Kconfig 17.1 KB
Newer Older
1
#
2 3 4 5
# RTC class/drivers configuration
#

config RTC_LIB
A
Alessandro Zummo 已提交
6 7
	tristate

J
Jan Engelhardt 已提交
8 9
menuconfig RTC_CLASS
	tristate "Real Time Clock"
A
Alessandro Zummo 已提交
10
	default n
J
Jan Engelhardt 已提交
11
	depends on !S390
A
Alessandro Zummo 已提交
12 13 14 15
	select RTC_LIB
	help
	  Generic RTC class support. If you say yes here, you will
 	  be allowed to plug one or more RTCs to your system. You will
16
	  probably want to enable one or more of the interfaces below.
A
Alessandro Zummo 已提交
17 18

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
19
	  will be called rtc-core.
A
Alessandro Zummo 已提交
20

J
Jan Engelhardt 已提交
21 22
if RTC_CLASS

A
Alessandro Zummo 已提交
23
config RTC_HCTOSYS
24
	bool "Set system time from RTC on startup and resume"
A
Alessandro Zummo 已提交
25 26 27
	depends on RTC_CLASS = y
	default y
	help
28 29 30
	  If you say yes here, the system time (wall clock) will be set using
	  the value read from a specified RTC device. This is useful to avoid
	  unnecessary fsck runs at boot time, and to network better.
A
Alessandro Zummo 已提交
31 32

config RTC_HCTOSYS_DEVICE
33
	string "RTC used to set the system time"
A
Alessandro Zummo 已提交
34 35 36
	depends on RTC_HCTOSYS = y
	default "rtc0"
	help
37 38
	  The RTC device that will be used to (re)initialize the system
	  clock, usually rtc0.  Initialization is done when the system
39 40 41
	  starts up, and when it resumes from a low power state.  This
	  device should record time in UTC, since the kernel won't do
	  timezone correction.
42

43 44 45
	  The driver for this RTC device must be loaded before late_initcall
	  functions run, so it must usually be statically linked.

46 47 48 49 50 51
	  This clock should be battery-backed, so that it reads the correct
	  time when the system boots from a power-off state.  Otherwise, your
	  system will need an external clock source (like an NTP server).

	  If the clock you specify here is not battery backed, it may still
	  be useful to reinitialize system time when resuming from system
52
	  sleep states. Do not specify an RTC here unless it stays powered
53
	  during all this system's supported sleep states.
A
Alessandro Zummo 已提交
54

55 56 57 58 59 60 61
config RTC_DEBUG
	bool "RTC debug support"
	depends on RTC_CLASS = y
	help
	  Say yes here to enable debugging support in the RTC framework
	  and individual RTC drivers.

A
Alessandro Zummo 已提交
62 63
comment "RTC interfaces"

64
config RTC_INTF_SYSFS
D
David Brownell 已提交
65
	boolean "/sys/class/rtc/rtcN (sysfs)"
J
Jan Engelhardt 已提交
66
	depends on SYSFS
67 68
	default RTC_CLASS
	help
69 70
	  Say yes here if you want to use your RTCs using sysfs interfaces,
	  /sys/class/rtc/rtc0 through /sys/.../rtcN.
71 72 73 74

	  This driver can also be built as a module. If so, the module
	  will be called rtc-sysfs.

75
config RTC_INTF_PROC
D
David Brownell 已提交
76
	boolean "/proc/driver/rtc (procfs for rtc0)"
J
Jan Engelhardt 已提交
77
	depends on PROC_FS
78 79
	default RTC_CLASS
	help
80 81 82
	  Say yes here if you want to use your first RTC through the proc
	  interface, /proc/driver/rtc.  Other RTCs will not be available
	  through that API.
83 84 85 86

	  This driver can also be built as a module. If so, the module
	  will be called rtc-proc.

87
config RTC_INTF_DEV
D
David Brownell 已提交
88
	boolean "/dev/rtcN (character devices)"
89 90
	default RTC_CLASS
	help
91 92 93 94 95
	  Say yes here if you want to use your RTCs using the /dev
	  interfaces, which "udev" sets up as /dev/rtc0 through
	  /dev/rtcN.  You may want to set up a symbolic link so one
	  of these can be accessed as /dev/rtc, which is a name
	  expected by "hwclock" and some other programs.
96 97 98 99

	  This driver can also be built as a module. If so, the module
	  will be called rtc-dev.

