/arm/mach-ixp2000/Kconfig"

727 728
source "arch/arm/mach-ixp23xx/Kconfig"

729 730
source "arch/arm/mach-loki/Kconfig"

731 732
source "arch/arm/mach-mv78xx0/Kconfig"

L
Linus Torvalds 已提交
733
source "arch/arm/mach-pxa/Kconfig"
734
source "arch/arm/plat-pxa/Kconfig"
L
Linus Torvalds 已提交
735

736 737
source "arch/arm/mach-mmp/Kconfig"

L
Linus Torvalds 已提交
738 739
source "arch/arm/mach-sa1100/Kconfig"

740 741 742
source "arch/arm/plat-omap/Kconfig"

source "arch/arm/mach-omap1/Kconfig"
L
Linus Torvalds 已提交
743

744 745
source "arch/arm/mach-omap2/Kconfig"

746
source "arch/arm/mach-orion5x/Kconfig"
747

748
source "arch/arm/mach-kirkwood/Kconfig"
749

750
source "arch/arm/plat-s3c24xx/Kconfig"
B
Ben Dooks 已提交
751
source "arch/arm/plat-s3c64xx/Kconfig"
752
source "arch/arm/plat-s3c/Kconfig"
753
source "arch/arm/plat-s5pc1xx/Kconfig"
754 755 756

if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
L
Linus Torvalds 已提交
757
source "arch/arm/mach-s3c2410/Kconfig"
758 759 760
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
source "arch/arm/mach-s3c2442/Kconfig"
761
source "arch/arm/mach-s3c2443/Kconfig"
762
endif
L
Linus Torvalds 已提交
763

B
Ben Dooks 已提交
764 765 766 767 768
if ARCH_S3C64XX
source "arch/arm/mach-s3c6400/Kconfig"
source "arch/arm/mach-s3c6410/Kconfig"
endif

769 770
source "arch/arm/plat-stmp3xxx/Kconfig"

771 772 773 774
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif

L
Linus Torvalds 已提交
775 776 777 778 779 780
source "arch/arm/mach-lh7a40x/Kconfig"

source "arch/arm/mach-h720x/Kconfig"

source "arch/arm/mach-versatile/Kconfig"

781 782
source "arch/arm/mach-aaec2000/Kconfig"

783 784
source "arch/arm/mach-realview/Kconfig"

785
source "arch/arm/mach-at91/Kconfig"
786

787 788
source "arch/arm/plat-mxc/Kconfig"

789 790
source "arch/arm/mach-nomadik/Kconfig"

791 792
source "arch/arm/mach-netx/Kconfig"

793 794
source "arch/arm/mach-ns9xxx/Kconfig"

795 796
source "arch/arm/mach-davinci/Kconfig"

797 798
source "arch/arm/mach-ks8695/Kconfig"

799 800
source "arch/arm/mach-msm/Kconfig"

801 802
source "arch/arm/mach-u300/Kconfig"

803 804
source "arch/arm/mach-w90x900/Kconfig"

805 806
source "arch/arm/mach-bcmring/Kconfig"

L
Linus Torvalds 已提交
807 808 809 810
# Definitions to make life easier
config ARCH_ACORN
	bool

811 812
config PLAT_IOP
	bool
M
Mikael Pettersson 已提交
813
	select GENERIC_CLOCKEVENTS
M
Mikael Pettersson 已提交
814
	select GENERIC_TIME
815

L
Lennert Buytenhek 已提交
816 817 818
config PLAT_ORION
	bool

819 820 821
config PLAT_PXA
	bool

L
Linus Torvalds 已提交
822 823
source arch/arm/mm/Kconfig

824 825
config IWMMXT
	bool "Enable iWMMXt support"
826 827
	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
	default y if PXA27x || PXA3xx || ARCH_MMP
828 829 830 831
	help
	  Enable support for iWMMXt context switching at run time if
	  running on a CPU that supports it.

L
Linus Torvalds 已提交
832 833 834 835 836 837
#  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
	bool
	depends on CPU_XSCALE && !XSCALE_PMU_TIMER
	default y

838 839 840 841
if !MMU
source "arch/arm/Kconfig-nommu"
endif

842 843 844 845 846 847 848 849 850
config ARM_ERRATA_411920
	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
	depends on CPU_V6 && !SMP
	help
	  Invalidation of the Instruction Cache operation can
	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
	  It does not affect the MPCore. This option enables the ARM Ltd.
	  recommended workaround.