100 101 102 103
config RTC_INTF_DEV_UIE_EMUL
	bool "RTC UIE emulation on dev interface"
	depends on RTC_INTF_DEV
	help
104
	  Provides an emulation for RTC_UIE if the underlying rtc chip
105 106
	  driver does not expose RTC_UIE ioctls.  Those requests generate
	  once-per-second update interrupts, used for synchronization.
107

A
Alessandro Zummo 已提交
108 109
config RTC_DRV_TEST
	tristate "Test driver/device"
110 111
	help
	  If you say yes here you get support for the
A
Alessandro Zummo 已提交
112 113 114 115 116 117
	  RTC test driver. It's a software RTC which can be
	  used to test the RTC subsystem APIs. It gets
	  the time from the system clock.
	  You want this driver only if you are doing development
	  on the RTC subsystem. Please read the source code
	  for further details.
118 119

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
120 121 122
	  will be called rtc-test.

comment "I2C RTC drivers"
J
Jan Engelhardt 已提交
123 124 125
	depends on I2C

if I2C
126

127
config RTC_DRV_DS1307
A
Alessandro Zummo 已提交
128
	tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00"
129 130 131 132 133 134 135 136 137
	help
	  If you say yes here you get support for various compatible RTC
	  chips (often with battery backup) connected with I2C.  This driver
	  should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
	  and probably other chips.  In some cases the RTC must already
	  have been initialized (by manufacturing or a bootloader).

	  The first seven registers on these chips hold an RTC, and other
	  registers may add features such as NVRAM, a trickle charger for
D
David Brownell 已提交
138 139
	  the RTC/NVRAM backup power, and alarms.  NVRAM is visible in
	  sysfs, but other chip features may not be available.
140 141 142 143

	  This driver can also be built as a module. If so, the module
	  will be called rtc-ds1307.

S
Scott Wood 已提交
144
config RTC_DRV_DS1374
145
	tristate "Dallas/Maxim DS1374"
S
Scott Wood 已提交
146 147 148 149 150 151 152 153 154
	depends on RTC_CLASS && I2C
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1374 real-time clock chips.  If an interrupt is associated
	  with the device, the alarm functionality is supported.

	  This driver can also be built as a module.  If so, the module
	  will be called rtc-ds1374.

A
Alessandro Zummo 已提交
155 156
config RTC_DRV_DS1672
	tristate "Dallas/Maxim DS1672"
157 158
	help
	  If you say yes here you get support for the
A
Alessandro Zummo 已提交
159
	  Dallas/Maxim DS1672 timekeeping chip.
160 161

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
162
	  will be called rtc-ds1672.
163

A
Alessandro Zummo 已提交
164
config RTC_DRV_MAX6900
165
	tristate "Maxim MAX6900"
166
	help
A
Alessandro Zummo 已提交
167 168
	  If you say yes here you will get support for the
	  Maxim MAX6900 I2C RTC chip.
169 170

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
171
	  will be called rtc-max6900.
172

A
Alessandro Zummo 已提交
173
config RTC_DRV_RS5C372
174
	tristate "Ricoh RS5C372A/B, RV5C386, RV5C387A"
175 176
	help
	  If you say yes here you get support for the
177
	  Ricoh RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
178 179

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
180
	  will be called rtc-rs5c372.
181

A
Alessandro Zummo 已提交
182
config RTC_DRV_ISL1208
183
	tristate "Intersil ISL1208"
184 185
	help
	  If you say yes here you get support for the
186
	  Intersil ISL1208 RTC chip.
187 188

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
189
	  will be called rtc-isl1208.
190

A
Alessandro Zummo 已提交
191 192
config RTC_DRV_X1205
	tristate "Xicor/Intersil X1205"
D
David Brownell 已提交
193
	help
A
Alessandro Zummo 已提交
194 195 196 197 198
	  If you say yes here you get support for the
	  Xicor/Intersil X1205 RTC chip.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-x1205.
D
David Brownell 已提交
199

200 201 202 203 204 205 206 207 208 209
config RTC_DRV_PCF8563
	tristate "Philips PCF8563/Epson RTC8564"
	help
	  If you say yes here you get support for the
	  Philips PCF8563 RTC chip. The Epson RTC8564
	  should work as well.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-pcf8563.

210 211 212
config RTC_DRV_PCF8583
	tristate "Philips PCF8583"
	help
213
	  If you say yes here you get support for the Philips PCF8583
A
Alessandro Zummo 已提交
214
	  RTC chip found on Acorn RiscPCs. This driver supports the
215
	  platform specific method of retrieving the current year from
A
Alessandro Zummo 已提交
216 217
	  the RTC's SRAM. It will work on other platforms with the same
	  chip, but the year will probably have to be tweaked.
218 219 220 221

	  This driver can also be built as a module. If so, the module
	  will be called rtc-pcf8583.

A
Atsushi Nemoto 已提交
222
config RTC_DRV_M41T80
223
	tristate "ST M41T80/81/82/83/84/85/87"
A
Atsushi Nemoto 已提交
224 225 226 227 228 229 230 231 232
	help
	  If you say Y here you will get support for the
	  ST M41T80 RTC chips series. Currently following chips are
	  supported: M41T80, M41T81, M41T82, M41T83, M41ST84, M41ST85
	  and M41ST87.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-m41t80.

233 234 235 236 237 238 239
config RTC_DRV_M41T80_WDT
	bool "ST M41T80 series RTC watchdog timer"
	depends on RTC_DRV_M41T80
	help
	  If you say Y here you will get support for the
	  watchdog timer in ST M41T80 RTC chips series.

240 241
config RTC_DRV_TWL92330
	boolean "TI TWL92330/Menelaus"
J
Jan Engelhardt 已提交
242
	depends on MENELAUS
243 244
	help
	  If you say yes here you get support for the RTC on the
M
Matt LaPlante 已提交
245
	  TWL92330 "Menelaus" power management chip, used with OMAP2
246 247 248
	  platforms.  The support is integrated with the rest of
	  the Menelaus driver; it's not separate module.

249 250
config RTC_DRV_S35390A
	tristate "Seiko Instruments S-35390A"
251
	select BITREVERSE
252 253 254 255 256 257 258
	help
	  If you say yes here you will get support for the Seiko
	  Instruments S-35390A.

	  This driver can also be built as a module. If so the module
	  will be called rtc-s35390a.

S
Sergey Lapin 已提交
259 260 261 262 263 264 265 266 267 268 269
config RTC_DRV_FM3130
	tristate "Ramtron FM3130"
	help
	  If you say Y here you will get support for the
	  Ramtron FM3130 RTC chips.
	  Ramtron FM3130 is a chip with two separate devices inside,
	  RTC clock and FRAM. This driver provides only RTC functionality.

	  This driver can also be built as a module. If so the module
	  will be called rtc-fm3130.

J
Jan Engelhardt 已提交
270 271
endif # I2C

A
Alessandro Zummo 已提交
272
comment "SPI RTC drivers"
J
Jan Engelhardt 已提交
273 274

if SPI_MASTER
A
Alessandro Zummo 已提交
275

276 277 278 279 280 281 282 283 284
config RTC_DRV_M41T94
	tristate "ST M41T94"
	help
	  If you say yes here you will get support for the
	  ST M41T94 SPI RTC chip.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-m41t94.

285 286 287 288 289 290 291 292 293
config RTC_DRV_MAX6902
	tristate "Maxim MAX6902"
	help
	  If you say yes here you will get support for the
	  Maxim MAX6902 SPI RTC chip.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-max6902.

294 295 296 297 298 299 300 301 302
config RTC_DRV_R9701
	tristate "Epson RTC-9701JE"
	help
	  If you say yes here you will get support for the
	  Epson RTC-9701JE SPI RTC chip.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-r9701.

303 304 305 306 307 308 309 310 311
config RTC_DRV_RS5C348
	tristate "Ricoh RS5C348A/B"
	help
	  If you say yes here you get support for the
	  Ricoh RS5C348A and RS5C348B RTC chips.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-rs5c348.

J
Jan Engelhardt 已提交
312 313
endif # SPI_MASTER

A
Alessandro Zummo 已提交
314 315 316 317 318 319 320 321
comment "Platform RTC drivers"

# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
# requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
# global rtc_lock ... it's not yet just another platform_device.

config RTC_DRV_CMOS
	tristate "PC-style 'CMOS'"
J
Jan Engelhardt 已提交
322
	depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS
323
	default y if X86
A
Alessandro Zummo 已提交
324 325 326 327 328 329 330 331 332 333 334 335 336 337 338
	help
	  Say "yes" here to get direct support for the real time clock
	  found in every PC or ACPI-based system, and some other boards.
	  Specifically the original MC146818, compatibles like those in
	  PC south bridges, the DS12887 or M48T86, some multifunction
	  or LPC bus chips, and so on.

	  Your system will need to define the platform device used by
	  this driver, otherwise it won't be accessible.  This means
	  you can safely enable this driver if you don't know whether
	  or not your board has this kind of hardware.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-cmos.

339 340
config RTC_DRV_DS1216
	tristate "Dallas DS1216"
J
Jan Engelhardt 已提交
341
	depends on SNI_RM
342 343 344
	help
	  If you say yes here you get support for the Dallas DS1216 RTC chips.