851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866
config ARM_ERRATA_430973
	bool "ARM errata: Stale prediction on replaced interworking branch"
	depends on CPU_V7
	help
	  This option enables the workaround for the 430973 Cortex-A8
	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
	  interworking branch is replaced with another code sequence at the
	  same virtual address, whether due to self-modifying code or virtual
	  to physical address re-mapping, Cortex-A8 does not recover from the
	  stale interworking branch prediction. This results in Cortex-A8
	  executing the new code sequence in the incorrect ARM or Thumb state.
	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
	  and also flushes the branch target cache at every context switch.
	  Note that setting specific bits in the ACTLR register may not be
	  available in non-secure mode.

867 868 869 870 871 872 873 874 875 876 877 878 879
config ARM_ERRATA_458693
	bool "ARM errata: Processor deadlock when a false hazard is created"
	depends on CPU_V7
	help
	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
	  erratum. For very specific sequences of memory operations, it is
	  possible for a hazard condition intended for a cache line to instead
	  be incorrectly associated with a different cache line. This false
	  hazard might then cause a processor deadlock. The workaround enables
	  the L1 caching of the NEON accesses and disables the PLD instruction
	  in the ACTLR register. Note that setting specific bits in the ACTLR
	  register may not be available in non-secure mode.

880 881 882 883 884 885 886 887 888 889 890 891
config ARM_ERRATA_460075
	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
	depends on CPU_V7
	help
	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
	  erratum. Any asynchronous access to the L2 cache may encounter a
	  situation in which recent store transactions to the L2 cache are lost
	  and overwritten with stale memory contents from external memory. The
	  workaround disables the write-allocate mode for the L2 cache via the
	  ACTLR register. Note that setting specific bits in the ACTLR register
	  may not be available in non-secure mode.

L
Linus Torvalds 已提交
892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914
endmenu

source "arch/arm/common/Kconfig"

config FORCE_MAX_ZONEORDER
	int
	depends on SA1111
	default "9"

menu "Bus support"

config ARM_AMBA
	bool

config ISA
	bool
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

915
# Select ISA DMA controller support
L
Linus Torvalds 已提交
916 917
config ISA_DMA
	bool
918
	select ISA_DMA_API
L
Linus Torvalds 已提交
919

920
# Select ISA DMA interface
A
Al Viro 已提交
921 922 923
config ISA_DMA_API
	bool

L
Linus Torvalds 已提交
924
config PCI
M
Mike Rapoport 已提交
925
	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
L
Linus Torvalds 已提交
926 927 928 929 930 931
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

932 933 934
config PCI_SYSCALL
	def_bool PCI

L
Linus Torvalds 已提交
935 936 937 938 939 940
# Select the host bridge type
config PCI_HOST_VIA82C505
	bool
	depends on PCI && ARCH_SHARK
	default y

M
Mike Rapoport 已提交
941 942 943 944 945 946
config PCI_HOST_ITE8152
	bool
	depends on PCI && MACH_ARMCORE
	default y
	select DMABOUNCE

L
Linus Torvalds 已提交
947 948 949 950 951 952 953 954
source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

endmenu

menu "Kernel Features"

955 956
source "kernel/time/Kconfig"

L
Linus Torvalds 已提交
957 958
config SMP
	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
959 960
	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
961
	depends on GENERIC_CLOCKEVENTS
962
	select USE_GENERIC_SMP_HELPERS
963
	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
L
Linus Torvalds 已提交
964 965 966 967 968 969 970 971 972 973 974
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all, single
	  processor machines. On a single processor machine, the kernel will
	  run faster if you say N here.

A
Adrian Bunk 已提交
975
	  See also <file:Documentation/i386/IO-APIC.txt>,
L
Linus Torvalds 已提交
976 977 978 979 980
	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
	  <http://www.linuxdoc.org/docs.html#howto>.

	  If you don't know what to do here, say N.

981 982 983 984 985 986
config HAVE_ARM_SCU
	bool
	depends on SMP
	help
	  This option enables support for the ARM system coherency unit

987 988 989 990 991 992
config HAVE_ARM_TWD
	bool
	depends on SMP
	help
	  This options enables support for the ARM timer and watchdog unit

993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015
choice
	prompt "Memory split"
	default VMSPLIT_3G
	help
	  Select the desired split between kernel and user memory.

	  If you are not absolutely sure what you are doing, leave this
	  option alone!

	config VMSPLIT_3G
		bool "3G/1G user/kernel split"
	config VMSPLIT_2G
		bool "2G/2G user/kernel split"
	config VMSPLIT_1G
		bool "1G/3G user/kernel split"
endchoice

config PAGE_OFFSET
	hex
	default 0x40000000 if VMSPLIT_1G
	default 0x80000000 if VMSPLIT_2G
	default 0xC0000000

L
Linus Torvalds 已提交
1016 1017 1018 1019 1020 1021
config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "4"

1022 1023 1024 1025 1026 1027 1028
config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	depends on SMP && HOTPLUG && EXPERIMENTAL
	help
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu.

1029 1030
config LOCAL_TIMERS
	bool "Use local timer interrupts"
1031 1032
	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
1033
	default y
1034
	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
1035 1036 1037 1038 1039 1040
	help
	  Enable support for local timers on SMP platforms, rather then the
	  legacy IPI broadcast method.  Local timers allows the system
	  accounting to be spread across the timer interval, preventing a
	  "thundering herd" at every timer tick.

1041
source kernel/Kconfig.preempt
L
Linus Torvalds 已提交
1042

1043 1044 1045 1046
config HZ
	int
	default 128 if ARCH_L7200
	default 200 if ARCH_EBSA110 || ARCH_S3C2410
1047
	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
1048
	default AT91_TIMER_HZ if ARCH_AT91
1049 1050
	default 100

1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062
config THUMB2_KERNEL
	bool "Compile the kernel in Thumb-2 mode"
	depends on CPU_V7 && EXPERIMENTAL
	select AEABI
	select ARM_ASM_UNIFIED
	help
	  By enabling this option, the kernel will be compiled in
	  Thumb-2 mode. A compiler/assembler that understand the unified
	  ARM-Thumb syntax is needed.

	  If unsure, say N.

1063 1064 1065
config ARM_ASM_UNIFIED
	bool

1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080
config AEABI
	bool "Use the ARM EABI to compile the kernel"
	help
	  This option allows for the kernel to be compiled using the latest
	  ARM ABI (aka EABI).  This is only useful if you are using a user
	  space environment that is also compiled with EABI.

	  Since there are major incompatibilities between the legacy ABI and
	  EABI, especially with regard to structure member alignment, this
	  option also changes the kernel syscall calling convention to
	  disambiguate both ABIs and allow for backward compatibility support
	  (selected with CONFIG_OABI_COMPAT).

	  To use this you need GCC version 4.0.0 or later.

1081
config OABI_COMPAT
1082
	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1083
	depends on AEABI && EXPERIMENTAL
1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097
	default y
	help
	  This option preserves the old syscall interface along with the
	  new (ARM EABI) one. It also provides a compatibility layer to
	  intercept syscalls that have structure arguments which layout
	  in memory differs between the legacy ABI and the new ARM EABI
	  (only for non "thumb" binaries). This option adds a tiny
	  overhead to all syscalls and produces a slightly larger kernel.
	  If you know you'll be using only pure EABI user space then you
	  can say N here. If this option is not selected and you attempt
	  to execute a legacy ABI binary then the result will be
	  UNPREDICTABLE (in fact it can be predicted that it won't work
	  at all). If in doubt say Y.

1098
config ARCH_HAS_HOLES_MEMORYMODEL
1099 1100
	bool

1101
# Discontigmem is deprecated
1102
config ARCH_DISCONTIGMEM_ENABLE
L
Linus Torvalds 已提交
1103 1104
	bool

1105 1106 1107
config ARCH_SPARSEMEM_ENABLE
	bool

1108 1109 1110
config ARCH_SPARSEMEM_DEFAULT
	def_bool ARCH_SPARSEMEM_ENABLE

1111
config ARCH_SELECT_MEMORY_MODEL
1112
	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
1113

Y
Yasunori Goto 已提交
1114 1115 1116 1117 1118 1119
config NODES_SHIFT
	int
	default "4" if ARCH_LH7A40X
	default "2"
	depends on NEED_MULTIPLE_NODES

N
Nicolas Pitre 已提交
1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136
config HIGHMEM
	bool "High Memory Support (EXPERIMENTAL)"
	depends on MMU && EXPERIMENTAL
	help
	  The address space of ARM processors is only 4 Gigabytes large
	  and it has to accommodate user address space, kernel address
	  space as well as some memory mapped IO. That means that, if you
	  have a large amount of physical memory and/or IO, not all of the
	  memory can be "permanently mapped" by the kernel. The physical
	  memory that is not permanently mapped is called "high memory".