P
Paul Mundt 已提交
345 346 347 348 349 350
config RTC_DRV_DS1302
	tristate "Dallas DS1302"
	depends on SH_SECUREEDGE5410
	help
	  If you say yes here you get support for the Dallas DS1302 RTC chips.

351 352 353 354 355 356 357 358 359 360
config RTC_DRV_DS1511
	tristate "Dallas DS1511"
	depends on RTC_CLASS
	help
	  If you say yes here you get support for the
	  Dallas DS1511 timekeeping/watchdog chip.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-ds1511.

A
Alessandro Zummo 已提交
361
config RTC_DRV_DS1553
362
	tristate "Maxim/Dallas DS1553"
363 364
	help
	  If you say yes here you get support for the
365
	  Maxim/Dallas DS1553 timekeeping chip.
366 367

	  This driver can also be built as a module. If so, the module
A
Alessandro Zummo 已提交
368 369
	  will be called rtc-ds1553.

370 371
config RTC_DRV_DS1742
	tristate "Maxim/Dallas DS1742/1743"
372 373
	help
	  If you say yes here you get support for the
374
	  Maxim/Dallas DS1742/1743 timekeeping chip.
375 376

	  This driver can also be built as a module. If so, the module
377
	  will be called rtc-ds1742.
378

379 380 381
config RTC_DRV_STK17TA8
	tristate "Simtek STK17TA8"
	depends on RTC_CLASS
A
Alessandro Zummo 已提交
382 383
	help
	  If you say yes here you get support for the
384
	  Simtek STK17TA8 timekeeping chip.
A
Alessandro Zummo 已提交
385 386

	  This driver can also be built as a module. If so, the module
387
	  will be called rtc-stk17ta8.
A
Alessandro Zummo 已提交
388 389 390 391 392 393 394 395 396 397

config RTC_DRV_M48T86
	tristate "ST M48T86/Dallas DS12887"
	help
	  If you say Y here you will get support for the
	  ST M48T86 and Dallas DS12887 RTC chips.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-m48t86.

398 399 400 401 402 403 404 405 406
config RTC_DRV_M48T59
	tristate "ST M48T59"
	help
	  If you say Y here you will get support for the
	  ST M48T59 RTC chip.

	  This driver can also be built as a module, if so, the module
	  will be called "rtc-m48t59".

A
Alessandro Zummo 已提交
407 408 409 410 411 412 413 414 415 416 417 418 419
config RTC_DRV_V3020
	tristate "EM Microelectronic V3020"
	help
	  If you say yes here you will get support for the
	  EM Microelectronic v3020 RTC chip.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-v3020.

comment "on-CPU RTC drivers"

config RTC_DRV_OMAP
	tristate "TI OMAP1"
J
Jan Engelhardt 已提交
420
	depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730
A
Alessandro Zummo 已提交
421 422 423
	help
	  Say "yes" here to support the real time clock on TI OMAP1 chips.
	  This driver can also be built as a module called rtc-omap.
424

425 426
config RTC_DRV_S3C
	tristate "Samsung S3C series SoC RTC"
J
Jan Engelhardt 已提交
427
	depends on ARCH_S3C2410
428 429 430 431 432 433 434 435 436 437 438 439 440
	help
	  RTC (Realtime Clock) driver for the clock inbuilt into the
	  Samsung S3C24XX series of SoCs. This can provide periodic
	  interrupt rates from 1Hz to 64Hz for user programs, and
	  wakeup from Alarm.

	  The driver currently supports the common features on all the
	  S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
	  and S3C2442.

	  This driver can also be build as a module. If so, the module
	  will be called rtc-s3c.

441 442
config RTC_DRV_EP93XX
	tristate "Cirrus Logic EP93XX"
J
Jan Engelhardt 已提交
443
	depends on ARCH_EP93XX
444 445 446 447 448 449 450
	help
	  If you say yes here you get support for the
	  RTC embedded in the Cirrus Logic EP93XX processors.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-ep93xx.

451 452
config RTC_DRV_SA1100
	tristate "SA11x0/PXA2xx"
J
Jan Engelhardt 已提交
453
	depends on ARCH_SA1100 || ARCH_PXA
454 455 456 457 458 459
	help
	  If you say Y here you will get access to the real time clock
	  built into your SA11x0 or PXA2xx CPU.

	  To compile this driver as a module, choose M here: the
	  module will be called rtc-sa1100.
460

461 462
config RTC_DRV_SH
	tristate "SuperH On-Chip RTC"
P
Paul Mundt 已提交
463
	depends on RTC_CLASS && SUPERH
464 465 466 467 468 469 470
	help
	  Say Y here to enable support for the on-chip RTC found in
	  most SuperH processors.