	  Depending on the selected kernel/user memory split, minimum
	  vmalloc space and actual amount of RAM, you may not need this
	  option which should result in a slightly faster kernel.

	  If unsure, say n.

R
Russell King 已提交
1137 1138 1139 1140 1141
config HIGHPTE
	bool "Allocate 2nd-level pagetables from highmem"
	depends on HIGHMEM
	depends on !OUTER_CACHE

1142 1143
source "mm/Kconfig"

L
Linus Torvalds 已提交
1144 1145
config LEDS
	bool "Timer and CPU usage LEDs"
1146
	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
1147
		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
L
Linus Torvalds 已提交
1148 1149
		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
1150
		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
1151
		   ARCH_AT91 || ARCH_DAVINCI || \
1152
		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
L
Linus Torvalds 已提交
1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165
	help
	  If you say Y here, the LEDs on your machine will be used
	  to provide useful information about your current system status.

	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
	  be able to select which LEDs are active using the options below. If
	  you are compiling a kernel for the EBSA-110 or the LART however, the
	  red LED will simply flash regularly to indicate that the system is
	  still functional. It is safe to say Y here if you have a CATS
	  system, but the driver will do nothing.

config LEDS_TIMER
	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
D
David Brownell 已提交
1166 1167
			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
			    || MACH_OMAP_PERSEUS2
L
Linus Torvalds 已提交
1168
	depends on LEDS
1169
	depends on !GENERIC_CLOCKEVENTS
L
Linus Torvalds 已提交
1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183
	default y if ARCH_EBSA110
	help
	  If you say Y here, one of the system LEDs (the green one on the
	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
	  will flash regularly to indicate that the system is still
	  operational. This is mainly useful to kernel hackers who are
	  debugging unstable kernels.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config LEDS_CPU
	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
D
David Brownell 已提交
1184 1185 1186
			!ARCH_OMAP) \
			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
			|| MACH_OMAP_PERSEUS2
L
Linus Torvalds 已提交
1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198
	depends on LEDS
	help
	  If you say Y here, the red LED will be used to give a good real
	  time indication of CPU usage, by lighting whenever the idle task
	  is not currently executing.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config ALIGNMENT_TRAP
	bool
1199
	depends on CPU_CP15_MMU
L
Linus Torvalds 已提交
1200 1201
	default y if !ARCH_EBSA110
	help
1202
	  ARM processors cannot fetch/store information which is not
L
Linus Torvalds 已提交
1203 1204 1205 1206 1207 1208 1209
	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
	  address divisible by 4. On 32-bit ARM processors, these non-aligned
	  fetch/store instructions will be emulated in software if you say
	  here, which has a severe performance impact. This is necessary for
	  correct operation of some network protocols. With an IP-only
	  configuration it is safe to say N, otherwise say Y.

1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225
config UACCESS_WITH_MEMCPY
	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
	depends on MMU && EXPERIMENTAL
	default y if CPU_FEROCEON
	help
	  Implement faster copy_to_user and clear_user methods for CPU
	  cores where a 8-word STM instruction give significantly higher
	  memory write throughput than a sequence of individual 32bit stores.

	  A possible side effect is a slight increase in scheduling latency
	  between threads sharing the same address space if they invoke
	  such copy operations with large buffers.

	  However, if the CPU data cache is using a write-allocate mode,
	  this option is unlikely to provide any performance gain.

L
Linus Torvalds 已提交
1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246
endmenu

menu "Boot options"

# Compressed boot loader in ROM.  Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
	hex "Compressed ROM boot loader base address"
	default "0"
	help
	  The physical address at which the ROM-able zImage is to be
	  placed in the target.  Platforms which normally make use of
	  ROM-able zImage formats normally set this to a suitable
	  value in their defconfig file.