 	  To compile this driver as a module, choose M here: the
	  module will be called rtc-sh.

471
config RTC_DRV_VR41XX
472
	tristate "NEC VR41XX"
J
Jan Engelhardt 已提交
473
	depends on CPU_VR41XX
474 475 476 477 478 479
	help
	  If you say Y here you will get access to the real time clock
	  built into your NEC VR41XX CPU.

	  To compile this driver as a module, choose M here: the
	  module will be called rtc-vr41xx.
480

481 482 483 484 485 486 487 488 489 490
config RTC_DRV_PL030
	tristate "ARM AMBA PL030 RTC"
	depends on ARM_AMBA
	help
	  If you say Y here you will get access to ARM AMBA
	  PrimeCell PL030 RTC found on certain ARM SOCs.

	  To compile this driver as a module, choose M here: the
	  module will be called rtc-pl030.

491 492
config RTC_DRV_PL031
	tristate "ARM AMBA PL031 RTC"
J
Jan Engelhardt 已提交
493
	depends on ARM_AMBA
494 495
	help
	  If you say Y here you will get access to ARM AMBA
A
Alessandro Zummo 已提交
496
	  PrimeCell PL031 RTC found on certain ARM SOCs.
497 498 499 500

	  To compile this driver as a module, choose M here: the
	  module will be called rtc-pl031.

501 502
config RTC_DRV_AT32AP700X
	tristate "AT32AP700X series RTC"
J
Jan Engelhardt 已提交
503
	depends on PLATFORM_AT32AP
504 505 506 507
	help
	  Driver for the internal RTC (Realtime Clock) on Atmel AVR32
	  AT32AP700x family processors.

A
Andrew Victor 已提交
508
config RTC_DRV_AT91RM9200
509 510 511 512 513 514 515 516
	tristate "AT91RM9200 or AT91SAM9RL"
	depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
	help
	  Driver for the internal RTC (Realtime Clock) module found on
	  Atmel AT91RM9200's and AT91SAM9RL chips.  On SAM9RL chips
	  this is powered by the backup power supply.

config RTC_DRV_AT91SAM9
517
	tristate "AT91SAM9x/AT91CAP9"
518 519
	depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
	help
520 521 522 523
	  RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
	  (Real Time Timer). These timers are powered by the backup power
	  supply (such as a small coin cell battery), but do not need to
	  be used as RTCs.
524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550

	  (On AT91SAM9rl chips you probably want to use the dedicated RTC
	  module and leave the RTT available for other uses.)

config RTC_DRV_AT91SAM9_RTT
	int
	range 0 1
	default 0
	prompt "RTT module Number" if ARCH_AT91SAM9263
	depends on RTC_DRV_AT91SAM9
	help
	  More than one RTT module is available.  You can choose which
	  one will be used as an RTC.  The default of zero is normally
	  OK to use, though some systems use that for non-RTC purposes.

config RTC_DRV_AT91SAM9_GPBR
	int
	range 0 3 if !ARCH_AT91SAM9263
	range 0 15 if ARCH_AT91SAM9263
	default 0
	prompt "Backup Register Number"
	depends on RTC_DRV_AT91SAM9
	help
	  The RTC driver needs to use one of the General Purpose Backup
	  Registers (GPBRs) as well as the RTT.  You can choose which one
	  will be used.  The default of zero is normally OK to use, but
	  on some systems other software needs to use that register.
A
Andrew Victor 已提交
551

552 553
config RTC_DRV_BFIN
	tristate "Blackfin On-Chip RTC"
554
	depends on BLACKFIN
555 556 557 558 559 560 561
	help
	  If you say yes here you will get support for the
	  Blackfin On-Chip Real Time Clock.

	  This driver can also be built as a module. If so, the module
	  will be called rtc-bfin.

N
Nobuhiro Iwamatsu 已提交
562 563
config RTC_DRV_RS5C313
	tristate "Ricoh RS5C313"
J
Jan Engelhardt 已提交
564
	depends on SH_LANDISK
N
Nobuhiro Iwamatsu 已提交
565 566 567
	help
	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.

568 569 570 571 572 573 574 575
config RTC_DRV_PPC
       tristate "PowerPC machine dependent RTC support"
       depends on PPC_MERGE
       help
	 The PowerPC kernel has machine-specific functions for accessing
	 the RTC. This exposes that functionality through the generic RTC
	 class.

J
Jan Engelhardt 已提交
576
endif # RTC_CLASS