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM_BSS
	hex "Compressed ROM boot loader BSS address"
	default "0"
	help
1247 1248 1249 1250 1251 1252
	  The base address of an area of read/write memory in the target
	  for the ROM-able zImage which must be available while the
	  decompressor is running. It must be large enough to hold the
	  entire decompressed kernel plus an additional 128 KiB.
	  Platforms which normally make use of ROM-able zImage formats
	  normally set this to a suitable value in their defconfig file.
L
Linus Torvalds 已提交
1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM
	bool "Compressed boot loader in ROM/flash"
	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
	help
	  Say Y here if you intend to execute your compressed kernel image
	  (zImage) directly from ROM or flash.  If unsure, say N.

config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  On some architectures (EBSA110 and CATS), there is currently no way
	  for the boot loader to pass arguments to the kernel. For these
	  architectures, you should supply some command-line options at build
	  time by entering them here. As a minimum, you should specify the
	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

config XIP_KERNEL
	bool "Kernel Execute-In-Place from ROM"
	depends on !ZBOOT_ROM
	help
	  Execute-In-Place allows the kernel to run from non-volatile storage
	  directly addressable by the CPU, such as NOR flash. This saves RAM
	  space since the text section of the kernel is not loaded from flash
	  to RAM.  Read-write sections, such as the data section and stack,
	  are still copied to RAM.  The XIP kernel is not compressed since
	  it has to run directly from flash, so it will take more space to
	  store it.  The flash address used to link the kernel object files,
	  and for storing it, is configuration dependent. Therefore, if you
	  say Y here, you must know the proper physical address where to
	  store the kernel image depending on your own flash memory usage.

	  Also note that the make target becomes "make xipImage" rather than
	  "make zImage" or "make Image".  The final kernel binary to put in
	  ROM memory will be arch/arm/boot/xipImage.

	  If unsure, say N.

config XIP_PHYS_ADDR
	hex "XIP Kernel Physical Location"
	depends on XIP_KERNEL
	default "0x00080000"
	help
	  This is the physical address in your flash memory the kernel will
	  be linked for and stored to.  This address is dependent on your
	  own flash usage.

R
Richard Purdie 已提交
1303 1304 1305 1306 1307 1308
config KEXEC
	bool "Kexec system call (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
M
Matt LaPlante 已提交
1309
	  but it is independent of the system firmware.   And like a reboot
R
Richard Purdie 已提交
1310 1311 1312 1313 1314 1315 1316
	  you can start any kernel with it, not just Linux.

	  It is an ongoing process to be certain the hardware in a machine
	  is properly shutdown, so do not be surprised if this code does not
	  initially work for you.  It may help to enable device hotplugging
	  support.

1317 1318
config ATAGS_PROC
	bool "Export atags in procfs"
1319 1320
	depends on KEXEC
	default y
1321 1322 1323 1324
	help
	  Should the atags used to boot the kernel be exported in an "atags"
	  file in procfs. Useful with kexec.

L
Linus Torvalds 已提交
1325 1326
endmenu

1327
menu "CPU Power Management"
L
Linus Torvalds 已提交
1328

1329
if ARCH_HAS_CPUFREQ
L
Linus Torvalds 已提交
1330 1331 1332 1333 1334

source "drivers/cpufreq/Kconfig"

config CPU_FREQ_SA1100
	bool
1335
	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
L
Linus Torvalds 已提交
1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353
	default y

config CPU_FREQ_SA1110
	bool
	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
	default y

config CPU_FREQ_INTEGRATOR
	tristate "CPUfreq driver for ARM Integrator CPUs"
	depends on ARCH_INTEGRATOR && CPU_FREQ
	default y
	help
	  This enables the CPUfreq driver for ARM Integrator CPUs.

	  For details, take a look at <file:Documentation/cpu-freq>.

	  If in doubt, say Y.

R
Russell King 已提交
1354 1355 1356 1357 1358 1359
config CPU_FREQ_PXA
	bool
	depends on CPU_FREQ && ARCH_PXA && PXA25x
	default y
	select CPU_FREQ_DEFAULT_GOV_USERSPACE

1360 1361 1362 1363
config CPU_FREQ_S3C64XX
	bool "CPUfreq support for Samsung S3C64XX CPUs"
	depends on CPU_FREQ && CPU_S3C6410

B
Ben Dooks 已提交
1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403
config CPU_FREQ_S3C
	bool
	help
	  Internal configuration node for common cpufreq on Samsung SoC

config CPU_FREQ_S3C24XX
	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
	select CPU_FREQ_S3C
	help
	  This enables the CPUfreq driver for the Samsung S3C24XX family
	  of CPUs.

	  For details, take a look at <file:Documentation/cpu-freq>.

	  If in doubt, say N.

config CPU_FREQ_S3C24XX_PLL
	bool "Support CPUfreq changing of PLL frequency"
	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
	help
	  Compile in support for changing the PLL frequency from the
	  S3C24XX series CPUfreq driver. The PLL takes time to settle
	  after a frequency change, so by default it is not enabled.

	  This also means that the PLL tables for the selected CPU(s) will
	  be built which may increase the size of the kernel image.

config CPU_FREQ_S3C24XX_DEBUG
	bool "Debug CPUfreq Samsung driver core"
	depends on CPU_FREQ_S3C24XX
	help
	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core

config CPU_FREQ_S3C24XX_IODEBUG
	bool "Debug CPUfreq Samsung driver IO timing"
	depends on CPU_FREQ_S3C24XX
	help
	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core

1404 1405 1406 1407 1408 1409
config CPU_FREQ_S3C24XX_DEBUGFS
	bool "Export debugfs for CPUFreq"
	depends on CPU_FREQ_S3C24XX && DEBUG_FS
	help
	  Export status information via debugfs.

L
Linus Torvalds 已提交
1410 1411
endif

1412 1413 1414 1415
source "drivers/cpuidle/Kconfig"

endmenu

L
Linus Torvalds 已提交
1416 1417 1418 1419 1420 1421
menu "Floating point emulation"

comment "At least one emulation must be selected"

config FPE_NWFPE
	bool "NWFPE math emulation"
1422
	depends on !AEABI || OABI_COMPAT
L
Linus Torvalds 已提交
1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433
	---help---
	  Say Y to include the NWFPE floating point emulator in the kernel.
	  This is necessary to run most binaries. Linux does not currently
	  support floating point hardware so you need to say Y here even if
	  your machine has an FPA or floating point co-processor podule.

	  You may say N here if you are going to load the Acorn FPEmulator
	  early in the bootup.

config FPE_NWFPE_XP
	bool "Support extended precision"
1434
	depends on FPE_NWFPE
L
Linus Torvalds 已提交
1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445
	help
	  Say Y to include 80-bit support in the kernel floating-point
	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
	  Note that gcc does not generate 80-bit operations by default,
	  so in most cases this option only enlarges the size of the
	  floating point emulator without any good reason.

	  You almost surely want to say N here.

config FPE_FASTFPE
	bool "FastFPE math emulation (EXPERIMENTAL)"
1446
	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
L
Linus Torvalds 已提交
1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459
	---help---
	  Say Y here to include the FAST floating point emulator in the kernel.
	  This is an experimental much faster emulator which now also has full
	  precision for the mantissa.  It does not support any exceptions.
	  It is very simple, and approximately 3-6 times faster than NWFPE.

	  It should be sufficient for most programs.  It may be not suitable
	  for scientific calculations, but you have to check this for yourself.
	  If you do not feel you need a faster FP emulation you should better
	  choose NWFPE.

config VFP
	bool "VFP-format floating point maths"
R
Russell King 已提交
1460
	depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
L
Linus Torvalds 已提交
1461 1462 1463 1464 1465 1466 1467 1468 1469
	help
	  Say Y to include VFP support code in the kernel. This is needed
	  if your hardware includes a VFP unit.

	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
	  release notes and additional status information.

	  Say N if your target does not have VFP hardware.

1470 1471 1472 1473 1474
config VFPv3
	bool
	depends on VFP
	default y if CPU_V7

1475 1476 1477 1478 1479 1480 1481
config NEON
	bool "Advanced SIMD (NEON) Extension support"
	depends on VFPv3 && CPU_V7
	help
	  Say Y to include support code for NEON, the ARMv7 Advanced SIMD
	  Extension.

L
Linus Torvalds 已提交
1482 1483 1484 1485 1486 1487 1488 1489
endmenu

menu "Userspace binary formats"

source "fs/Kconfig.binfmt"

config ARTHUR
	tristate "RISC OS personality"
1490
	depends on !AEABI
L
Linus Torvalds 已提交
1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501
	help
	  Say Y here to include the kernel code necessary if you want to run
	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
	  experimental; if this sounds frightening, say N and sleep in peace.
	  You can also say M here to compile this support as a module (which
	  will be called arthur).

endmenu

menu "Power management options"

R
Russell King 已提交
1502
source "kernel/power/Kconfig"
L
Linus Torvalds 已提交
1503

J
Johannes Berg 已提交
1504 1505 1506
config ARCH_SUSPEND_POSSIBLE
	def_bool y

L
Linus Torvalds 已提交
1507 1508
endmenu

1509 1510
source "net/Kconfig"

1511
source "drivers/Kconfig"
L
Linus Torvalds 已提交
1512 1513 1514 1515 1516 1517 1518 1519 1520 1521

source "fs/Kconfig"

source "arch/arm/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"